Equator 2440 User manual
There is one button, located at the center of the control panel, to
turn the dishwasher on or off and also to start the wash program.
Press the On/Off button for 3 seconds to power the appliance on.
Select the Wash Programs by pressing the Program button. Once
selected, the Program number (e.g. P1, P2) flashes on the Display
Panel and also the number of minutes for the cycle.
If Program button is held down for 3 seconds, the program is
cancelled.
Half Load button - Press this button to select either upper or lower
basket, if dishwasher is only half full. The red LED light will show
your selection.
Delay button - You can delay the start of the program.
Pressing this button will ad time in one-hour increments.
to cancel Delay, press and hold the Start button for 3 seconds.
Options button - You may select:
Sanitize - increases the water temperature in the final rinse.
High Temp - increases water temperature and wash time.
Extra Dry - increases water temperature.
Rinse Aid - If rinse aid needs to be added, the Rinse Aid indicator
light will illuminate.
Start / Pause button
This manual suits for next models
3
Other Equator Dishwasher manuals
Equator
Equator WB 80 User manual
Equator
Equator PLS 600 V Service manual
Equator
Equator BB 65 User manual
Equator
Equator pmn User manual
Equator
Equator SF 924 Guide
Equator
Equator CD400 User manual
Equator
Equator 2440WBT User manual
Equator
Equator PLS 600 V Guide
Equator
Equator WB 82 User manual
Equator
Equator BB 65 Instruction Manual
