Exsys EX-6072PoE User manual

1

Thank you for purchasing this Dual Channel PoE (PSE) Gigabit

Ethernet PCI Express Card It is the fastest LAN host adapter available

in the market that is specially designed to connect dual channel

gigabit LAN interface to any computer with PCIe (PCI Express) slots It

delivers isolated 48V DC power over Ethernet cable for PoE (PD)

devices It also supports crossover detection and auto-correction

feature for the easy network cabling

Features:

Supports Tow PoE (PSE) Gigabit Ethernet Ports

Integrated 10/100/1000 Transceiver

Supports PoE Speci ications IEEE 802.3at Type 1 and 2

Microso t NDIS5, NDIS6 Checksum O load (IPv4, IPv6, TCP, UDP) and

Segmentation Task-o load (Large send v1 and v2) support

Supports Jumbo Frame to 9K bytes

Fully Compliant with IEEE 802.3 IEEE 802.3u, IEEE 802.3ab

Supports Win98SE, ME, 2K, XP, XP64, Vista, Win7 and others

EX-6072PoE

2-Port PoE (PSE) Gigabit Ethernet PCIe Card

1. Introduction

2. Board and Bracket Layout

Link (Activity) LEDs

(Green)

PoE On LEDs

(Yellow)

Short bracket will be

assembled i the low

pro ile model is shipped

J3:

Large 4-pin AUX

Power Connector

J4:

SATA15-pin AUX

Power Connector

2-Port PoE (PSE) Gigabit Ethernet PCIe Card

2

Due to the hot-plug feature of the PCI Express, the installation of the

PCIe Dual Channel Gigabit Ethernet card is quite straightforward

1. Turn the system power OFF be ore installation!

2. Use static electricity discharge precautions. To avoid damaging

any components on the card, handle it by edges.

3. Remove the chassis cover rom your computer

4. Since this Card needs 12V to generate PoE power to its RJ45

connectors, please connect power supply cable to J3 (large

4-pin type) or J4 (SATA 15-pin type) power connectors

5. Locate an unused PCI Express slot (typically white and smaller)

and remove the corresponding slot cover rom computer

chassis.

6. Plug the Dual Channel Ethernet PCIe card to the unused PCI

Express expansion slot and attached the I/O card bracket to the

computer chassis screw.

7. Put the chassis cover back on the computer.

8. Turn ON the power o your computer and peripherals.

9. Proceed with So tware Driver Installation.

10. Installing LAN cables

Connect the LAN cables to both RJ45 connectors of the Dual

Channel Ethernet PCIe card Please check the LEDs’ status as

follows:

The ‘LINK(ACT)’ LED will light if link on However, the same

LEDs will flash when transferring data

The ‘PoE’ LEDs will light up if a (PoE) PD is connected In this

case, the 48V DC power was applied on the LAN cable

Otherwise, if the ‘PoE’ LED is off, the device is not a (PoE) PD

and the LAN cable does NOT carry 48V DC power on it



LED Name Color LED Function

LINK(ACT) Green Steady on: Linked

Blinking: Transferring Data

PoE

Yellow Steady on: PoE Enabled

O : PoE Disabled

3. Installing the Gigabit Ethernet PCIe Card

2-Port PoE (PSE) Gigabit Ethernet PCIe Card

3

The Gigabit Ethernet drivers are shipped in the following folder of the

driver CD

Please browse to the corresponding driver folder when Windows ask

you to specify the driver location Then follow the on-screen

instructions of the Windows to complete the installation

You can use Device Manager to check the installation Here are the

screen shots showed you that it was installed correctly:

2 Gigabit Ethernet

ports shown here

4. Windows Driver Installation

2-Port PoE (PSE) Gigabit Ethernet PCIe Card

4

4 PCI-to-PCI bridge

devices appeared

Table of contents

Popular PCI Card manuals by other brands

ERMA

ERMA SSI 1417 instruction manual

SIIG

SIIG CyberSerial Dual PCI Software installation

Moxa Technologies

Moxa Technologies CP-102E Quick installation guide

I-Bus

I-Bus IBC2602 user guide

Chelsio Communications

Chelsio Communications T5 Series Installation and user guide

Conrad Electronic

Conrad Electronic 97 46 71 operating instructions

Micro Innovations

Micro Innovations USB650A Quick installation guide

KTI Networks

KTI Networks KF-310 user guide

Asus

Asus SpaceLink WL230 user manual

SIIG

SIIG SC2475 Quick installation guide

TRENDnet

TRENDnet TEW-703PI Quick installation guide

Belkin

Belkin F5D7000F user manual

Pericom

Pericom PI7C7100 manual

ADLINK Technology

ADLINK Technology cPCI-3548 user manual

Digium

Digium TE200 Series user manual

Allo.com

Allo.com 2nd Gen E1/T1/J1 Quick installation guide

Western Digital

Western Digital FireWire PCI Adapter installation guide

Pyle

Pyle Gamelink PLINK1 user guide