Epson LFP C User guide

This manual suits for next models

1

Table of contents

Other Epson Printer manuals

Epson

Epson Stylus Color 800N User manual

Epson

Epson Stylus Pro 9600 Photographic Dye Ink User manual

Epson

Epson Printer User manual

Epson

Epson WorkForce Pro WP-4010 User manual

Epson

Epson TM-T88V User manual

Epson

Epson Stylus Color 980 User manual

Epson

Epson Stylus Color 660 Instruction Manual

Epson

Epson Stylus C42 Series User manual

Epson

Epson TM-U220-i User manual

Epson

Epson Stylus C44UX series User manual

Epson

Epson SureColor S50670 User manual

Epson

Epson Stylus Color C60 Firmware update

Epson

Epson Stylus Color 900 User manual

Epson

Epson Workforce WF-7310 Series Instruction Manual

Epson

Epson Stylus C88 User manual

Epson

Epson Stylus Printer SX100 Instruction Manual

Epson

Epson WorkForce AL-C500DN User manual

Epson

Epson ActionLaser Original User manual

Epson

Epson CW-C6000A Use and care manual

Epson

Epson C120A User manual

Epson

Epson TM-U220 Series User manual

Epson

Epson Stylus C40UX User manual

Epson

Epson Stylus C80N Operating and safety instructions

Epson

Epson SureColor P5370 User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide

IRA3D

IRA3D POETRY4 Original instructions

Ricoh

Ricoh Aficio AP400 operating instructions

BIXOLON

BIXOLON SRP-352plusV user manual

EPSON LFP C & I

Startup Guide After Prolonged Shutdown

2

Epson LFP C & I

Startup Guide After Prolonged Shutdown

The contents of this guide are intended to help you get

your Epson large format printer back operational again

after a prolonged period of inactivity.

If after following the steps laid out in this guide you are

experiencing technical issues with your device, please

call our Customer Interaction Center on, 0871 423

7766* or alternatively navigate to

https://www.epson.co.uk/contactus

for more contact options.

*Calls cost 10p per minute plus network extras.

3

Epson SureColor

SC-F Series Dye Sub

4

Epson SureColor

SC-F Series Dye Sub

•Clear any dust from the printer surface, filters and print area.

•Turn on the printer if not already switched on.

•Remove any media installed in the printer.

•Check maintenance tank/waste ink bottle capacity and ink levels, replace as required.

•Go to Epson.co.uk/support to find your model and update the firmware to the latest available.

Once the firmware update process has completed, either wait for your printer to restart, or switch

back on using the power button depending on which model you have. If your printer supports

Epson Edge Dashboard you can perform the firmware update from there.

•If your model has HDK ink installed, use the stirring stick to agitate the HDK ink.

•For printer model numbers SC-F6300 and above, follow the user guide on how to perform

head/cap maintenance before proceeding to the next step.

•Perform a heavy clean from the printers control panel.

•Install the media.

•Run a nozzle check and observe the results.

•If only a few nozzles are missing run a light clean to recover, for more extensive nozzle loss

perform the heavy clean again up to a maximum of three times, running a nozzle check in

between.

5

Epson SureColor

SC-F Series DTG

6

Epson SureColor

SC-F Series DTG Recover From Storage Mode

•Clear any dust from the printer surface, filters and print area.

•Empty the waste ink bottle.

•Prepare the ink cartridges and shake the colour inks approximately 15 times over 5 secs, and the

white inks for 50 times each side over 15 secs.

•Open the cover and check the flushing box condition. Clean/replace as required.

•Switch on the printer and follow the prompts to replace the cleaning solution with the prepared

ink cartridges. Follow the instructions until the printer returns to a ready state.

•Go to Epson.co.uk/support to find your model and update the firmware to the latest available.

Restart the printer once the firmware update has completed.

•Carry out the head/cap maintenance as laid out in the user guide.

•Perform a cleaning cycle from the printers control panel.

•Run a nozzle check and observe the results.

•If only a few nozzles are missing run a light clean to recover, for more extensive nozzle loss

perform the heavy clean up to a maximum of three times, running a nozzle check in between.

7

Epson SureColor

SC-F Series DTG Recover

•Clear any dust from the printer surface and print area.

•Open the cover and check the flushing box condition. Clean/replace as required.

•Turn on the printer if not already switched on.

•Check maintenance tank capacity and ink levels, empty and change as required.

•Go to Epson.co.uk/support to find your model and update the firmware to the latest available.

Once the firmware update process has completed, either wait for your printer to restart, or

switch back on using the power button depending on which model you have.

•Remove the ink cartridges and shake the colour inks approximately 15 times over 5 secs, and the

white inks for 50 times each side over 15 secs.

•If the white inks were replaced with cleaning solution at shutdown, do not switch back to white

ink until there is a requirement to print dark garments.

•Carry out the head/cap maintenance as laid out in the user guide.

•Perform a heavy clean from the printers control panel.

•Run a nozzle check and observe the results.

•If only a few nozzles are missing run a light clean to recover, for more extensive nozzle loss

perform the heavy clean up to a maximum of three times, running a nozzle check in between.

Cleaning carts (capacity required) can be used to perform a head wash on the effected channel

for extreme cases.