Electrolux EW1232I User manual

EW 1232 I

132 995 030

LAVADORA

WASHING MACHINE

MÁQUINA DE LAVAR ROUPA

PLUNTHRIO ROUCWN

ÇAMAÇIR MAKINESI

MANUAL DE USO

INSTRUCTION BOOKLET

MANUAL DE UTILIZAÇÃO

ODHGIES GIA THN

EGKATASTASH KAI TH CRHSH

KULLANIM KILAVUZU

132995030•e-gb.qxd 18-06-2002 9:41 Pagina 1

ENGLISH

Dear customer,

Please read these operating instructions carefully

and pay particular attention to the safety notes

indicated in the first pages. We recommend that you

keep this instruction booklet for future reference and

pass it on to any future owners.

Transport damages

When unpacking the appliance, check that it is not

damaged. If in doubt, do not use it and contact the

Service Centre.

The symbols you will see on some paragraphs of this booklet have the following meaning:

The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly

important for your safety or correct functioning of the appliance.

The information marked with this symbol provides additional instructions and practical tips on the use of

the appliance.

Tips and information about economical and ecological use of the machine are marked with this symbol.

Our contribution to the protection of the

environment: we use recycled paper.

132995030•e-gb.qxd 18-06-2002 9:42 Pagina 27

Contents

Maintenance 48

Bodywork 48

Door seal 48

Detergent dispenser drawer 48

Drain filter 48

Water inlet filter 48

Emergency emptying out 49

Frost precautions 49

Something not working? 50-51

Warnings 29-30

Disposal 30

Tips for environmental protection 30

Technical specifications 31

Installation 32

Unpacking 32

Positioning 32

Water inlet 33

Water drainage 33

Electrical connection 33

Building-in 34

Preparation and assembly of the door 34-35

Your new washing machine 36

Description of the appliance 36

Detergent dispenser drawer

and programme chart 36

Use 37

Control panel 37

Controls 37-40

Washing hints 41

Sorting the laundry 41

Temperatures 41

Before loading the laundry 41

Maximum loads 41

Laundry weights 41

Removing stains 41

Detergents and additives 42

Quantity of detergent to be used 42

International wash code symbols 43

Operating sequence 44-45

Washing programmes 46

Special programmes 47

132995030•e-gb.qxd 18-06-2002 9:42 Pagina 28

ENGLISH

Warnings

Installation

•All internal packing must be removed before using

the appliance. Serious damage may be caused to

the machine or adjacent furniture if the protective

transit devices are not removed or are not

completely removed. Refer to the relevant

paragraph in the instruction book.

•Any electrical work required to install this appliance

must be carried out by a qualified electrician.

•Any plumbing work required to install this

appliance must be carried out by a qualified

plumber.

•After having installed the machine, check that it is

not standing on its electrical supply cable.

•If the appliance is placed on a carpeted floor,

ensure that air can circulate freely between the feet

and the floor.

Use

•This appliance is designed for domestic use. It

must not be used for purposes other than those for

which it was designed.

•Only wash fabrics which are designed to be

machine washed. Follow the instructions on each

garment label.

•Do not overload the appliance. Follow the

instructions in the instruction book.

•Make sure that all pockets are empty. Objects such

as coins, safety pins, pins and screws can cause

extensive damage.

•Do not machine wash garments saturated with

petroleum, methylated spirits, trichlorethylene, etc.

If such fluids have been used to remove stains

prior to washing, wait until they have completely

evaporated from the fabric before placing garments

in the appliance.

•Place small items such as socks, belts, etc. in a

cloth bag or pillowcase to prevent them getting

trapped between the drum and the tub.

•Use only the recommended quantities of fabric

softener. An excessive amount could damage the

laundry.

•Leave the porthole door slightly ajar when the

appliance is not in use. This preserves the door

seal and prevents the formation of musty smells.

•Always check that water has emptied out before

opening the door. If not, drain the water following

the instructions in the instruction book.

•Always unplug the appliance and shut the water

tap after use.

General safety

•Repairs to the machine must be carried out only by

qualified personnel. Repairs carried out by

inexperienced persons could cause serious

danger. Contact your local Service Centre.

•Never pull the power supply cable to remove the

plug from the socket; always take hold of the plug

itself.

•During high temperature wash programmes the

door glass may get hot. Do not touch it!

The following warnings are provided in the interests of overall safety. You must read them carefully before

installing or using the appliance.

132995030•e-gb.qxd 18-06-2002 9:42 Pagina 29

Disposal

Tips for environmental protection

Packaging materials

The materials marked with the symbol are

recyclable.

>PE<=polyethylene

>PS<=polystyrene

>PP<=polypropylene

This means that they can be recycled by disposing of

them properly in appropriate collection containers.

Machine

Use authorised disposal sites for your old appliance.

Help to keep your country tidy!

To save water, energy and to help protect the

environment, we recommend that you follow these

tips:

•Normally soiled laundry may be washed without

prewashing in order to save detergent, water and

time (the environment is protected too!).

•The machine works more economically if it is fully

loaded.

•With adequate pre-treatment, stains and limited

soiling can be removed; the laundry can then be

washed at a lower temperature, so saving energy.

•Measure out detergent according to the water

hardness, the degree of soiling and the quantity of

laundry being washed.

Child safety

•Children are often not aware of how dangerous

electrical appliances can be. When the machine is

working, children should be carefully supervised

and not be allowed to play with the appliance.

•The packaging components (e.g. plastic film,

polystyrene) can be dangerous to children - danger

of suffocation! Keep them out of children’s reach.

•Keep all detergents in a safe place out of children’s

reach.

•Make sure that children or pets do not climb into

the drum.

•When the appliance is to be scrapped, cut off the

electrical supply cable and destroy the plug with

the remaining cable. Disable the door catch in

order to prevent children from becoming trapped

inside while playing.

132995030•e-gb.qxd 18-06-2002 9:42 Pagina 30

ENGLISH

Technical specifications

DIMENSIONS Height 82 cm

Width 60 cm

Depth 54 cm

MAXIMUM LOAD Cotton 5 kg

Synthetics 2 kg

Delicates 2 kg

Woollens 1 kg

SPIN SPEED 1200 rpm max.

POWER SUPPLY VOLTAGE/FREQUENCY 220-230 V/50 Hz

TOTAL POWER ABSORBED 2200 W

MINIMUM FUSE PROTECTION 10 A

WATER PRESSURE Minimum 50 kPa

Maximum 800 kPa

This appliance complies with the following EEC Directives:

73/23/EEC of 19/02/73 relating to low voltage

89/336/EEC of 03/05/89 relating to electromagnetic compatibility.

132995030•e-gb.qxd 18-06-2002 9:42 Pagina 31

Installation

Unpacking

All transit bolts and packing must be removed

before using the appliance.

You are advised to keep all transit devices so that

they can be refitted if the machine ever has to be

transported again.

1. Using a spanner, unscrew and remove the rear

right-hand bolt and lay the machine on its back,

taking care not to squash the hoses. This can be

avoided by placing one of the corner packing

pieces between the machine and the floor.

2. Remove the polystyrene base and take off the

bottom panel by unscrewing the central screw.

3. Carefully remove the right-hand bag.

4. Carefully slide out the other bags.

5. Re-fit the bottom panel using the 4 screws

supplied with the door hinges (in the plastic bag)

and the previously removed screw.

P0453

P0016

P0015

P0457

P0255

6. Set the machine upright and remove the two

remaining bolts from the back.

7. Pull out the three plastic spacers from the holes

into which the bolts were fitted.

8. Plug all the holes with the plugs which you will

find in the plastic envelope containing the

instruction booklet.

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is

not impeded by carpets, rugs etc. Check that the

machine does not touch the wall or other kitchen

units.

Carefully level by screwing the adjustable feet in or

out. Never place cardboard, wood or similar

materials under the machine to compensate for any

unevenness in the floor.

P1051

P0020

P0256

132995030•e-gb.qxd 18-06-2002 9:42 Pagina 32

ENGLISH

Water inlet

Connect the water inlet hose supplied with the

machine to a tap with a 3/4" thread. Do not use

already employed hoses.

The other end of the inlet hose which connects to the

machine can be turned in any direction. Simply

loosen the fitting, rotate the hose and retighten the

fitting, making sure there are no water leaks.

The inlet hose must not be lengthened. If it is too

short and you do not wish to move the tap, you will

have to purchase a new, longer hose specially

designed for this type of use.

Water drainage

The end of the drain hose can be positioned in three

ways:

Hooked over the edge of a sink using the plastic

hose guide supplied with the machine. In this

case, make sure the end cannot come unhooked

when the machine is emptying.

This could be done by tying it to the tap with a piece

of string or attaching it to the wall.

In a sink drain pipe branch. This branch must be

above the trap so that the bend is at least 60 cm

above the ground.

Directly into a drain pipe at a height of not less

than 60 cm and not more than 90 cm.

The end of the drain hose must always be

ventilated, i.e. the inside diameter of the drain pipe

must be larger than the outside diameter of the drain

hose.

P0022

P0021

P1088

The drain hose must not be kinked. Run it along the

floor; only the part near the drainage point must be

raised.

Electrical connection

This machine is designed to operate on a 220-230 V,

single-phase, 50 Hz supply.

Check that your domestic electrical installation can

take the maximum load required (2.2 kW), also

taking into account any other appliances in use.

Connect the machine to an earthed socket.

The manufacturer declines any responsibility

for damage or injury through failure to comply

with the above safety precaution.

Should the appliance power supply cable

need to be replaced, this should be carried

out by our Service Centre.

P0023

132995030•e-gb.qxd 18-06-2002 9:42 Pagina 33

Building-in

This appliance has been designed to be built into the

kitchen furniture.

The recess should have the dimensions shown in

picture A.

Preparation and assembly of the door

The machine is originally pre-arranged for the

assembly of a door opening from right to left.

In this case it is sufficient to screw in the hinges (1)

and the counter-magnet (6) provided with the

appliance, at the right level (Fig. B).

a) Door

The dimensions of the door should be:

- width 595-598 mm

- thickness 16-22 mm

The height (C-Fig. C) depends on the height of the

adjacent furniture's base.

P0982

P0965

820 min

600

min.

600

596

416 176,5

818

541

195

490

160

120

515

165

b) Hinges

To mount the hinges it is necessary to drill two holes

(dia. 35 mm, depth 14 mm) on the inner side of the

door. The distance between the holes must be

416 mm.

The distance (B) from upper edge of the door to the

centre of the hole depends on the adjacent

furniture's dimensions.

The required dimensions are given in the picture C.

The hinges will be fixed to the door by means of

screws for wood (2-Fig. B).

c) Mounting the door

Fix the hinges to the machine by means of the M5x8

screws (3-Fig. B). The hinges can be adjusted to

compensate for possible uneven thickness of the

door.

To align the door perfectly it is necessary to loosen

the screw (3-Fig. B), adjust the door and tighten the

screw again.

Ø 35 mm - Depth 14 mm

16-22

22+1,5

595-598

416

P0026 C

132995030•e-gb.qxd 18-06-2002 9:42 Pagina 34

ENGLISH

d) Counter-magnet (6)

The appliance is pre-arranged for a magnetic closure

of the door. To enable a correct operation of this

device, it is necessary to screw the counter-magnet

(6) (steel disk + rubber ring) into the inner side of the

door.

Its position must correspond to the magnet (4) on the

appliance (see picture D).

If the door has to be opened from left to right, invert

the position of the plates (5 and 7) and the magnet

(4) (Fig. B and E). Mount the countermagnet (6) and

the hinges (1) as previously described.

When the appliance is installed the power supply

cable must be easily accessible.

P0983

P0984

6

4

132995030•e-gb.qxd 18-06-2002 9:42 Pagina 35

Table of contents

Other Electrolux Washer manuals

Electrolux

Electrolux EW6F4842AB User manual

Electrolux

Electrolux AQUALUX EW1006 F Quick guide

Electrolux

Electrolux EWS 126410 W User manual

Electrolux

Electrolux EWF9024D3WB User manual

Electrolux

Electrolux EW6F5943FB User manual

Electrolux

Electrolux EW6F4143FB User manual

Electrolux

Electrolux EIFLS55IIW - 27" Front-Load Steam Washer Installation instructions

Electrolux

Electrolux EWS1277FDW User manual

Electrolux

Electrolux EWM1000 User manual

Electrolux

Electrolux EW6S347SI User manual

Electrolux

Electrolux EWG 147540 W User manual

Electrolux

Electrolux EWB 76210 W User manual

Electrolux

Electrolux STAR-EFLS210TIW User manual

Electrolux

Electrolux EW514S User manual

Electrolux

Electrolux AQUALUX 1000 EW 1006 F Quick guide

Electrolux

Electrolux ZWF1211W User manual

Electrolux

Electrolux EW 800 F Quick guide

Electrolux

Electrolux LAVAMAT 61271 BI User manual

Electrolux

Electrolux EW557F User manual

Electrolux

Electrolux WASL 3T201 User manual

Electrolux

Electrolux EW2F4822BF User manual

Electrolux

Electrolux EWL 105410 W User manual

Electrolux

Electrolux EWF 1084BMW User manual

Electrolux

Electrolux EWF14742 User manual

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide

Beko

Beko WKB 51231 PTMA manual