6 / 16
6. GENERAL PRINCIPLES
The users agree and accept to be in conformity with all requirements included in using manual, otherwise the machine shall be deemed
OUT OF GUARANTEE COVERAGE.
The user also accepts that he/she was fully informed about the limited guarantee liability.
Any living body or any object should not be placed on machines. In addition, any living body should not be put inside the machines.
It should not be allowed the children or any other unauthorized persons to operate the machines.
Any electrical operating machines should be cleaned after the required electrical connections switched off.
The electrical products should never be operated if any sufficient grounding installation had not been practiced in addition; the LEAK
CURRENT RELAY and fuse groups had not been installed in control box supplying the electrical energy to the machine.
The cover of any machine should not be opened during the period of working.
Use , foam free and foam controlled liquid detergent and polisher in your machine. While the device is working , do not open in any way
the cover of the device with cover.
Be careful not to squeeze your hands while closing the covers.
The machines and covers should not be treated as step or ladder in any case.
The electrical devices should never be washed in the manner of spraying water. They should be cleaned by means of rubbing after
switching the power off the power had been switched off.
Any scratchier or stripper tools should not be used during the cleaning.
This manual verifies all machines were tested and the required security controls were done in due diligence so delivered under operating
conditions.
Do not connect the devices, which are in connection with hose, to the waterlines in the temperatures below 5ºC and above 50ºC.
Use rubber gloves during the cleaning and maintenance practices procedures
Do not remove the labels and panels of the devices.
Do not spray machine with water.
In order to use efficiently and to decrease minimum the energy expenses, supply water in 50ºC to your devices with electrical heating
system. Additionally, in order to elongate the life of your device, use surely soft water in 15 ºF If you do not have the water in this
softness, use a water softening device.
Check th einlet pressure 200-400 kPA
Take care not to trap your hand when closing the door.
Manufacturer firm is not responsible for the printing errors, which take place in the instruction manual and device description catalogue,
coming together with the device.
Manufacturer has the right to make all changes, which he/she deems to be useful for user or him/her. However, he/she guarantees that
the features related to primary functionality and safety of the device will be maintained.
In case of any failure, cut the electrical and water connection of the device off and apply to the authorized services.
In your device, do not wash the things such as pots and pans, saucepans in different and big sizes, which do not fit to use purpose.
While the water in the boiler of your device is hot, do not insert your hand into the boiler. Water that is hot and contains detergent can
be harmful for your skin. In such a condition, rinse your hand with warm water.
Power cord must be min. H05RN-F type.
Cable diameter must be min 3x2.5 mm2
Grounding line must be continuously checked.
