Edelbrock 7798 User manual

Catalog #7798, 7799

Rev. 12/07 - AJ/mc

Brochure #63-0487

BIG BLOCK CHRYSLER VALLEY COVER PLATES

For B and RB Chrysler Engine Blocks

Catalog #7798 & 7799

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with

common tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do

not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified

mechanic. If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific

Standard Time, Monday through Friday or e-mail us at [email protected].

IMPORTANT NOTE: Proper installation is the responsibility of the installer.

Improper installation may result in poor performance and engine or vehicle damage.

DESCRIPTION: These steel Valley Cover Plates are designed to cover the lifter valley of Chrysler big block V8 engines

when Edelbrock Victor Big Block Chrysler cylinder heads #77919 or 77929 are used. A stock sheet-metal valley cover

may not be used with Edelbrock Victor cylinder heads. Part #7798 fits Chyrsler RB (413-426 Wedge-440) engine blocks

and #7799 fits Chrysler B (361-383-400) engines.

KIT CONTENTS:

❑1 Valley Cover Plate

❑14 1/4-20 x 1/2” bolts

INSTALLATION PROCEDURE

(NOTE: Install the valley cover only AFTER your Edelbrock cylinder heads have been installed.)

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech Line: 1-800-416-8628

E-Mail: [email protected]

1. Be sure that the mating surfaces of the block and the surface of the cylinder heads that will meet the valley

cover are thoroughly clean and free of any oils or debris before installation. Use alcohol or lacquer thinner

on a lint-free rag to clean.

2. Apply a continuous, 1/8” bead of automotive RTV silicone sealer to the end sealing surfaces on block and

along bottom of intake flange on the cylinder head where it will meet the valley cover.

3. Pay special attention to the corners of the cylinder heads where they meet the end seal surfaces (Use a

bit more silicone here).

4. Position the valley cover in place on the engine and install the supplied bolts.

5. Tighten bolts to 10-12 ft./lbs., starting in the center and working your way to the ends.

6. Place the intake manifold in position and torque manifold bolts to 25 ft. lbs., following the factory torque

sequence.

This manual suits for next models

Table of contents

Other Edelbrock Automobile Part manuals

Edelbrock

Edelbrock Chevrolet 5783 User manual

Edelbrock

Edelbrock 16211-MBN-640 Owner's manual

Edelbrock

Edelbrock Russell R08367 User manual

Edelbrock

Edelbrock Torker-Plus 265-400 User manual

Edelbrock

Edelbrock 2886 User manual

Edelbrock

Edelbrock 3530 User manual

Edelbrock

Edelbrock SBC Vortec 283-400 c.i.d. Chevy V8 User manual

Edelbrock

Edelbrock 71850 User manual

Edelbrock

Edelbrock 5776 User manual

Edelbrock

Edelbrock PERFORMER RPM 60549* User manual

Edelbrock

Edelbrock PERFORMER-PLUS 2182 User manual

Edelbrock

Edelbrock 770769 User manual

Edelbrock

Edelbrock 2WD 350 V8 User manual

Edelbrock

Edelbrock Russell 651105 User manual

Edelbrock

Edelbrock Camaro 5290 User manual

Edelbrock

Edelbrock 5786 User manual

Edelbrock

Edelbrock 5684 User manual

Edelbrock

Edelbrock Honda TRX450R Owner's manual

Edelbrock

Edelbrock 5624 User manual

Edelbrock

Edelbrock 5791 User manual

Edelbrock

Edelbrock 3886 User manual

Edelbrock

Edelbrock 3562 User manual

Edelbrock

Edelbrock 6719 User manual

Edelbrock

Edelbrock 6571 User manual

Popular Automobile Part manuals by other brands

Dakota Digital

Dakota Digital 650277 Installation

bosal

bosal 037031 Fitting instructions

Vintage Air

Vintage Air 571063 manual

GFB

GFB EX38 instruction manual

bosal

bosal 028091 Fitting instructions

Dodge

Dodge 8W-43 Wiring diagram

ICI

ICI Magnum FBM10DGN Installation

Volant Perfomance

Volant Perfomance 19435 installation instructions

BENDIX

BENDIX GEN 4 GEN 5 ABS manual

Vintage Air

Vintage Air 571065 manual

Rugged Ridge

Rugged Ridge 11503.13 installation instructions

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER instructions

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... maintenance

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G operating manual

Toshiba

Toshiba 48-1250 A instruction manual

aldes

aldes EHT2 installation instructions

Go Rhino

Go Rhino 24371T installation instructions

BBK

BBK 18950 installation instructions