Exsys EX-44088 User manual
1
Congratulation on your purchasing this high performance PCI Express
multi-serial host adapter. The adapter is high speed PCI Express bus
based and plug-and-play compliant. Its serial ports are fully 16C9 0
UART compatible with most of the RS232C devices available from the
market.
Features:
Full x1 PCI Express Throughput, 250Mbytes/sec
Fully Compl ant w th PCI Express Base Spec f cat ons, Rev s on 1.0a
256-byte FIFO16C550 UARTs, Fully Compat ble w th 16C550, Baud Rate
up to 921.6Kbps
Supports 8S RS232 ports over one s ngle DB62 Octopus Cable
Supports W n 2000 and XP, 2003, 2008, V sta, W n 7, 8 and L nux
EX-44088
8S RS232 Mult Ser al PCI Express Card
1. Introduct on
2. Board Layout
8-port DB62 to
DB9MX8 Octopus
Cable
J5: Aux. Power
Connector
JP5: Aux Power
Source Selector
JP4: Power over External
Connector Enable/D sable
8S RS232 Multi Serial PCI Express Card
2
JP4 and JP5 - External Power Selector: These jumpers were used
to provide the external power to pin# 8 of the external
connector. JP4 will enable or disable the power over the pin# 8.
JP is used to select the power source ( V or 12V? from PCIe
golden finger or J AUX power connector?).
JP4 Sett ngs
The pin# 8 is connected to GND, no
power supplied to DB62’s pin# 8.
(default)
The external connector DB62’
s pin# 8
will be connected to a DC power
source. The power source will be
determinted by the JP .
Warn ng!!!
At th s sett ng, please do NOT connect
the normal octopus cable sup
pl ed
w th th s product because the p n#58
was connected to GND n th s cable. It
w ll short the power source to GND and
may damage your motherboard or
power supply. Th s sett ng s des gned
for your appl cat ons that need to
power from p n#58, and you nee
d your
spec cal cable nstead of the normal
octopus cable come w th th s product.
JP5 Sett ngs
Power source is + VDC, from J
AUX
power connector.
(default)
3. Jumper Sett ngs
GND
PWR
GND
PWR
X5V
X12V
I12V
8S RS232 Multi Serial PCI Express Card
3
Power source is +12VDC, from J
AUX
power connector.
Power source is +12VDC, from PCI
Express golden finger (motherboard’
s
PCIe slot).
1. Turn the system power OFF before nstallat on!
2. Use stat c electr c ty d scharge precaut ons.
3. Remove the chass s cover from your computer
4. Locate an unused PCI Express slot (typ cally wh te and smaller)
and remove the correspond ng slot cover from computer
chass s.
5. Plug the I/O card to the unused PCI Express expans on slot and
attached the I/O card bracket to the computer chass s screw.
6. Install ng the suppl ed DB62-to-DB9X8 octopus cable and ser al
cables to your ser al dev ces.
7. Put the chass s cover back on the computer.
8. Turn ON the power of your computer and per pherals.
9. Proceed w th Software Dr ver Installat on.
4. Install ng the PCI Express I/O Adapter
X5V
X12V
I12V
X5V
X12V
I12V
8S RS232 Multi Serial PCI Express Card
4
10.
11.
Note:
PLEASE DO NOT LET WINDOWS AUTO SEARCH THE DRIVERS ON THE CD,
it will cause problems because the INF files will be conflict in this case.
Instead, please browse to the correct location (folder) manually to
make sure the correct drivers are chosen and installed correctly.
DSUB62-Female Connector P n Ass gnments
6
. P n Ass gnments
1
22
43
21
42
62
5. Software
Dr ver
Installat on
Dr vers are n each
correspond ng folder
8S RS232 Multi Serial PCI Express Card
5
P n S gnal P n S gnal P n S gnal
1 TXD1 22 RXD1 43 CTS1
2 DTR1 23 DSR1 44 RTS1
3 RXD2 24 DCD1 45 GND
4 DSR2 25 TXD2 46 CTS2
5 DCD2 26 DTR2 47 RTS2
6 TXD3 27 RXD3 48 CTS3
7 DTR3 28 DSR3 49 RTS3
8 RXD4 29 DCD3 50 GND
9 DSR4 30 TXD4 51 CTS4
10 DCD4 31 DTR4 52 RTS4
11 RXD 32 GND 53 CTS
12 DSR 33 TXD 54 RTS
13 DCD 34 DTR 55 GND
14 TXD6 35 RXD6 56 CTS6
15 DTR6 36 DSR6 57 RTS6
16 RXD7 37 DCD6 58 PWR(*)
17 DSR7 38 TXD7 59 CTS7
18 DCD7 39 DTR7 60 RTS7
19 RXD8 40 GND 61 CTS8
20 DSR8 41 TXD8 62 RTS8
21 DCD8 42 DTR8
*Note: Pin# 8 will be set to PWR or GND according to the JP3 jumper
settings.
8S RS232 Multi Serial PCI Express Card
6
Type Spec f cat ons
Connector
Cable
Bus Interface
Number of Ports
RS-232 Signals
Baud Rate
Data Bits
Stop Bits
I/O address/IRQ
Parity
Flow Control
Power Requirement
Operating Temperature
Operating Humidity
Storage Temperature
DB62 Female
DB62M-to-DB9MX8 Octopus type
PCI Express x 1
8
TXD, RXD, RTS, CTS, DTR, DSR, DCD, GND
110 bps to 921.6Kbps
,6,7,8
1, 1. , 2
Plug-and-Play (various)
None, Even, Odd
RTS/CTS, XON/XOFF
3.3V/9 0mA
0 to °C(32 to 132°F)
to 9 % RH
-20 to 8 °C (-4 to 18 °F)
7
. Spec f cat ons
This manual suits for next models
1
Table of contents
Other Exsys PCI Card manuals
Exsys
Exsys EX-11087 User manual
Exsys
Exsys EX-16500E User manual
Exsys
Exsys EX-44140-2 User manual
Exsys
Exsys EX-12001-2 User manual
Exsys
Exsys EX-S91002 User manual
Exsys
Exsys EX-6072-4K User manual
Exsys
Exsys EX-44010 User manual
Exsys
Exsys EX-3512 User manual
Exsys
Exsys EX-11066 User manual
Exsys
Exsys EX-6410 User manual
Exsys
Exsys EX-45362 User manual
Exsys
Exsys EX-41054 User manual
Exsys
Exsys EX-44342 User manual
Exsys
Exsys EX-60112 User manual
Exsys
Exsys EX-44062 User manual
Exsys
Exsys EX-60102 User manual
Exsys
Exsys EX-44012 User manual
Exsys
Exsys EX-44041-2 User manual
Exsys
Exsys EX-3508 User manual
Exsys
Exsys EX-16450 User manual
Popular PCI Card manuals by other brands
ERMA
ERMA SSI 1417 instruction manual
SIIG
SIIG CyberSerial Dual PCI Software installation
Moxa Technologies
Moxa Technologies CP-102E Quick installation guide
I-Bus
I-Bus IBC2602 user guide
Chelsio Communications
Chelsio Communications T5 Series Installation and user guide
Conrad Electronic
Conrad Electronic 97 46 71 operating instructions
