ETNA KGV158WIT User manual
Installation of Support Feet
In the support feet installation kit supplied in the product package, there are 4 pieces of
support feet, 4 pieces of screw and 4 pieces of washer. Screw the support feet on the product
without the washers as shown in Figure 1. Then place the product on the workbench where it
is to be installed and check whether it stands still or not. Depending on the planarity of the
workbench, in case one of the support feet do not touch on the workbench, use the washers
given in the installation kit as many as required, as shown in Figure 2.
Figure 1 Figure 2
52168492
Installatie van de kunststof steunvoetjes.
In dit zakje zijn meegeleverd: 4 stuks steunvoetjes, 4 stuks schroeven en 4 stuks stelringen.
Schroef de steunvoeten aan het product zonder de stelringen zoals getoond in figuur 1.
Plaats de kookplaat op de tafel waar deze moet worden geïnstalleerd en controleer of deze
vlak staat. Gebruik een of meer extra stelring(en), om de kookplaat stabiel en vlak af te
stellen. Zie figuur 2. Uit veiligheidsoogpunt is het belangrijk dat de kookplaat stabiel op de
tafel staat.
Figuur 2Figuur 1
Other manuals for KGV158WIT
1
This manual suits for next models
4
Table of contents
Languages:
Other ETNA Hob manuals
ETNA
ETNA EKP327WIT/E2 User manual
ETNA
ETNA A814VRVSA1E/E2 User manual
ETNA
ETNA KI560K Series User manual
ETNA
ETNA KIV254RVS User manual
ETNA
ETNA A390 User manual
ETNA
ETNA KIV160RVS User manual
ETNA
ETNA T302ZT User manual
ETNA
ETNA T007VB Series User manual
ETNA
ETNA KIV264RVS User manual
ETNA
ETNA A280 User manual
ETNA
ETNA A814VRVS User manual
ETNA
ETNA KIV360WIT User manual
ETNA
ETNA A822 User manual
ETNA
ETNA KI260ZT User manual
ETNA
ETNA 1921VW User manual
ETNA
ETNA KIV12ZIL/E01 User manual
ETNA
ETNA T1024ZT User manual
ETNA
ETNA KI259ZT Operating and maintenance manual
ETNA
ETNA T380ZT User manual
ETNA
ETNA A500A User manual
