EQUILAB SMARTMARKER User manual
SMARTMARKER
1
Components
direct connect cable
smartmarker
marker
release
power/pairing button
new page
charging case
marker cap
receiver
Bluetooth mode button
user guide
receiver USB port
USB charge port
SMARTMARKER
eraser cap
accessory
color rings
mounting
bracket
*Ferrite core : CU0930B
Tablet Computer
Phone
Equil Note
Equil Note
Tips
❶Download and install Equil Note
iOS
Android™
Mac OS X®
Windows
❷Charge your marker and receiver
2
Record and organize written
notes. Edit,enhance and share
them withfriends and colleagues.
Convert your handwriting to text
for easy editing and sharing.
Whencharging, plug
the USBcable into a
standard USB port or
use a wall adapter for
faster charging.
You mayuse any
micro-USBcable to
charge your Equil
Smartmarker.
the App Store
Google Play™
the App Store
support.myequil.com
available onplatform
USB
Make sure to fullycharge Equil
Smartmarker before use.
Charging takes approximately
two hours.
Once charged, your Equil
Smartmarker canbe used
continuously for up to eight hours.
3
Tips
❸Set Bluetooth Mode
To pair with your iPhone/iPad/iPod, press
the BT mode button to select iOS.
The Bluethooth mode button is found on the side of
the receiver. The default mode is iOS.
Whenno Bluetooth
LEDsare glowing,
bluetooth isdisabled
and the receiver
consumes less
batterypower.
Whenswitching modes,
wait a fewseconds
before drawing again to
avoid losing strokes.
To pair with your Android, Mac OS or
Windows device, press the BT mode
button to select “others”.
To turn Bluetooth OFF, press and hold
the BT button for 3 seconds. Whiteboard
notes will be saved to internal memory.
Import your notes next time you
connnect to your device.
4
Tips
View the Tutorial
For more detailed
pairing info for your
specific device, refer to
the Equil Note software
tutorial.
To pair to a new device
whenthe first device is
nearby, you mayneed
to turn off Bluetoothon
the first device.
❹Pair receiver with yourdevice
❶Turn the receiver off.
❷Hold power button for 2 seconds
until the Bluetooth LED blinks fast.
❸Turn on Bluetooth for the device
you are pairing and select your Equil
Smartmarker in the devices list.
❹When pairing is complete, the
Bluetooth LED will start to blink slowly
(approx. once every 2 seconds).
5
Tips
❺Place receiver on yourwhiteboard
Position the receiver at either side of your
writing area, centered vertically.
Positionthe receiver
where it will be
convenient to press the
new-page button.
If your board area is
wider than 8feet, place
the receiverinthe center
and write notesonboth
sides, up to 16feet wide.
If you write too far from
the receiver, it will alert
you to stay within the
recording area.
All Other Surfaces
❶Attach adhesive
bracket to receiver
❷Remove protective
backing
❸Place receiver on
surface, press firmly
for best adhesion
Metal Whiteboards
up to 8’ wide (2.44m)
whiteboard surface
no-draw
zone
left side right side
up to 5’ high
(1.52m)
up to 8’ wide (2.44m)
6
Tips
❻Install the dry-erase marker
When your smartmark-
er battery is running
low, the amber LED will
blink 5 times when you
turn it on to remind you
to recharge soon.
The smartmarker has
no power button. It will
to prevent the marker
from drying out.
The marker color in the
software is determined
by the color ring used
on the smartmarker,
regardless of what color
marker is placed inside.
Remove the
Smartmarker cap
Replace the
Smartmarker cap
Change the color
ring if desired
Insert the
corresponding dry
erase marker
Open the
marker barrel
7
7 Install the eraser batteryTips
When your eraser
battery is running low,
the amber LED will
blink 5 times when you
turn it on to remind you
to recharge soon.
The eraser has no
power button. It will
The eraser can be
“parked” on a metal
whiteboard surface.
The eraser “parking
spot” allows you to
store the eraser on
non-metalic surfaces.
8 Install eraser “parking spot”
Open the
battery cover Install battery,
negative side up
replace battery
cover
Slide downward
and remove
remove adhesive backing place bracket horizontally on surface
–
+
8
Tips
You can also take
notes without your
phone, tablet or
computer. All of your
strokeswill be saved in
memory, and you can
sync them back to
your device whenits
convenient.
The receiver memory
will store at least 1000
pages of written
content, so let your
ideasflow!
Learn about all of the great features of Equil Smartmarker
through the tutorials and user guide included with
the Equil Note App.
Finished!
Now you can start recording whiteboard notes directly
to your smart phone, tablet or computer!
9
Recording notes to memory
When recording notesdirectly to the receiver memory, there are a few helpful
indicators that appeararound the New Page Button.
Color Action Meaning
White Breathing Ready to Record
White Solid, Brighter Receiving Pen Strokes
White Rotating Creating New Page
Red Slow Blink Nearing recording limit
Red Solid, Brighter Reached recording limit
Other manuals for SMARTMARKER
2
