Evolur Infinity Twin Connector 366 User manual
Important: Keep these instructions for future reference.
Safety Cozy Fashion
MODEL NO.:#366
USER MANUAL Infinity Twin Connector
Compatible with: Evolur Infinity Baby Stroller, #478
03
WARNING
CARE AND MAINTENANCE
FRAME:
Wipe the frame with a damp cloth and mild soap. Use a clean, dry cloth or towel to
wipe away excess water and soap.
PLASTIC PARTS :
Wipe with a damp cloth and mild soap. Use a clean, dry cloth or towel to wipe away
excess water and soap.
Do not use abrasives, solvents, strong detergents, or household cleaners. These
products can scratch, discolor, and weaken the plastic or cause corrosion on metal
surfaces.
Storage:
To prevent damage to plastic parts, store away from extreme heat.
IMPORTANT!
Failure to follow these warnings and the assembly instructions
could result in serious injury or death. To ensure proper use, store
this user guide in a convenient place so it can be consulted when
needed.
Read these instructions carefully before using this product.
Always push both stroller handle at same time when using the twin
connector.
•ADULT ASSEMBLY REQUIRED.
•NEVER LEAVE CHILD UNATTENDED. Always keep child in view while in
stroller.
•Avoid serious injury from falling or sliding out. Always use harness to
secure child.
•Avoid finger entrapment or injury. Always ensure any child occupants or
bystanders are away from the stroller while folding or unfolding.
•Always make sure that the stroller is fully open and locked before use.
•Always set the parking brake when parking the stroller.
•Do not hang or place items on the stroller handle or frame except for
those approved by Evolur. They may cause an unstable or hazardous
condition.
•Only use Evolur approved child restraints, accessories, and replacement
parts with this stroller.
•Do not overload basket – Maximum weight in basket is 10 lbs (4.5 kg).
Overloading the basket may cause the stroller to become unstable.
•Do not allow children to climb on or play with the stroller.
•Never use stroller on stairs or escalators.
•Stroller is intended for walking speed only. Do not use while jogging,
skating, etc.
2
1
3
4
5
6
Parts List
04
3
2
4
56
Connector Front
Connector Back
Connector Receiver Front Left
Connector Receiver Front Right
Connector Receiver Back Left
Connector Receiver Back Right
Locking
Buckle
Buckle
Anchor
Bracket
Thank you for choosing Evolur and congratulations on joining The DOM
Family, a family that has been transforming lives for 30 years! We appreciate
your feedback and wish you the very best in the coming years with your new
addition. If you have any questions or concerns please don’t hesitate to reach
out and a trusted DOM representative will assist you. Thank you again for
entrusting us to supply you with the safest, functional and affordable baby
products and accessories. Feel free to follow us on Facebook and Instagram
for further opportunities and offers.
Please check to make sure that all of the following parts listed are
included in the box when opened. If there are any missing parts,
please contact Evolur before using the Infinity twin connector
.
Locking
Button
Locking
Button
Release
Button
1
1. Install Connector Receiver F/L: Attach Connector Receiver F/L to the front leg of your
Infinity stroller. Make sure that the Anchor Bracket is in position as in Fig. A/B. Then, clamp
the buckle and lock the Connector Receiver F/L using the Locking Buckle. Fig. C.
2. Install Connector Receiver B/L: Attach Connector Receiver B/L to the rear leg your
Infinity stroller. Clamp the buckle on the lower most part of the leg as shown in Fig. D/E.
Then, clamp the buckle and lock the Connector Receiver B/L using the Locking Buckle.
Fig. F.
Locking Buckle
Rear Wheel
Housing
CLICK!
CLICK!
Install the Twin Connector
05
Locking Buckle
A B C
D E F
G H I
Anchor Bracket
3.
Slide Connector Front into Connector Receiver F/L and Connector Back into Connector
Receiver B/L. Make sure that both locking buttons click.
4.
Repeat A - F to install Connector Receiver F/R and Connector Receiver B/R to the right
side of your Infinity stroller. Fig. I
Buckle
Locking Buckle
5. Connect to twin stroller: Slide Connector Front/Back into Connector Receiver F/R & B/R
at same time. You can hold one stroller with one hand and push the other stroller into the
connector. Make sure that both locking buttons click as shown in Fig. J/K.
6. Twin Stroller, Fig. L/M/N.
CLICK!
CLICK!
Install the Twin Connector
O P Q
LMN
J K
Release
Button
Locking Buckle
Locking Botton
Attention: Remove Connector Set before folding the stroller.
7. To Separate the stroller, simply to push down the Release Button, then push forward on the
Infinity stroller on the right, as shown in Fig. O/P.
8. To detach the Connector Receivers when Twin stroller function is not needed, simply push
the locking button on the Connector Receiver and un-clamp locking buckle, as shown in Fig. Q
Dream On Me Inc.
1532 S Washington Ave, Piscataway TWP, NJ 08854
Tel: 732-752-7220 Fax: 732-752-7221
MADE ZHONG SHAN, CHINA
Table of contents
