EML SB325 User manual

SB325/ HF-T100

ELECTRIC SHAVER WITH 360 DEGREE FLEXIBLE SHAVING HEAD

360° ROTARY SHAVER

INSTRUCTION MANUAL

This appliance can be used by children aged

from 8 years and above and by persons with

reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given supervision

or instruction concerning use of the appliance

in a safe way and understand the hazards

involved. Children shall not play with the

appliance. Cleaning and user maintenance

shall not be made by children unless they are

supervised.

Please read the user’s manual before using the product

and keep it for future reference.

English

ais

I. SAFETY INSTRUCTIONS

When using an electric shaver, basic safety precautions should always be followed, including the

following:

1. Use this shaver only for its intended household use as described in this manual.

2. Make sure that the supply voltage corresponds to the voltage marked on the instruction

manual in part II: Specifications.

3. Do not reach for an electric shaver in a charging operation that has fallen into water. Unplug

immediately.

4. Use the shaver only in dry conditions. Do not use the shaver while bathing or in a shower.

5. Do not place or store a shaver where it can fall or be pulled into a tub or sink. Do not place or

drop a shaver into water or other liquid.

6. Always unplug this shaver from the electrical outlet immediately after use, except when shaver

is (re)charging.

7. Do not use an adapter not recommended by the manufacturer. Only use with the adapter

supplied.

8. Never operate this shaver if it has a damaged adaptor, if it is not working properly, if it has

been dropped or damaged, or dropped into water while plugged in.

9. Keep the shaver and adaptor away from heated surfaces.

10. Never drop or insert any object into any opening.

11. Do not charge or plug in the shaver outdoors or operate where aerosol (spray)

products are used.

12. Do not charge or place the device in direct sunshine or near a heating system or wet

place. Otherwise, troubles may occur.

13. Make sure the USB charging cord and the adaptor does not get wet.

14. This marking indicates that the shaver head can be cleaned under running water.

II. SPECIFICATIONS

Battery : 1x Lithium battery 600mAh, 5V, 1A

Adaptor: Input: AC100-240V 50/60Hz 0.2A/ Output: DC5.0V 1000Ma

Shaver: DC5V, 1.0 A

III.DESCRIPTION

Fig.1

A. Protection cap

B. Button to lift up the click-on shaving head

unit

C. LED indicator charging light

D. ON/ OFF button

E. Socket for USB cord ( type C)

F. Cleaning brush (x1)

G. USB cable

H. Adaptor

IV. CHARGING YOUR SHAVER

For recharging, only use the detachable supply unit provided with this appliance.

Do not charge the device for more than 10 hours.

The shaver is delivered pre-charged, and is normally ready for use. However if it needs to be

recharged, proceed as indicated in the figures below:

There are 2 ways of recharging, as described and illustrated below:

1) AC charging

Before charging, make sure the power is off.

Connect the USB cord to the USB port of the

shaver and adapter. Then plug into mains to

recharge. Note: A click is heard when the USB

cord is well connected to the device.

2)USB Charging = Charge by computer or power

bank (It is recommended to use 5V 1A to charge

it.)

Connect the USB cord to the USB port of the

shaver and the computer USB interface. Note: A

click is heard when the USB cord is well connected

to the device.

Note: The LED light will be bright and flashing when

charging.

LOW BATTERY: The LED light will flash 3 times and the shaver will shut off. Recharge it.

V. TRAVEL LOCK

You can lock the shaver when you are going to travel. The travel lock prevents the shaver from being

switched on by accident.

Charging time before first

use:

90min

Charging time for next uses:

90min

Autonomy after full charge:

90min

Notes:

To optimize the lifetime of the rechargeable batteries, charge it

when the LED indicator flash 3 times and motor stop working.

Then fully recharge the battery.

Once the power cord is damaged. It must be replaced by the

manufacturer,after-service center or a similarly qualified

technician .

Activate

Deactivate

Press the on/off button for 3 seconds to

enter the travel lock mode, While you

activate the travel lock, the LED indicator

will flash for 3 times.

Press the on/off button for 3 seconds, the LED

indicator will flash for 3times.

The shaver is now ready for use again.

VI. HOW TO USE THE SHAVER

A. TURNING ON AND OFF YOUR SHAVER

NOTE: An adaptation period of 2 or 4 weeks may be necessary to allow the skin to get used to

the shaving system of our shaver, and thus to obtain optimal shaving efficiency.

The outer razor blade (dual foil) is thin and refined. When using, DO NOT touch your skin

too hard with the blade, nor drop the shaver. Your skin may be hurt or the outer blade will

be damaged.

VII. HOW TO REPLACE THE SHAVER HEAD?

For optimal shaving performance, replace the shaving heads every two years with original

ones provided by the manufacturer. The shaver can only be used and be functional with them.

Turn the shaving head

anticlockwise. Then lift

it up.

Remove the used

head.

Replace it with a

new one.

Close the shaving head. Turn the shaver head

clockwise till it is secured.

VII. CLEANING AND MAINTENANCE

Regular cleaning is recommended to guarantee optimal shaving performance.

DO NOT CLEAN THE SHAVER WHEN IT IS CHARGING.

MAKE SURE IT IS TURNED OFF AND REMOVE THE USB CORD IF IT IS CONNECTED

BEFORE CLEANING.

The shaver is washable and can be cleaned under the tap. DO NOT wash

the shaver with water hotter than 60℃.

Shaver head cleaning

1. Take off the shaver head.

TURN ON

TURN OFF

After cleaning the

shaver and

accessories, put the

cap again.

2. Press the release button to open the inner blade before washing the hair chamber and the

inner blade.

3. Use the brush to clean the shaver heads and hair chamber after use. If they are too dirty,

wash them with hot water(40-60℃).

Avoid damaging the shaving heads when cleaning.

Do not dry the shaving heads with the towel or tissue.

Please note that if there are too many beard crumbs stored in the shaver, their presence

may affect the quality of shaving, and the outer blade may not be sharp enough.

4. For efficient cleaning when needed, use a degreasing liquid (e.g.Alcohol) to clean shaving

heads. Then, lubricate the shaving heads with a drop of sewing machine oil after cleaning to

prevent wear of them.

IX. SAFE INSTRUCTIONS FOR BATTERY

ATTENTION :

Before dismantling the battery, you must be sure that turn off the power of appliance without

remaining electricity. If there is some, turn on the shaver until the motor stops.

The battery should not be removed until it is not completely discharged.

The battery must be removed from the appliance before it is scrapped.

The appliance must be disconnected from the mains supply when removing the battery. You

should unplug the charger and then remove the plug that connects to the shaver.

Do not plug the shaver after removing the battery.

The battery must be disposed of safely in the government designated collection places.

Procedure to remove the battery

Before starting any operation of the removal of the battery, please read the safety instructions written

above and follow them.

Press the button to lift up

the shaving head unit.

Remove it.

Lubricate with oil.

Close the shaving head.

Turn the shaver head

clockwise till it is secured.

Insert the end of

screwdriver in the

USB port.

Then pull the

bottom panel

off the

appliance.

Unscrew the 2

screws on the

inside of the

bottom panel.

Unscrew the

screw inside to

separate the

power unit from

the front panel.

Cut the wires

close to the

batteries and

then remove the

battery.

WARNING: You should not dispose of this device with your household waste. A selective

collection system for this type of product is implemented by your local authorities. Please

contact your local authorities to find out how and where collection takes place. These

restrictions apply because electrical and electronic devices contain dangerous substances that

have harmful effects on the environment or on human health and must be recycled.

This symbol indicates that electrical and electronic devices are collected selectively. The

symbol shows a waste container crossed out with an X symbol.

If the power cable is damaged, it must be replaced by the manufacturer, his after sales service,

or a person qualified in this area in order to avoid any accidents arising.

Imported by EML –trading name Prodis,1 rue de Rome, 93110 Rosny-sous-Bois, France/

Made in P.R.C

This manual suits for next models

Table of contents

Popular Electric Shaver manuals by other brands

Philips

Philips MicroAction 4402LC Specifications

Philips

Philips HQ7740 user guide

Philips

Philips Norelco BG2022 Bodygroom Specifications

Norelco

Norelco Quadra 7610X owner's manual

Philips

Philips 7616X manual

Philips

Philips HQ802 Specifications

Philips

Philips HQ7363/17 user manual

Braun

Braun WaterFlex WF2s manual

Philips

Philips NORELCO S7371 manual

Daga

Daga MT-400 Directions for use

Philips

Philips RQ119x manual

Remington

Remington BHT100 user manual

Philips

Philips Bodygroom BG2000 brochure

Kompernass

Kompernass KH 5537 operating instructions

Remington

Remington BHT6100 manual

Philips

Philips qc5365 user manual

MIA

MIA Aqua Body manual

Philips

Philips NORELCO AT880 user manual