Epson LQ-570+ User manual

EPSON

LQ-570/1070

system, or transmitted in any form or by any means, mechanical, photocopying, recording,

or otherwise, without the prior written permission of Seiko Epson Corporation. No patent

liability is assumed with respect to the use of the information contained herein. While every

precaution has been taken in the preparation of this book, Seiko Epson Corporation assumes

no responsibility for errors or omissions. Neither is any liability assumed for damages

resulting from the use of the information contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this

product or third parties for damages, losses, costs, or expenses incurred by purchaser or third

parties as a result of: accident, misuse, or abuse of this product or unauthorized

modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly

comply with Seiko Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation shall not be liable against any damages or problems arising from the

use of any options or any consumable products other than those designated as Original Epson

Products or Epson Approved Products by Seiko Epson Corporation.

Epson and Epson ESC/P are registered trademarks and Epson ESC/P 2 is a trademark of

Seiko Epson Corporation.

IBM and IBM PC are trademarks of International Business Machines Corporation.

Nagano, Japan

User’s Guide

For United States Users

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio or television reception. However,

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause interference to radio and television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures.

lReorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

lConnect the equipment into an outlet on a circuit different from that to which the

receiver is connected

lConsult the dealer or an experienced radio/TV technician for help.

WARNING

The connection of a non-shielded equipment interface cable to this equipment will invalidate

the FCC Certification of this device and may cause interference levels which exceed the limits

established by the FCC for this equipment. It is the responsibility of the user to obtain and

use a shielded equipment interface cable with this device. If this equipment has more than one

interface connector, do not leave cables connected to unused interfaces.

Changes or modifications not expressly approved by the manufacturer could void the user’s

authority to operate the equipment.

For Canadian Users

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital

apparatus as set out in the radio interference regulations of the Canadian Department of

Communications.

Le present appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de Classe B prescrites dans le réglement sur le brouillage

radioélectrique édicté par le Ministére des Communications du Canada.

TIPS FOR PRINTING ON SINGLE SHEETS

There are a few things you should know about printing on single

sheets as opposed to continuous paper. When you print on single

sheets, you may notice that your printer prints the first page of

your file correctly but then prints too low on the next page, or that

it prints the last few lines from one page onto the next.

These differences in print position are easy to adjust; you can

simply change some of the settings in your application program as

described below to get the right results.

1. When you install an application program, it normally asks you

what printer you are using. Make sure you choose the correct

printer. See Chapter 1 for the right printer to choose.

2. Many programs include an option to set the maximum lines per

page. If your program has a lines-per-page setting and you are

using standard 8½ x 11-inch paper, set the lines per page to 61.

Note: To find the right lines-per-page setting for paper that is not

8½ x 11, create a test document using your application program.

Set your top and bottom margins to 0 and then create a file of

numbered lines from 1 to 66. When you print your file, notice

the last number printed on the first page. This is your maximum

lines-per-page setting.

3. If your program doesn’t have a lines-per-page setting, try

decreasing the top margin or increasing the bottom margin, or

both, until you get the results you want.

4. You can also try adjusting the form length setting. For a

standard 8½ x 11-inch page, try setting the form length at

10 inches.

5. Some programs also let you indicate whether you are using

single sheets or continuous paper. Make sure you choose single

sheets.

iii

Where to Get Help for United States Users

Epson America provides local customer support and service through

a nationwide network of authorized Epson dealers and Service

Centers.

Epson also provides the following support services through the

Epson Consumer Resource Center at (800) 92243911:

Assistance in locating your nearest Authorized Epson Reseller or

Service Center

Technical assistance with the installation, configuration, and

operation of Epson products

Epson technical information library fax service

Product literature with technical specifications on our current

and new products

Sales of ribbons, supplies, parts, documentation, and accessories

for your Epson product

Customer Relations.

IMPORTANT SAFETY INSTRUCTIONS

1. Read all of these instructions and save them for later reference.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Do

not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

4. Do not use this product near water.

5. Do not place this product on an unstable cart, stand, or table.

The product may fall, causing serious damage to the product.

6. Slots and openings in the cabinet and the back or bottom are

provided for ventilation; to ensure reliable operation of the

product and to protect it from overheating, these openings must

not be blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug, or other

similar surface. This product should never be placed near or

over a radiator or heat register. This product should not be

placed in a built-in installation unless proper ventilation is

provided.

7. This product should be operated from the type of power source

indicated on the marking label. If you are not sure of the type

of power available, consult your dealer or local power

company.

8. This product is equipped with a 3-wire grounding-type plug, a

plug having a third (grounding) pin. This plug will only fit into

a grounding-type power outlet. This is a safety feature. If you

are unable to insert the plug into the outlet, contact your

electrician to replace your obsolete outlet. Do not defeat the

purpose of the grounding-type plug.

9. Do not locate this product where the cord will be walked on.

10. If an extension cord is used with this product, make sure that

the total of the ampere ratings on the products plugged into the

extension cord does not exceed the extension cord ampere

rating. Also, make sure that the total of all products plugged

into the wall outlet does not exceed 15 amperes.

11. Never push objects of any kind into this product through

cabinet slots as they may touch dangerous voltage points or

short out parts that could result in a risk of fire or electric

shock. Never spill liquid of any kind on the product.

12. Except as specifically explained in the User’s Manual, do not

attempt to service this product yourself. Opening or removing

those covers that are marked “Do Not Remove” may expose you

to dangerous voltage points or other risks. Refer all servicing in

those compartments to service personnel.

13. Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

When the power cord or plug is damaged or frayed.

If liquid has been spilled into the product.

If the product has been exposed to rain or water.

If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are

covered by the operating instructions since improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the product to normal operation.

If the product has been dropped or the cabinet has been

damaged.

If the product exhibits a distinct change in performance,

indicating a need for service.

Contents

Introduction

Features

.....................................................................

Options

.....................................................................

Finding Your Way Around............................................

Warnings, Cautions,

and Notes......................................

Printer Parts

...............................................................

Chapter 1 Setting Up the Printer 1-1

Unpacking the Printer ................................................ 1-2

Choosing a Place for the Printer .................................. 1-3

Assembling the Printer............................................... 1-5

Testing the Printer .................................................... 1-10

Connecting the Printer to Your Computer ..................... 1-13

Configuring Your Software for the Printer.. ................... 1-14

Chapter 2 Paper Handling 2-1

Selecting a Paper Feeding Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Using Single Sheets

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-4

Using Continuous Paper

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-9

Switching Between Continuous Paper and Single Sheets . . . 2-21

Printing on Special Paper

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-23

Chapter 3 Using the Printer 3-1

Control Panel........................................................... 3-2

DIP Switches ........................................................... 3-6

Micro Feed .............................................................. 3-13

Tear Off .................................................................

3-16

Typestyles

............................................................... 3-19

Data Dump Mode ..................................................... 3-24

Contents

vii

Chapter 4 Using Printer Options 4-1

Cut-Sheet Feeders......................................................

4-2

Pull

Tractor .............................................................

4-12

Interface

Cards.. ....................................................... 4-14

Chapter 5 Maintenance and Transportation 5-1

Cleaning the Printer .................................................. 5-2

Replacing the Ribbon Cartridge ................................... 5-3

Transporting the Printer.............................................5-4

Chapter 6 Troubleshooting 6-1

Problems and Solutions.............................................. 6-2

Power Supply .......................................................... 6-3

Printing

................................................................... 6-4

Paper Handling

........................................................ 6-8

Options

................................................................... 6-10

Chapter 7 Technical Specifications

7-1

Printer Specifications ................................................. 7-2

Interface Specifications............................................... 7-10

Option Specifications................................................. 7-14

Initialization

.............................................................7-16

Chapter 8 Command Summary 8-1

Using the Command Summary

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8-2

Commands Arranged by Topic

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8-3

Appendix A-1

Character Tables

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-2

International Character Sets

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. ...

A-6

Glossary GL-1

Index

IN-1

viii

Contents

Introduction

Your new Epson®printer is an advanced 24-pin dot matrix printer

that combines high performance with a wide range of features.

Features

These features make your Epson printer an outstanding value:

Fast printing speed. You can print up to 252 characters per

second in 12 cpi draft mode.

Easy paper handling. The printer has four paper paths to suit

your printing needs: top, rear, bottom, and front.

Automatic paper loading. The printer automatically loads single

sheets and continuous paper.

Epson ESC/P 2. This enhanced printer control language adds

scalable fonts and improved graphics capability. With scalable

fonts, you can print characters of various sizes.

Compatibility. The printer supports the Epson ESC/P®

commands widely used in application programs written for other

Epson LQ and SQ printers.

Unique control-panel design. You can choose from nine popular

letter-quality fonts and one draft font.

The LQ-570 and LQ-1070 are basically the same printer except for

the width of their carriages. The LQ-570 has a standard width

carriage that accommodates paper up to 254 mm (10 inches) wide.

The LQ-1070 has a wide carriage that accommodates paper up to

355.6 mm (14 inches) wide,

Introduction 1

Other manuals for LQ-570+

This manual suits for next models

Table of contents

Other Epson Printer manuals

Epson

Epson LQ-690II Instruction Manual

Epson

Epson Stylus Photo 1410 Series User manual

Epson

Epson Stylus Photo 780 User manual

Epson

Epson AcuLaser C2600DTN User manual

Epson

Epson SureColor T-Series Instruction Manual

Epson

Epson Stylus C40UX User manual

Epson

Epson LQ-1050 User manual

Epson

Epson Stylus Pro 7890 Series User manual

Epson

Epson AcuLaser CX28 Series Original instructions

Epson

Epson R300 - Stylus Photo Color Inkjet Printer User manual

Epson

Epson WorkForce WF-2510 User guide

Epson

Epson Stylus 1000 User manual

Epson

Epson SC-F9200 series User manual

Epson

Epson SC-T5100 Series Manual

Epson

Epson R380 - Stylus Photo Color Inkjet Printer User manual

Epson

Epson WorkForce Pro WF-C878RB User manual

Epson

Epson PictureMate - Compact Photo Printer Guide

Epson

Epson TM-C610 User manual

Epson

Epson Expression Home XP-245 Instruction Manual

Epson

Epson Stylus C63 User manual

Epson

Epson DFX-8500 - Impact Printer User manual

Epson

Epson LQ-590 User manual

Epson

Epson 220 User manual

Epson

Epson WF-C5390 Instruction Manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide

IRA3D

IRA3D POETRY4 Original instructions

Ricoh

Ricoh Aficio AP400 operating instructions

BIXOLON

BIXOLON SRP-352plusV user manual