Electrolux KITE" Bar graph Variant User manual
SERVICE MANUAL
© Electrolux Distriparts
Muggenhofer Straße 135
D-90429 Nürnberg
Germany
Fax +49 (0)911 323 1022
DGS-TDS-N
Publ.-Nr.:
599 531 461
685
12.07
EN
Edition:
Hobs
with
„KITE“
Input electronic
- 2 -
DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN
Table of contents
1. ESD=electrostatic discharge ......................................................................................3
2. Software specifications, functions ..............................................................................4
2.1 Appliance variants...................................................................................................... 4
2.2 Button / and display layouts ....................................................................................... 5
2.2.1 „KITE“ Bar graph Variante.........................................................................................5
2.2.2 „KITE“ 7 Segment Variant .........................................................................................6
2.3 Main features of operation .........................................................................................7
2.3.1 Appliance On and Off connection ..............................................................................7
2.3.2 Child safety function................................................................................................... 7
3. Automatic Shut-Off.....................................................................................................8
4. Functional parts, Component data .............................................................................9
4.1 „KITE“ Input electronic ...............................................................................................9
4.2 „HOC 2010“ power electronics for radiation-heated hobs........................................11
5. Fault diagnosis .........................................................................................................12
5.1 What to do if ...? .......................................................................................................12
5.2 Alarmmanagement (Faultcodes)..............................................................................13
5.2.1 Error codes for hobs with radiation-heated cooking zones ...................................... 13
5.2.2 Error codes with hobs with induction heating........................................................... 13
6. Demo Mode/ Service Mode/ Alarm Error Mode .......................................................13
- 3 -
DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN
1. ESD=electrostatic discharge
As the single electronic interfaces are not protected internally against statical electricity and are
partially open, you must pay attention to that, in case of a repair, there will be a potential
compensation via the housing of the appliance (touch it) in order to neutralize a possible
charging and to prevent a damaging of the affected electronic interface.
You also have to be careful with those electronics delivered as spare parts, which have to be put
out of the ESD protective package only after a potential compensation (discharge of possible
statical electricity).
If a potential compensation with an existing static electricity is not executed, it does not mean
that the electronic is demaged directly. Consequential damages may result due to the damaging
of internal structures which arise only in case of load through temperature and current.
Endangered are all assembly groups which are provided with control entries, wire paths lying
open and free-accessible processors.
- 4 -
DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN
2. Software specifications, functions
2.1 Appliance variants
„KITE“ Bar graph Variant „KITE“ 7 Segment Variant
Sample Illustration Sample Illustration
- 5 -
DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN
6 2 7 8 9 7 2
1 2 7 3 4 5 7 2
Sample Illustration
2.2 Button / and display layouts
2.2.1 „KITE“ Bar graph Variante
1 Locking/child safety lock with display
2 Additional multizone or additional connection of special functions with LED, depending on
appliance class/make
3 Light elements for the cooking stage display
4 Cooking zone displays (LED) timer function
5 Timer display, 2x 7 segment displays
6 On/Off with display
7 Cooking zones status displays (LED) depending on appliance class/make
- Pot recognition
- Automatic deactivation
- Residual heat ...
8 Timer operation
9 Cooking stage selection
- 6 -
DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN
6 2 7 8 7 2
1 2 7 3 4 5 7 2
Sample Illustration
2.2.2 „KITE“ 7 Segment Variant
1 Locking/child safety lock with display
2 Additional multizone or additional connection of special functions with LED, depending on
appliance class/make
3 Cooking stage selection
4 Cooking zone displays (LED) timer function
5 Timer display, 2x 7 segment displays
6 On/Off with display
7 Cooking zones status displays (LED) depending on appliance class/make
8 Timer operation
- 7 -
DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN
2.3 Main features of operation
2.3.1 Appliance On and Off connection
Switch on: -Touch "ON" sensor panel for 1 second. Pilot light illuminates.
Switch off: -Touch "OFF" sensor panel for 1 second. Pilot light illuminates.
After activation, a cooking stage or a function must be set within 10 seconds or the appliance
switches off automatically.
2.3.2 Child safety function
The child safety lock prevents an undesirable use of the appliance.
Switching child safety function on
- Switch appliance on with the `ON´ safety switch (do not set a cooking stage).
- Press the child safety lock button for 4 seconds. Display "L". The child safety device is
activated.
Bypassing the child safety lock
With this, the child safety lock can be deactivated for a single cooking process; it continues to
remain active afterwards.
- Switch appliance on with the `ON´ safety switch (do not set a cooking stage).
- Press the child safety lock button for 4 seconds. Display "L".
It can be used one more time until the next deactivation of the appliance. After the child safety
device has been bypassed a cooking stage or function must be set within approx. 10 seconds,
otherwise the appliance switches off automatically.
Switching child safety function off
- Activate the appliance with the "ON" sensor button.
- Press the child safety lock button for 4 seconds. Display "L".
- Appliance switch off. The childproof lock is deactivated.
- 8 -
DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN
3. Automatic Shut-Off
Hob
- If you do not set a cooking level in a cook zone within approx. 10 seconds after switching
on of the cook field, the cook field switches off automatically.
- If one or more sensor fields are covered longer than 10 seconds, e.g. by a pot placed on
it, a signal sounds and the cook field switches off automatically.
- If all cook zones are switched off, the cook field switches off automatically approximately
10 seconds later.
Control panel
- If one or more sensor panels in the operating panel should be covered for more than 10
second when the appliance is switched off, a buzzer sounds. The buzzer switches itself off
automatically when the sensor panels are no longer covered.
Cooking zones
- If one of the cook zones is not switched off after a certain time or if the cook stage is not
changed, the appropriate cook zone switches off automatically. „- “is displayed. Before
renewed use the cook zone must be set to „0 “and be cooled down.
cooking level The cooking zones are disconnected with
1-3 6 Hours
4-6 5 Hours
7-8 4 Hours
9-14 1,5 Hours
- 9 -
DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN
4. Functional parts, Component data
4.1 „KITE“ Input electronic
Depending on the "KITE" type, "KITE" input electronic mainly comprises one or more LED
displays, 4 "sliders" (touch control operating strips), capacitive sensor buttons and a
microprocessor in addition to diverse semiconductor modules.
"KITE" controls both radiation-heated hobs with HOC power electronic and hobs with induction
heating.
Fig.: „KITE“ Bar graph Variante
- 10 -
DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN
Sample Illustration Induction hob
With radiation-heated hobs, the HOC power electronics can be accessed after the silicone
frame has been removed. Please refer to Service Manual 599 519 523 for further information on
the servicing of induction hobs.
Assembly situation „KITE“ input electronic
The `KITE´ input electronics system can be accessed after the top glass/top trough frame
connecting screws have been loosened and the top glass has been lifted off; it can now be
easily removed together with the silicone sealing mat. This is valid for both radiation-heated
hobs and hobs with induction heating.
The silicone sealing mat is enclosed with the configured `KITE´ input electronics spare part. It is
imperative that this also be replaced and carefully fitted in order to ensure the tightness of the
electronics. The `KITE´ input electronics must be exactly fitted in the mat. Check that the cable
sleeve is correctly positioned before closing the top.
This manual suits for next models
1
Table of contents
Other Electrolux Hob manuals
Electrolux
Electrolux EQLP4520IK User manual
Electrolux
Electrolux PQX320C User manual
Electrolux
Electrolux EHE 685 User manual
Electrolux
Electrolux EHE 682 User manual
Electrolux
Electrolux EHS6140HOX User manual
Electrolux
Electrolux KGG64375K User manual
Electrolux
Electrolux EHP 6640 P User manual
Electrolux
Electrolux EGT6247 User manual
Electrolux
Electrolux EHS 6631 P User manual
Electrolux
Electrolux EHM 6731 User manual
Electrolux
Electrolux EHH6332XOK User manual
Electrolux
Electrolux EHH6540FOK User manual
Electrolux
Electrolux EHS7631P User manual
Electrolux
Electrolux EHG 672 User manual
Electrolux
Electrolux EHD30010P User manual
Electrolux
Electrolux EHG 30210 User manual
Electrolux
Electrolux EHGT 318 User manual
Electrolux
Electrolux EHC325BA User manual
Electrolux
Electrolux EHS6610K User manual
Electrolux
Electrolux KTI6430E User manual
