Edelbrock 15010 User manual

Catalog #15010

Rev. 11/06 - RS/mc

Brochure #63-0250

OIL SUPPLY ADAPTER

For Honda/Acura B-Series and D-Series Engines

Catalog #15010

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and

procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation,

it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at:

1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at [email protected].

IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation

will void your warranty and may result in poor performance and engine or vehicle damage.

DESCRIPTION: Designed for Honda/Acura B-Series and D-Series engines equipped with or without a factory water-cooled oil cooler, this kit can

supply oil for a VTEC conversion or for a turbocharger. The adapter also includes a port for an oil pressure gauge. The adapter fits directly between

the engine block, or factory oil cooler, and the stock oil filter.

KIT CONTENTS:

❑1 Oil Supply Sandwich Adapter Assembly

INSTALLATION PROCEDURE

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech Line: 1-800-416-8628 • E-Mail: [email protected]

-6AN Fitting

Towards Engine Block

Tighten Using

1/2” Allen

Wrench

Fig. 1

1. Remove the stock oil filter (replace with a new filter).

2. Install the Oil Supply Sandwich Adapter in place of the stock oil filter.

3. Make sure the O-Ring is facing toward the engine block, and the threaded stud with ½” hex opening is facing out

(See Fig. 1)

4. Although it is a tight fit, the aluminum housing and the threaded center stud will turn independently of each other. Start the assembly onto the

engine by hand at first. Then, while holding the outer housing in position, tighten the threaded center with a ½” Allen wrench. Make sure to

position the -6 AN (blue) fitting so that it is facing toward the driver’s side, pointing upward slightly (about the 10 o’clock position)

(See Fig. 1)

5. Install a new oil filter.

6. Attach an appropriate supply line for the accessory requiring an oil supply. A supply line can be attached using a -6AN (female) fitting. You may

also attach an oil pressure gauge line to the 1/8 NPT port on the Oil Supply Adapter by removing the 1/8 NPT plug, and installing your gauge

fitting.

1/8 NPT Plug

(Not Visible)

Table of contents

Other Edelbrock Automobile Part manuals

Edelbrock

Edelbrock 5790 User manual

Edelbrock

Edelbrock E-Street 2 User manual

Edelbrock

Edelbrock 63-0342 User manual

Edelbrock

Edelbrock 5682 User manual

Edelbrock

Edelbrock Performer Multipoint 3501 Technical document

Edelbrock

Edelbrock PERFORMER RPM 60549* User manual

Edelbrock

Edelbrock 6564 User manual

Edelbrock

Edelbrock Square-Bore Carb 2696 User manual

Edelbrock

Edelbrock 6606 User manual

Edelbrock

Edelbrock 5708 User manual

Edelbrock

Edelbrock 71003 User manual

Edelbrock

Edelbrock 68512 User manual

Edelbrock

Edelbrock 7129 User manual

Edelbrock

Edelbrock 70206 User manual

Edelbrock

Edelbrock 3637 User manual

Edelbrock

Edelbrock 2917 Nstallation User manual

Edelbrock

Edelbrock 6668 User manual

Edelbrock

Edelbrock 2994 User manual

Edelbrock

Edelbrock 5747 User manual

Edelbrock

Edelbrock 66492 User manual

Edelbrock

Edelbrock 71884 User manual

Edelbrock

Edelbrock 389-455 User manual

Edelbrock

Edelbrock 2 & 4 W/D User manual

Edelbrock

Edelbrock 70403 User manual

Popular Automobile Part manuals by other brands

Dakota Digital

Dakota Digital 650277 Installation

bosal

bosal 037031 Fitting instructions

Vintage Air

Vintage Air 571063 manual

GFB

GFB EX38 instruction manual

bosal

bosal 028091 Fitting instructions

Dodge

Dodge 8W-43 Wiring diagram

ICI

ICI Magnum FBM10DGN Installation

Volant Perfomance

Volant Perfomance 19435 installation instructions

BENDIX

BENDIX GEN 4 GEN 5 ABS manual

Vintage Air

Vintage Air 571065 manual

Rugged Ridge

Rugged Ridge 11503.13 installation instructions

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER instructions

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... maintenance

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G operating manual

Toshiba

Toshiba 48-1250 A instruction manual

aldes

aldes EHT2 installation instructions

Go Rhino

Go Rhino 24371T installation instructions

BBK

BBK 18950 installation instructions