Epson PowerLite 1750 System manual

Other manuals for PowerLite 1750

5

This manual suits for next models

3

Table of contents

Other Epson Projector manuals

Epson

Epson PowerLite 8300i withEasyMP.net module User manual

Epson

Epson PowerLite S1 User manual

Epson

Epson EX5210 User manual

Epson

Epson Megaplex MG-50 Specification sheet

Epson

Epson 410W - PowerLite WXGA LCD Projector System manual

Epson

Epson Megaplex MG-50 Reference guide

Epson

Epson PowerLite Pro G5450WUNL Reference guide

Epson

Epson PowerLite 420 User manual

Epson

Epson EB-585W User manual

Epson

Epson PowerLite Cinema 550 User manual

Epson

Epson EB-Z8455WU User manual

Epson

Epson EB X6 User manual

Epson

Epson PowerLite 50c User manual

Epson

Epson EB-G5950 User manual

Epson

Epson PowerLite 750c Specification sheet

Epson

Epson PowerLite 1266 Specification sheet

Epson

Epson PowerLite Pro G5150NL User manual

Epson

Epson PowerLite W16 Specification sheet

Epson

Epson PowerLite 1220 User manual

Epson

Epson PowerLite S1 User manual

Epson

Epson PowerLite 420 User manual

Epson

Epson EB-X21 Installation instructions

Epson

Epson V11H181020SC - MovieMate 25 WVGA LCD... Dimensions

Epson

Epson PowerLite 955W Reference guide

Popular Projector manuals by other brands

iEmmet

iEmmet MP-312 user manual

Sony

Sony VPL-HS10 Marketing Specifications & Features manual

Sony

Sony VPL-HW65ES Quick reference manual

Toshiba

Toshiba TLP-791U Specifications

Philips

Philips LC1341 Declaration of conformity

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB operating instructions

NEC

NEC NP600S EDU Specifications

BenQ

BenQ SH753P user manual

Eiki

Eiki EK-623U series quick start guide

Christie

Christie LHD700 user manual

Navitar

Navitar FX instruction manual

InFocus

InFocus LitePro 560 user guide

Sony

Sony SRX-R815P operating instructions

Vivitar

Vivitar DP1500 X specification

Acer

Acer C20 Series manual

Asus

Asus ZenBeam Latte user manual

BOXLIGHT

BOXLIGHT CP-322i/CP-634i user manual

JVC

JVC 1108TTH-AO-AO instructions

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 1750 / 1760W / 1770W / 1775W

1

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury.

4. Slide the lamp cover out and lift it off.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 1750 / 1760W / 1770W / 1775W

2

6. Lift up the lamp handle and gently pull the lamp out of the projector.

Caution: Lift the lamp handle carefully to avoid damaging the handle as you pull out the lamp.

Note: The lamp(s) in this product contain mercury. Please consult your state and local

regulations regarding disposal or recycling. Do not put in the trash.

5. Lift up the metal bar securing the lamp.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 1750 / 1760W / 1770W / 1775W

3

7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right

way. Press down on the area shown to secure the lamp in place.

Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.

8. Press the metal bar down over the lamp until it clicks into place on both sides.

9. Replace the lamp cover and tighten the screw to secure it.

Note: Be sure the lamp cover is securely installed or the lamp will not come on.

Reset the lamp timer to zero to keep track of the new lamp’s usage.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 1750 / 1760W / 1770W / 1775W

4

Resetting the Lamp Timer

You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement

message and to keep track of lamp usage correctly.

Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage

information.

1. Turn on the projector.

2. Press the Menu button.

3. Select the Reset menu and press Enter.

4. Select Reset Lamp Hours and press Enter.

You see a prompt asking if you want to reset the lamp hours.

5. Select Yes and press Enter.