Emerson Micro Motion 3500 User manual

Installation Manual

20000885, Rev BA

February 2015

Micro Motion®Model 3500 Transmitter

(MVD) or Model 3300 Controller

Installation manual for panel mount

Safety and approval information

This Micro Motion product complies with all applicable European directives when properly installed in accordance with the

instructions in this manual. Refer to the EC declaration of conformity for directives that apply to this product. The EC declaration of

conformity, with all applicable European directives, and the complete ATEX Installation Drawings and Instructions are available on

the internet at www.micromotion.com or through your local Micro Motion support center.

Information affixed to equipment that complies with the Pressure Equipment Directive can be found on the internet at

www.micromotion.com/documentation.

For hazardous installations in Europe, refer to standard EN 60079-14 if national standards do not apply.

Other information

Full product specifications can be found in the product data sheet. Troubleshooting information can be found in the transmitter

configuration manual. Product data sheets and manuals are available from the Micro Motion web site at www.micromotion.com/

documentation.

Return policy

Micro Motion procedures must be followed when returning equipment. These procedures ensure legal compliance with government

transportation agencies and help provide a safe working environment for Micro Motion employees. Failure to follow Micro Motion

procedures will result in your equipment being refused delivery.

Information on return procedures and forms are available on our web support system at www.micromotion.com, or by phoning the

Micro Motion Customer Service department.

Micro Motion customer service

Email:

•Worldwide: flow.support@emerson.com

•Asia-Pacific: [email protected]

Telephone:

North and South America Europe and Middle East Asia Pacific

United States 800-522-6277 U.K. 0870 240 1978 Australia 800 158 727

Canada +1 303-527-5200 The Netherlands +31 (0) 704 136 666 New Zealand 099 128 804

Mexico +41 (0) 41 7686 111 France 0800917901 India 800 440 1468

Argentina +54 11 4837 7000 Germany 0800 182 5347 Pakistan 888 550 2682

Brazil +55 15 3413 8000 Italy 8008 77334 China +86 21 2892 9000

Venezuela +58 26 1731 3446 Central & Eastern +41 (0) 41 7686 111 Japan +81 3 5769 6803

Russia/CIS +7 495 981 9811 South Korea +82 2 3438 4600

Egypt 0800 000 0015 Singapore +65 6 777 8211

Oman 800 70101 Thailand 001 800 441 6426

Qatar 431 0044 Malaysia 800 814 008

Kuwait 663 299 01

South Africa 800 991 390

Saudia Arabia 800 844 9564

UAE 800 0444 0684

Installation Manual 3

Contents

Chapter 1 Planning....................................................................................................................... 5

1.1 Installation kit ........................................................................................................................ 5

1.2 Choose a location................................................................................................................... 6

1.3 Cable lengths ......................................................................................................................... 8

1.4 Install the Model 3300 or Model 3500 in the panel................................................................. 9

Chapter 2 Mounting..................................................................................................................... 11

2.1 Mount the core processor ...................................................................................................... 11

Chapter 3 Wiring ......................................................................................................................... 13

3.1 Connect the input and output wiring ..................................................................................... 13

3.2 Connect the Model 3500 to the sensor .................................................................................. 16

3.3 Wire the sensor to the remote core processor........................................................................ 24

3.4 Connect the power supply wiring........................................................................................... 25

4Model 3500 Transmitters or Model 3300 Peripherals - Panel Mount

Installation Manual 5

Planning

1 Planning

This installation manual explains basic installation guidelines for installing the Micro Motion

Model 3300 or Model 3500 MVD applications platform.

For information on I.S. applications, refer to Micro Motion approval documentation.

For complete instructions about configuration, maintenance, and service, refer to the

instruction manual shipped with the transmitter.

1.1 Installation kit

The installation kit includes a bezel, frame, two mounting brackets with screws, a power

supply wiring connector, and a retaining clip assembly for power supply wiring. See Figure

1-1).

The applications platform fits through a 5 7/16-inch (138 mm) square cutout in a panel

that is 5/64 inch (2 mm) to 1/2 inch (13 mm) thick. The bezel provides a IP65 watertight

seal between the panel cutout and the applications platform housing. See Figure 1-1.

In addition, the installation kit includes either:

•A bracketed wiring connector for screw-type connectors. See Figure 3-2.

•I/O cables and connectors. See Figure 3-3.

WARNING!

Improper installation in a hazardous area can cause an explosion.

For information about hazardous applications, refer to the appropriate Micro Motion approval

documentation, shipped with the meter or available from the Micro Motion web site.

WARNING!

Hazardous voltage can cause severe injury or death.

Install transmitter and complete all wiring before supplying power.

CAUTION!

Improper installation can cause measurement error or meter failure. Follow all instructions.

6Model 3500 Transmitters or Model 3300 Peripherals - Panel Mount

Planning

Figure 1-1: Panel-mount installation kit

1.2 Choose a location

Choose a location for the transmitter based on the requirements described below.

1.2.1 Environmental requirements

Install the Model 3300 or Model 3500 where the ambient temperature is between –4 to

+140 °F (–20 to +60 °C).

1.2.2 Dimensions

See Figure 3-1 and Figure 3-3 for illustrations of screw-type connectors versus I/O cables.

Model type Dimension drawing

Screw-type wiring connectors Figure 1-2

I/O cables Figure 1-3

Power supply wiring connector

Retaining-clip assembly for power supply

wiring

2 x mounting bracket with screw

Frame Bezel

Panel thickness:

5/64 inch (2 mm) minimum

1/2 inch (13 mm) maximum

Installation Manual 7

Planning

Figure 1-2: Panel-mount screw-type dimensions

Figure 1-3: Panel-mount dimensions with I/O cables

4 1/2

(114)

6 1/2

(165)

Bezel

Panel

(152)

Approvals tag

Frame

Intrinsic safety shield

(Model 3500 only)

7 3/4

(197)

1/2

(12)

8 1/2

(216)

(152)

inches

(mm)

6 11/16

(170)

6 1/2

(165)

Bezel

Panel

(152)

6 11/16

(170)

Minimum 4 1/4"

(108 mm) bend radius

Approvals tag

1/2

(12)

8 3/4

(222)

5 5/16

(135)

Frame

(152)

inches

(mm)

8Model 3500 Transmitters or Model 3300 Peripherals - Panel Mount

Planning

1.3 Cable lengths

Maximum cable length from the sensor to the Model 3500 transmitter depends on the

installation type and cable type.

If you are installing the Model 3300 applications peripheral in combination with a

transmitter, the maximum cable length between the transmitter frequency output and the

Model 3300 frequency input is 500 feet (150 meters).

Figure 1-4: 4-wire remote transmitter

Figure 1-5: Remote core processor with remote transmitter

Installation type Maximum cable length

4-wire remote transmitter See Figure 1-4, and Table 1-1 for maximum length of the

4-wire cable

Remote core processor with remote

transmitter See Figure 1-5, and Table 1-1 for maximum length of the

4-wire cable and the 9-wire cable

Model 3500

4-wire cable

Sensor

Core processor

(standard or enhanced)

Sensor

Junction box

9-wire cable

4-wire cable

Model 3500

Core processor

(standard only)

Installation Manual 9

Planning

1.4 Install the Model 3300 or Model 3500 in the

panel

Refer to Figure 1-6 and follow these steps:

1. Insert the Model 3300 or Model 3500 through the cutout.

2. Slide the frame over the housing.

3. Insert the posts on the brackets into the rails on the housing.

4. Tighten the screws evenly to 10 to 14 inch-pounds (1,13 to 1,38 Nm) to ensure a

watertight seal between the gasket and the panel.

Figure 1-6: Panel installation steps

Table 1-1: Maximum cable lengths between sensor and transmitter

Cable type Wire gauge Maximum length

Micro Motion 4-wire Not applicable •1000 ft (300 m) without

Ex-approval

•500 ft (150 m) with

IIC-rated sensors

•1000 ft (300 m) with

IIB-rated sensors

Micro Motion 9-wire Not applicable 60 ft (20 m)

User-supplied 4-wire VDC 22 AWG (0.35 mm2) 300 ft (90 m)

VDC 20 AWG (0.5 mm2) 500 ft (150 m)

VDC 18 AWG (0.8 mm2) 1000 ft (300 m)

RS-485 22 AWG (0.35 mm2) or

larger 1000 ft (300 m)

Step 1

Step 2

Step 3 Step 4

10 Model 3500 Transmitters or Model 3300 Peripherals - Panel Mount

Planning

Other manuals for Micro Motion 3500

This manual suits for next models

Table of contents

Other Emerson Transmitter manuals

Emerson

Emerson Rosemount 5408 User manual

Emerson

Emerson Rosemount 550PT User manual

Emerson

Emerson Rosemount 1066 User manual

Emerson

Emerson Rosemount 8732EM User manual

Emerson

Emerson Rosemount 3051 Series User manual

Emerson

Emerson Rosemount 3051 User manual

Emerson

Emerson Rosemount 2051G User manual

Emerson

Emerson Rosemount Analytical HART SMART 5081C-HT User manual

Emerson

Emerson Rosemount 3051P User manual

Emerson

Emerson Rosemount 3051HT User manual

Emerson

Emerson Rosemount 248 User manual

Emerson

Emerson Rosemount 708 User manual

Emerson

Emerson Rosemount 3051 User manual

Emerson

Emerson Rosemount 3051 CF Series User manual

Emerson

Emerson Rosemount 148 User manual

Emerson

Emerson Rosemount 3408 User manual

Emerson

Emerson Rosemount 248 User manual

Emerson

Emerson Rosemount 3144P User manual

Emerson

Emerson Rosemount 56 User manual

Emerson

Emerson Rosemount 248 User manual

Emerson

Emerson wirelessHART Rosemount Series User manual

Emerson

Emerson Rosemount 5600 Series User manual

Emerson

Emerson Rosemount5081 User manual

Emerson

Emerson Rosemount 3152 User manual

Popular Transmitter manuals by other brands

NIVELCO

NIVELCO EasyTREK SCA-300 Series Programming manual

Honeywell

Honeywell 5816WMBR installation instructions

Kamstrup

Kamstrup READy MTU Installation and operation guide

Omega

Omega ZW Series user guide

ABB

ABB Field 264H Instructions for installation

Alinco

Alinco DJ-V17T Service manual

Dejero

Dejero EnGo 3x manual

Rosemount

Rosemount 4600 Reference manual

Speaka Professional

Speaka Professional 2342740 operating instructions

trubomat

trubomat GAB 1000 instruction manual

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 instructions

Rondish

Rondish UT-11 quick start guide

MG 10JRE instruction manual

Burkert

Burkert 8177 operating instructions

Firetide

Firetide HotPort 3203 Hardware installation guide

Tele Radio

Tele Radio T9-02 User instructions

Rotronic

Rotronic HygroFlex HF3 Series user guide

Jamara

Jamara FCX6 Pro Tel Instruction