D OPERATION
*Control Panel;
A: Water Inlet
B: Program Option
C: ON Lamp
D: Water Inlet Lamp
E: Washing Lamp
F: Ready Lamp
* Operating;
Change the water that is in water tank at least once in a day.
Before putting the dishes in to the appliance,make prewash with cold or warm water
without using any detergent.
Turn on the water source valve and plug in the appliance.
In order to take off any residue that remain in storage or pipes,operate the appliance
when it is empty.
Close the appliance’s outlet and turn the switch to the right and take ‘Water Inlet’ position
while it is ON position.
When the appliance is at ‘Water Inlet’ position,the water enter to the appliance’s
bowl,when water entrance completed,bowl resistance start to operate in order to heat the
water that is in bowl.After heating process ‘Ready Lamp’ signals.
Put enough detergent in to the storage.
Push the basket that you put dirty dishes to the inside and choose suitable washing
program.
Washing process; for hot water and washing with detergent (minimum 55°C) ,for rinsing
with hot water (minimum 75°C).
After washing process,the appliance will start rinsing process automatically.(Do not open
the lid before rinsing process ended ).
At the end of program open the lid and take off the washed basket.Place the other
prepared basket.Machine will do washing and rinsing processes at choosen program.
