Elmo TT-12i Service manual
Figure 1
Figure 2
Figure 3
Technical Bulletin
Subject: Changing USB Mode Setting to “UVC”
Model: TT-12i & TT-12iD
The TT-12i and TT-12iD must have the USB Mode Setting set to “UVC” to
be recognized natively by a computer Operating System. During this
process ensure the USB cable is NOT connected to the camera as it may
cause the setting change to fail.
1. Connect the document camera to a display (e.g. monitor, TV,
projector, etc.) using the HDMI or RGB output. The on screen menu
is not available when using the USB or composite video connections.
2. Press the Menu button the camera base to activate the on screen
menu.
3. Using the button on the base (Figure 1) navigate to the Preferences
Icon (Figure 2)
4. Navigate to the USB Mode sub-menu (Figure 3) and press select to
enter the menu.
5. Select UVC from the menu.
6. Return to the home menu and navigate to the Exit icon in the bottom
right corner of the menu screen.
7. Power down the document camera.
8. Connect the USB cable and power on the camera.
This manual suits for next models
1
Table of contents
Other Elmo Document Camera manuals
Elmo
Elmo TT-02S User manual
Elmo
Elmo Document Camera P30S User manual
Elmo
Elmo P30 User manual
Elmo
Elmo EV-500AF User manual
Elmo
Elmo Visual Presenter HV-7100SX User manual
Elmo
Elmo TX-1 User manual
Elmo
Elmo Visual Presenter EV-200 User manual
Elmo
Elmo P10S User manual
Elmo
Elmo TT-02U User manual
Elmo
Elmo TT-02 User manual
Elmo
Elmo HV-8500SX User manual
Elmo
Elmo TT-12 User manual
Elmo
Elmo TT-02S User manual
Elmo
Elmo Visual Presenter HV-7100SX User manual
Elmo
Elmo EV 4400 AF User manual
Elmo
Elmo Teacher's Choice P10 User manual
Elmo
Elmo P30 User manual
Elmo
Elmo MX-P User manual
Elmo
Elmo L-1EX User manual
Elmo
Elmo MA-1 User manual
