Page 6
990EL-I02-121016
Read the instructions before installing or using this appliance.
The cooker must be installed in accordance with: All relevant
British Standards / Codes of Practice and the relevant Building / IEE
regulations
Location of the Oven
This appliance is designed for domestic cooking only. Use for any
other purpose could invalidate any warranty or liability claim.
For your own safety we recommend that a competent person
installs your cooker. This cooker is designed to be installed using
two standard 13 Amp plugs. A qualified electrician is not required.
Electrical connection
Ovens with a three-pole power supply cable are designed to
operate with alternated current at the supply frequency and
voltage indicated on the data plate (located on the inner door panel
of the control compartment).
Connecting the power supply cable to the mains:
The appliance is supplied fitted with two 1.5 metre cables and two
normalized 13 amp plugs which correspond to the load indicated on
the data plate. Before making the connections check that: the
circuit breakers or fuses of the home system can support the
appliance load (see data plate); the power supply system has a
sufficient earth connection which complies with the provisions of
current regulations and the law; there is easy access to the socket.
Do not use reducers or adapters as these could cause heating or
burning.
