Epson EPL-N2500 Installation instructions

Safety Instructions

Laser Printer Precautions

This printer uses laser technology. Follow the precautions below to ensure

safe, efficient operation.

❏Unless specifically instructed in the

printer’s documentation, be careful not

to touch the fuser, which is marked

CAUTION HOT SURFACE. If the printer has

been in use, the fuser may be very hot.

❏Do not attempt to modify or take the

imaging cartridge apart. It cannot be

refilled.

❏Do not touch the toner and avoid all

toner contact with your eyes.

❏Do not dispose of used imaging

cartridges in fire, as it can explode and

cause injury. Dispose of it according to

local regulations.

Important Safety Instructions

Read all of the following instructions before operating your printer:

When choosing a place for the printer

❏Do not place the printer on an unstable surface.

❏Do not put your printer where the cord will be stepped on.

❏Slots and openings in the cabinet and the back or bottom are

provided for ventilation. Do not block or cover them. Do not put the

printer on a bed, sofa, rug, or other similar surface or in a built-in

installation unless proper ventilation is provided.

When choosing a power source

❏The interface connector for this printer, excluding the USB connector,

is Non-LPS (non-limited power source).

CAUTION

HOT SURFACE

Printed in xxxxx 03.xx-xx 4041286-00

xxx

❏Avoid using outlets that other appliances are plugged into.

❏Use the type of power source indicated on the label. If you are not

sure of the type of power available, consult your dealer or local

power company.

❏If you are unable to insert the plug into the outlet, contact a qualified

electrician.

❏If you use an extension cord, make sure that the total of the ampere

ratings on the products plugged into the extension cord does not

exceed the extension cord ampere rating.

❏Unplug this printer from the wall outlet and refer servicing to a

qualified service representative under the following conditions:

When using the printer

❏The printer weighs about 19.5 kg (43 lb). One person should not

attempt to lift or carry the printer. Two people should carry it.

❏Follow all warnings and instructions marked on the printer.

❏Unplug this printer from the wall outlet before cleaning.

❏Use a well-wrung cloth for cleaning and do not use liquid or aerosol

cleaners.

❏Avoid touching the components inside the printer unless instructed

to do so in the printer’s documentation.

❏Never force printer components into place. Although the printer is

designed to be sturdy, rough handling can damage it.

❏Be sure to keep consumables out of the reach of children.

❏Do not use this printer near water.

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into it.

C. If it has been exposed to rain or water.

D. If it does not operate normally when the operating instructions are followed.

Adjust only those controls that are covered by the operating instructions

since improper adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to restore the product

to normal operation.

E. If it has been dropped or the cabinet has been damaged.

F. If it exhibits a distinct change in performance, indicating a need for service.

❏Do not leave jammed paper inside of the printer. This can cause the

printer to overheat.

❏Never push objects of any kind through cabinet slots as they may

touch dangerous voltage points or short out parts that could result

in a risk of fire or electric shock.

❏Never spill liquid of any kind on the printer.

❏Except as specifically explained in the printer’s documentation, do

not attempt to service this product yourself. Opening or removing

those covers that are marked Do Not Remove may expose you to

dangerous voltage points or other risks. Refer all servicing in those

compartments to a qualified service representative.

❏Adjust only those controls that are covered by the operating

instructions. Improper adjustment of other controls may result in

damage and may require repair by a qualified service

representative.

Safety Information

Power cord

cCaution:

Be sure the AC power cord meets the relevant local safety standards.

Use only the power cord that comes with this product. Use of the another

cord may result in fire or electric shock.

This product’s power cord is for use with this product only. Use with other

equipment may result in fire or electric shock.

Laser safety labels

wWarning:

The performance of procedures and adjustments other than those

specified in the printer’s documentation may result in hazardous

radiation exposure.

Your printer is a Class 1 laser product as

defined in the IEC60825 specifications. The

label shown is attached to the back of the

printer in countries where required.

Internal laser radiation

This is a Class III b Laser Diode Assembly that has an invisible laser beam.

The printer head unit is NOT A SERVICE ITEM, therefore, the printer head unit

should not be opened under any circumstances. An additional laser

warning label is affixed to the inside of the printer.

Ozone safety

Ozone emission

Ozone gas is generated by laser printers as a by-product of the printing

process. Ozone is produced only when the printer is printing.

Ozone exposure limit

The recommended exposure limit for ozone is 0.1 parts per million (ppm)

expressed as an average time-weighted concentration over an eight (8)

hour period.

The EPSON laser printer generates less than 0.1 ppm for eight (8) hours of

continuous printing.

Minimize the risk

To minimize the risk of exposure to ozone, you should avoid the following

conditions:

❏Use of multiple laser printers in a confined area

❏Operation in conditions of extremely low humidity

❏Poor room ventilation

❏Long, continuous printing together with any of the above

Printer location

The printer should be located so that the exhaust gases and heat

generated are:

❏Not blown directly into the user’s face

❏Vented directly out of the building whenever possible

Max. Average Radiation Power: 5 mW at laser aperture

Wavelength: 770 to 800 nm

Other manuals for EPL-N2500

Table of contents

Other Epson Printer manuals

Epson

Epson WF-C5790 Series User manual

Epson

Epson L3100 Series User manual

Epson

Epson LQ-780 User manual

Epson

Epson WF-5191 Instruction Manual

Epson

Epson Stylus COLOR 460 Installation and operating instructions

Epson

Epson SureColor P600 Series User manual

Epson

Epson SC-S30600 User manual

Epson

Epson PictureMate Snap PM 240 User manual

Epson

Epson Stylus Photo PX830FWD Instruction Manual

Epson

Epson XP-430 User manual

Epson

Epson Stylus Color 670 User manual

Epson

Epson 4000 - Stylus Pro Color Inkjet Printer User manual

Epson

Epson SureColor P600 Series User manual

Epson

Epson FX-1050+ User manual

Epson

Epson EU-T400 Series User manual

Epson

Epson LQ-2090 User manual

Epson

Epson L3100 Series Instruction Manual

Epson

Epson XP-610 Small-in-One Instruction Manual

Epson

Epson TM-T83II-i User manual

Epson

Epson Stylus Office BX305F Assembly instructions

Epson

Epson SC-T2100 Series Manual

Epson

Epson Stylus Pro 7900 User manual

Epson

Epson Stylus pro 3800 portrait edition User manual

Epson

Epson Stylus Photo 810 User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide

IRA3D

IRA3D POETRY4 Original instructions

Ricoh

Ricoh Aficio AP400 operating instructions

BIXOLON

BIXOLON SRP-352plusV user manual