Epson SureColor F7170 User manual
Epson® SureColor®
F7170 Setup Guide
2|
Contents
Unpacking the Printer ...........................................................................................................................3
Assembling the Stand .............................................................................................................................6
Installing the Printer ..............................................................................................................................9
Installing the Media Feeding Unit .......................................................................................................16
Installing the Take-up Reel System ......................................................................................................19
Installing the Media Guide Bar ............................................................................................................22
Connecting to a power source ..............................................................................................................25
Setting the Language ............................................................................................................................26
Adjusting the Media System ................................................................................................................27
Loading Media ....................................................................................................................................29
Installing the Software .........................................................................................................................37
USB Installation ............................................................................................................................38
Network Installation .....................................................................................................................39
Unpacking the Printer |3
Read all of these instructions before using your printer. Also be sure to follow all warnings and instructions
marked on the printer and in the on-screen User’s Guide.
Unpacking the Printer
Before beginning assembly, make sure you have sufficient space to set up and use the printer. The
following illustration shows the minimum space required for using the printer:
Callout Distance
1 19.7 in. (500 mm)
2 3.9 in. (100 mm)
3 68.9 in. (1750 mm)
4 39.4 in. (1000 mm)
5 114.3 in. (2903 mm)
6 19.7 in. (500 mm)
7 39.4 in. (1000 mm)
8 142.5 in. (3620 mm)
4|Unpacking the Printer
When choosing a place for the printer, leave adequate room for easy access and ventilation. Avoid locations
subject to direct sunlight, excessive heat, humidity, or dust. Be sure the printer is placed on a flat, stable
location that can support 496 lb (225 kg).
Caution: Six people are required to unpack and install the printer.
You need an even larger floor space to assemble the printer and stand, so be sure to prepare a large, empty
area before unpacking them. Also make sure you save the boxes and packaging in case you need to ship the
printer later.
The following items are included with your printer:
Printer and Stand Assembly
a
Printer
Carry bars
Horizontal struts
Power cords
Software and
documentation
Ink splash
guard
Legs Waste ink
tank bracket Waste
ink tank
Translated
caution label
Cable
support
Waste ink tube
bracket
Unpacking the Printer |5
Media System Assembly
The item below can be found in the “Ink Supply System Cover 1” box.
b
26
5E
4F
2G
2D
Media feeding unit
Take-up reel
Reel brackets
Adjustment paper
Roll core
Media guide bar
Media guide
mounting brackets
Bracket
alignment tool
Mounting
hardware
Mounting hardware
6|Assembling the Stand
Assembling the Stand
Make sure you have the following items before assembling the stand.
1. Remove the tape from the larger horizontal strut, then slide the strut into both of the legs.
2. Use the long end of the hex wrench to tighten the pre-placed screws on each of the legs.
a
Back of stand
Assembling the Stand |7
3. Attach the smaller horizontal strut by securing two B screws (four total) in the back of the legs.
4. Attach the waste ink tank bracket and secure it with a B screw.
5. Attach one B screw to the other side of the bracket, move the slider into place, then attach another
Bscrew.
8|Assembling the Stand
6. Temporarily fasten the waste ink tube bracket using one B screw.
7. Remove the four screws from each leg, then remove the plastic pieces.
8. Slide the mounting piece into the groove, as shown.
Installing the Printer |9
9. Slide the mounting pieces into the grooves, as shown.
10. Replace the plastic pieces and tighten all eight screws.
Installing the Printer
You need six people to install the printer; four people to carry it and two people to position it on the stand.
Use the carry bars to lift and move the printer.
10 |Installing the Printer
Make sure you have the following items before installing the printer.
1. Lock the casters and fix the stand in place. To fix the stand, rotate the feet clockwise until they’re
firmly placed on the ground.
a
Other manuals for SureColor F7170
2
Table of contents
Other Epson Printer manuals
Epson
Epson SureColor P600 Series User manual
Epson
Epson NPD4736-00 EN User manual
Epson
Epson TM-T85 Manual
Epson
Epson EPI-4000 User manual
Epson
Epson DFX-5000+ User manual
Epson
Epson Stylus Pro 5500 User manual
Epson
Epson Perfection 1200PHOTO User manual
Epson
Epson Stylus S22 User guide
Epson
Epson Stylus C62 User manual
Epson
Epson SC-B7070 User manual
Epson
Epson FX-880 - Impact Printer User manual
Epson
Epson Stylus Office BX925FWD User guide
Epson
Epson Stylus Photo 925 User guide
Epson
Epson LX-1170 User manual
Epson
Epson PictureMate Charm - PM 225 - PictureMate Charm Compact Photo... User manual
Epson
Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print... User manual
Epson
Epson Stylus Pro 4800 Portrait Edition Operating manual
Epson
Epson SureColor T-3270 User manual
Epson
Epson 4000 - Stylus Pro Color Inkjet Printer User manual
Epson
Epson DFX-8500 - Impact Printer User manual
