EMMO E-mini B Quick start guide
www.emmo.ca
2
TABLE OF CONTENTS
Carton Contents -----------------------------------------------------------------------------------2
Note-------------------------------------------------------------------------------------------------3
Warning------------------------------------------------------------------------------------------------- 4
Assembly Instructions
Handlebar ------------------------------------------------------------------------------------------ 5
Front Wheel --------------------------------------------------------------------------------------- 6
Seat Post and Pedals------------------------------------------------------------------------------7
Operating Instructions
For E-mini B ----------------------------------------------------------------------------------- 8-9
For E-Wild B/ Monta B------------------------------------------------------------------------- 10
Battery & Charger Care-------------------------------------------------------------------------11
Safety----------------------------------------------------------------------------------------------12
General warning --------------------------------------------------------------------------------- 13
Meter Programming & Use
800 or 810 LED ----------------------------------------------------------------------------------14
S900 LCD-------------------------------------------------------------------------------------- 15-16
Troubleshooting---------------------------------------------------------------------------------17
Tips for basic maintenance of your electric bike -------------------------------------------18
Warranty information---------------------------------------------------------------------------19
The wiring diagram----------------------------------------------------------------------------- 21
RECORDING YOUR EMMO BIKE INFO -----------------------------------------------
21
CARTON CONTENTS
(x1) Kit Box
(x2) Pedals
(x1) Owner’s Manual
(x1) Tool Kit
(x1) Battery Charger
(x1) Reflector
(x1) EMMO Bike
(x1) Seat
(x1) Lithium Ion Battery
(x2) Keys
3
Thank you for choosing the EMMO electric bike. We believe this
technology, with the benefits of electric propulsion, provides you with
the perfect vehicle to increase your personal mobility.
Our brushless, electric hub motor allows you to run errands
or commute to work while saving money on gas and reducing the
environmental impact on our world. It also gives you the opportunity
to pedal if you want to get exercise along the way.
We believe you will enjoy your riders with EMMO.
If you have any concerns, questions or suggestions about the EMMO
electric bike, please contact us at www.emmo.ca. Again, thanks
for choosing EMMO.
PLEASENOTE:
THISMANUALISNOTINTENDEDASADETAILEDUSER,
SERVICE,REPAIRORMAINTENANCEMANUAL.PLEASE
SEEKASSISTANCEFROMAQUALIFIEDTECHNICIAN
FORSERVICE,REPAIRSORMAINTENANCE.
4
WARNING
Electric Bikes can be dangerous to use. The user or consumer assumes
all risk of personal injuries, damage, or failure of the bicycle or system and
all other losses or damages to themselves and others and to any property
arising as a result of using the bicycle.
As with all mechanical components, the bicycle is subjected to wear
and high stresses. Different materials and components may react to
wear or stress fatigue in different ways. If the design life of a component
has been exceeded, it may suddenly fail possibly causing injuries to the
rider. Any form of crack, scratches or change of coloring in highly stressed
areas indicate that the life of the component has been reached and it
should be replaced.
For replacement parts, technical information and warranty assistance,
please contact your EMMO dealer or visit www.emmo.ca.
YOURINSURANCEPOLICIESMAYNOTPROVIDE
COVERAGEFORACCIDENTSINVOLVINGTHEUSE
OFTHISBICYCLE.TODETERMINEIFCOVERAGE
ISPROVIDEDYOUSHOULDCONTACTYOUR
INSURANCECOMPANYORAGENT.
5
ASSEMBLYINSTRUCTIONS
ForHandlebar
Your bike has been pre-assembled and requires only a few simple steps
to get it ready for you to ride:
1. Carefully remove your bike from the carton and gently rest it in place with the
kickstand down.
2. Remove all of the inside cardboard protection and bubble wrap on the bike.
3. Please locate and set aside the kit box containing the battery charger, pedals, and
tool kit etc.
4. Place the handle bar on the stem, and tighten four bolts with 5mm Allen Key
(Figure 1), Position the handlebars to your desired comfort level.
5. Once the handlebars are aligned and the top bolt is slightly secured, firmly tighten
the 2 side bolts on the stem with 6mm allen key (Figure 3). After tightening the 2
side bolts, firmly tighten the top bolt with 5mm allen key (Figure 2). After all 3 bolts
have been securely fastened, make sure there is no looseness in the headset.
WARNING:
Do not over-tighten the stem bolt. Over tightening the stem bolt can damage
the steering system and cause loss of control.
Figure 1
Figure 2 Figure 3
6
ASSEMBLYINSTRUCTIONS
ForFrontWheel
CAUTION: Your Electric bike is equipped with a front disk brake. Be careful not to
damage the disk, caliper or brake pads when installing the front wheel. Never apply
the lever unless the disk is correctly inserted in the caliper.
Your bicycle may be equipped with a different securing method for the front wheel
(1) With the steering fork facing forward, insert the wheel between the fork blades so
that the axle sits firmly at the top of the fork dropouts. The cam lever should be on
rider’s left side of the bicycle (fig. 4-1)
(2) Make the front wheel axle sits completely in the slots of the fork dropouts, and at
the same time centering the wheel rim in the fork:
With a cam action system, move the cam lever upwards and swing it into the CLOSED
position (fig. 4-1). The lever should now be parallel to the fork blade and curved
toward the wheel. To apply enough clamping force, you will need to wrap your
fingers around the fork blade for leverage, and the lever should leave a clear imprint
in the palm of your hand.
NOTE:If,onatraditionalcamactionsystem,thelevercannotbepushedallthe
waytoapositionparalleltotheforkblade,returnthelevertotheOPEN
position.Thenturnthetensionadjustingnutcounterclockwisefor one
quarterturnandtrytighteningtheleveragain.
WARNING: Securely clamping the wheel with a cam action retention device takes
considerable force. If you can fully close the cam lever without wrapping your fingers
around the fork blade for leverage, the lever does not leave a clear imprint in the
palm of your hand, and the serrations on the wheel fastener do not emboss the
surfaces of the dropouts, the tension is insufficient. Open the lever; turn the tension
adjusting nut clockwise for a quarter turn; then try again.
Spin the wheel to make sure that it is centered in the frame and clears the brake pads;
then squeeze the brake lever and make sure that the brakes are operating properly.
(3) Hex nuts or hex key bolts which are threaded on to or into the hub axle. (bolt-on
wheel, fig. 4-4 )
7
ASSEMBLYINSTRUCTIONS
ForSeatPostandPedals
Pull the seat clamp handle away from the seat post and slide the seat up
or down to adjust the height. Move the clamp handle inward toward the
seat post so that the seat post can be held securely by the clamp. Make sure the seat is
clamped properly so that you can’t twist it out of alignment.
If necessary, tighten the clamp by twisting the clamp handle clockwise while in the
unclamped position. Then, fold the handle in toward the seat post. This should
require a fair amount of force to ensure the seat post is held tight. If necessary, the
clamp can be further tightened with a 5 mm allen wrench while in the clamped
position.
WARNING:Makesuretheseatisnotsetwiththeverticalmaximumheight
marksabovetheclamp.
Using the 15 mm wrench to attach and
tighten the pedals. PLEASE NOTE – The
pedals are marked “L” for Left and “R” for
Right. The left pedal is attached by turning it
counterclockwise and the right pedal is
tightened by turning it clockwise.
Make sure the pedals are properly
attached to the crank arms to prevent
stripping.
TORQUESPECIFICATIONS
8
OPERATINGINSTRUCTIONS
For E-mini B
To remove or insert the battery
Lift up the seat by loose the seat clamp (Figure 1) to create room to insert and
remove the battery. Turn the key to the "OFF" position, then press and turn the key
to "UNLOCK" position. Lift up the battery by the handle on the top of the battery
(Figure 2) and remove the battery. The key switch must be in the “UNLOCK” position
to slide the battery in and out.
Figure 1 Figure 2
Charging of battery
To charge the battery, plug the charger plug (Figure 4) into the charging port on the
battery (red arrow on Figure 3). Then plug the charger into an AC outlet. The LED
indicator on the charger should be red when the charger is charging the battery. Once
fully charged, the indicator will turn green. Please unplug the charge once it is fully
charged.
Figure 3 Figure 4
WARNING: DO NOT overcharge the battery. Please unplug the charger once the battery is fully charged.
9
OPERATINGINSTRUCTIONS
How to fold frame.
How to fold head stem vertically.
Lift the locking nut and pull down the lever. Once
unlocked, the handlebar stem can be folded down.
10
OPERATINGINSTRUCTIONS
For E-Wild B / Monta B
To remove or insert the battery
The battery is fully inserted in the battery holder, to remove the battery, turn the key
counterclockwise to unlock the battery (Figure 1), slide the battery up along the rail
(Figure 2) and remove the battery from the bike.
Charging of battery
To charge the battery, plug the charger plug into the charging port on the bike. Then
plug the charger into an AC outlet.
.
Figure 1 Figure 2
This manual suits for next models
2
Table of contents
Other EMMO Scooter manuals
