EControls E-Detector Noiseless User manual

Electronic Intelligent Controls, S.L. 08830 Sant Boi de Llobregat Tel.: +34 93 652 55 21 www.e-controls.es

C/ Murcia, 35 F Barcelona, Spain Fax: +34 93 652 55 22 info@e-controls.es

e-Detector Noiseless

Motion sensor with transistor output for ceiling mounting

Product reference: DP.801110-010

e-Detector Noiseless is a motion sensor for ceiling

mounting, used to detect motion through the detection

of heat changes coming from bodies in motion in the

covering area. The device is including an infrared sensor

that detects with high precision any movement in a room

or zone in a building.

The product includes an optocoupled transistor output

that avoids any noise of the traditional mechanical relays,

and has been designed to be connected at a voltage digital

input of a system to monitor the motion detected.

Instruction Sheet

INS1215507000-1

e-Detector Noiseless is a motion sensor for celing mounting

used to detect people or bodies in motion in a building.

The device has an infrared motion sensor that detects any

movement with a very high precision and a transistor output

type is used to connect the device to a voltage digital input,

that activates every time a valid movement is detected.

The output becomes active during 5 seconds after a valid

detection. The device has a potentiometer to adjust the

sensitivity of the motion sensor providing a very exible

device installable in any environment.

A red LED indicator in the front cover of the device blinks

shortly when the device is detecting motion. The pushbutton

is used to disable the LED indictor function, avoiding lighting

it when a movement is detected. To do this, press the front

pushbutton between 2 to 5 seconds to enable/disable this

function.

Product description

Mounting instructions

• Do not leave cables peeled or turned around the device.

• Do not connect the device with the hands wet.

• Do not open or drill the device

• Keep the device and cables away from humidity and dust.

• Clean the front cover with a water moisture soft cloth.

Caution:

• Disconnect the device from the power supply before

mounting or moving the sensor.

• The device can’t be installed over shelves, behind curtains,

near heat/cool air handling units and avoid direct sun

radiation over the device.

The device has an enclosure for ush mounting on roof

ceilings.

Mounting instructions:

1. Drill a 65mm diameter hole on the ceiling.

2. Connect wires on the correct terminals:

3. Adjust sensibility detection potentiometer on the side of

the device, to the desired value.

4. Clip the springs and insert the product into the hole,

releasing the springs when placed in the hole.

5. Power up the supply voltage and check the red LED indicator

is switched on during some seconds (warm up time).

• Connect the power supply to the +/ ~ y -/ ~ terminals.

• Connect the transistor output + and - to the digital

input terminals, respecting the polarity.

Wiring diagram and mechanical description

Front view

Motion

sensor

Pushbutton

Motion

indicator

Digital

Input

-/~

+/~

12-24V

-/~

+/~

e-controlse-controls

IP20

Made in Spain

www.e-controls.es

Output

Supply

Input

Ref. DP.801110-010

AC 12-24 V, 46mA

DC 12-24 V, 16mA

Motion detector transistor output

e-Detector Noiseless

Lateral view

Motion

sensitivity

adjustment

WARRANTY VOID

IF BROKEN

Detection

The package of this product is considered as industrial packaging; intended for professional use only.

The manufacturer is not responsible of the incorrect installation or use of the products.

Specications are subject to change without notice.

INS1215507000-1

Supply power

Operating voltage. . . . . . . . . . . . . . . 12-24 Vca/Vcc ±20%

Operating nominal current . . . . 16mA@12Vcc, 39mA@12Vca

16mA@24Vcc, 46mA@24Vca

Motion sensor

Technology . . . . . . . . . . . . . . . . . . . . . . . . PIR (Infrared)

Number of pyro elements . . . . . . . . . . . . . . . . . . . . . . 4

Number of detection zones. . . . . . . . . . . . . . . . . . . . 88

Detection angle (X, Y) . . . . . . . . . . . . . . . . . . . . .+/- 50º

Detection range (at 2,5 m from oor). . . . . . . . . . 6 meters

Maximum detection distance . . . . . . . . . . . . . . 10 meters

Detection diagram . . . . . . . . . . . . . . . . . . . . . See table

Mean time for stabilization . . . . . . . . . . . . . . . . . . . 60 s.

Sensitivity adjustment . . . . . . . . . . . . . . . . Potentiometer

Output signal. . . . . . . . . . . . . . . . Transistor (see Output)

Output

Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optoisolated

Output type. . . . . . . . . . . . . . . . . . . . . . .Open collector

Maximum voltage . . . . . . . . . . . . . . . . . . . . . . . + 75 V

Maximum current . . . . . . . . . . . . . . . . . . . . . . . + 10 mA

Maximum power allowed . . . . . . . . . . . . . . . . .+ 150 mW

Detection pulse time . . . . . . . . . . . . . . . 1 s ON / 1,5 s OFF

Stand-by state (no detection) . . . . . . . . . . . . . . . . .Open

Front panel LED indicator

Colour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Red

On/O . . . . . . . . . . . . . . . . . . Motion detected/Stand-by

Pushbutton

Long push . . . . . . . . . . . . . . . . . LED blink enable/disable

Mechanical installation

Installation . . . . . . . . . . . . . . . Flush mounting on ceiling

Fixation . . . . . . . . . . . . . . . . . . . . . . . . 2 metal springs

Hole diameter . . . . . . . . . . . . . . . . . . . . . . . . . . 65 mm

Max ceiling thickness. . . . . . . . . . . . . . . . . . . . . . 19 mm

Internal height on ceiling . . . . . . . . . . . . . . . . . . . 45 mm

Mechanical features

Dimmensions. . . . . . . . . . . . . . . . . . . . 80x50mm (ØxH)

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 g

Colour (front) . . . . . . . . . . . . . . . . . . . . . . . . . RAL 9016

Enclosure material. . . . . . . . . . . . . . . . . . . . . . . . . . . PP

Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . Screw type

Wire section. . . . . . . . . . . . . . 0,5 mm2- 2,5 mm2 (14 AWG)

Temperature

Operating . . . . . . . . . . . . . . . 0ºC to +50ºC (32ºF to 104ºF)

Storage. . . . . . . . . . . . . . . -20ºC to +85ºC (-4ºF to +185ºF)

Humidity (no condensation)

Operating . . . . . . . . . . . . . . . . . . 10% to 90% RH at 50ºC

Storage. . . . . . . . . . . . . . . . . . . . . . . . . 95% RH at 50ºC

Product Family Standards

Automatic electrical controls for household and similar use.

General requirements. . . . . . . . . . . . . . . . . . . EN 60730-1

CE Conformity

Low Voltage Directive . . . . . . . . . . . . . . . . . 2006/95/EC

Electromagntic Compatibility Directive . . . . . . 2004/108/EC

Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CE

Safety

Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . EN 60730-1

IEC Protection Class . . . . . . . . . . . . . . . . . . . . . . Class III

Environmental protection level . . . . . . . . . . . . . . . . IP20

EMC

Emissions . . . . . . . . . . . . . . . . . . . . . . . . .EN 61000-6-3

Immunity . . . . . . . . . . . . . . . . . . . . . . . . .EN 61000-6-1

NOTES:

1) The device is not intented for use as part of a security

system detector.

2) Installer should adjust the sensibility potentiometer to the

environment where device will be installated, for an optimal

detection of the motion sensor.

e-Detector Noiseless, Motion sensor with optoisolated output, ceiling mounting . . . . . . . . . . . . . . . . . . . . DP.801110-010

Surface mounting enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC.000001-000

Features

Product reference

Popular Accessories manuals by other brands

Hillco

Hillco 2810 Operator's manual

Siemens

Siemens QSA2700D Basic documentation

Contours

Contours ZY024 manual

Saivod

Saivod VS621 manual

Virtuox

Virtuox VirtuCLEAN 2.0 user manual

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS user manual

Z-Wave

Z-Wave HSD-200Z user manual

turck

turck FMX-IM-2UPLI63FX quick start guide

Decagon Devices

Decagon Devices 10HS manual

UPPAbaby

UPPAbaby Cup Holder user manual

Elko

Elko SmartSensor Leakage Wireless manual

Grizzly

Grizzly H8371 instructions

Panasonic

Panasonic HG-T Series user manual

IFM Electronic

IFM Electronic Efector 250 Series Brief instructions

DigiDesign

DigiDesign 888/24 I/O installation guide

PROZIS

PROZIS QUAY user manual

patagonia

patagonia PSI Vest user manual

SFC Energy

SFC Energy EFOY GO! manual

eControls E-Detector Noiseless User manual

Popular Accessories manuals by other brands