Ebyte E103-W05 User manual

E103-W05 User Manual

W600 20dbm WIFI Module

Chengdu Ebyte Electronic Technology Co., Ltd E103-W05 User Manual

Contens

1. OVERVIEW.............................................................................................................................................................2

1.1 BRIEF INTRODUCTION.................................................................................................................................................. 2

1.2 FEATURES..................................................................................................................................................................... 2

1.3 APPLICATIONS ............................................................................................................................... 2

1.4 CONNECTION MODE.....................................................................................................................................................3

1.5 PARAMETERS................................................................................................................................................................ 3

1.6 ELECTRONIC PARAMETERS...........................................................................................................................................4

2. HARDWARE PARAMETERS...............................................................................................................................5

2.1 PIN DEFINITION............................................................................................................................................................ 5

2.2 POWER CONSUMPTION.................................................................................................................................................6

2.3 DIAGRAM..................................................................................................................................................................... 6

3. QUICK START........................................................................................................................................................7

3.1 BEFORE TESTING..........................................................................................................................................................7

3.2 STEPS FOR MODULE TO WORK IN AP MODE AS TCP SERVER...................................................................................... 8

3.2.1 Brief Introduction................................................................................................................................................. 8

3.2.2 Network model..................................................................................................................................................... 8

3.2.3 Setting...................................................................................................................................................................8

3.3 STEPS FOR MODULE TO WORK IN STA MODE AS TCP CLIENT.................................................................................. 11

3.3.1 Brief Introduction............................................................................................................................................... 11

3.3.2 Network model................................................................................................................................................... 11

3.3.3 Setting.................................................................................................................................................................12

3.4 GUIDE FOR AIRKISS APP FOR ANDROID.................................................................................................................... 15

3.4.1 APP Setting.........................................................................................................................................................15

3.4.2 WIFI RF Setting Software Setting......................................................................................................................16

3.5 GPIO SETTING........................................................................................................................................................... 16

3.5.1 AT+CIOMODE to Set GPIO working mode......................................................................................................16

3.5.2 AT+CIOWRITE to set GPIO Level....................................................................................................................17

3.5.3 AT+CIOREAD to Read GPIO Level..................................................................................................................17

3.5.4 Pin AT Command Example................................................................................................................................ 17

3.6 SERIAL PORT BAUD RATE SETTING............................................................................................................................. 18

4. NOTICE................................................................................................................................................................. 19

4.1 RELATION OF AP，STA AND SERVER CLIENT...........................................................................................................19

4.2 TRANSPARENT TRANSMISSION................................................................................................................................... 19

4.3 MAXIMUM NUMBER OF AP CONNECTIONS AND SERVER CONNECTIONS.................................................................... 19

4.4 AT COMMAND............................................................................................................................................................20

5. HARDWARE NOTICE........................................................................................................................................ 20

6. FAQ......................................................................................................................................................................... 21

6.1 COMMUNICATION RANGE IS TOO SHORT.................................................................................................................. 21

6.2 MODULE IS EASY TO DAMAGE................................................................................................................................. 21

6.3 BIT ERROR RATE IS TOO HIGH.................................................................................................................................. 21

7. REVISION HISTORY..........................................................................................................................................22

8. ABOUT US............................................................................................................................................................. 22

Chengdu Ebyte Electronic Technology Co., Ltd E103-W05 User Manual

1. Overview

1.1 Brief introduction

E103-W05 is a cost-effective 100mW (20dBm) wifi module. It works in the

2.4~2.483GHz frequency band, the module is small, has an onboard PCB antenna and

low power consumption, and the data transmission is fast. The module can use the

serial port to send and receive data and use AT commands to set parameters which are

mostly compatible with the E103-W01 module. Both former and new users can

quickly use it, making it a good data transmission partner in IoT applications.

The E103-W05 module was developed by Ebyte based on the WinnerMicro

W600 chip. The module integrates transparent transmission function, ready to use,

supports serial AT command set, server AT command set, users can use the Internet through the serial port. This module

is widely used in IoT applications such as smart appliances, smart homes, wireless audio and video, smart toys, medical

monitoring, industrial control, etc.

1.2 Features

Support transparent transmission at boot, automatic connection when disconnected

Support multiple baud rates

Support SmartConfig configuration function

Support TCPServer, TCPClient, UDP

Three working modes STATION, AP, STATION&AP

Support 14mA low power data reception

Support serial port transparent transmission

Support multiple encryption methods

Support module serial AT command configuration

Built-in watchdog, never crash

Parameter memory, save after power off

1.3 Applications

Wireless meter reading

Wireless sensing

Smart home

Industrial remote control and telemetry

Intelligent buildings and intelligent buildings

High-voltage line monitoring

Environmental Engineering

Highway

Chengdu Ebyte Electronic Technology Co., Ltd E103-W05 User Manual

Small weather station

Automated data collection

Consumer Electronics

smart robot

Street light control

1.4 Connection Mode

NO.

Connection

Description

Module to

Module

Module 1 is set to AP mode as a TCP or UDP server. Module 2 is set

to STATION mode and connected to AP No. 1 for communication,

through TCP or UDP Client mode.

Module to

Server

The Wi-Fi module is connected to the Internet through a wireless

router, and communicates with servers on the network (LAN or

Internet) via TCP Client or UDP. To connect to the Internet server,

users need to configure the correct port mapping on the wireless

router.

Module to

Client

The Wi-Fi module connects to the Internet through a wireless router

to establish a TCP or UDP Server to listen for connection signals. The

Client module communicates with the module server by connecting to

it.

For more usage methods, please refer to Section 5 Networking Instructions.

1.5 Parameters

No.

Name

Value

Note

RF chip

W600

Beijing WinnerMicro

Dimensions

19*13*0.8mm

(L*W*H)

PCB process

2 layers

Impedance debugging

Working frequency

2.4~2.4835 GHz

Production Process

Immersion gold process, half

hole process, machine SMT

Wireless products must be machine-attached

to ensure batch consistency and reliability

Interface Type

1.27mm

Stamp hole

Supply voltage

3.0 ~ 3.6V DC

Voltage higher than 3.6V will cause

permanent damage to the module

Communication level

3.6(max)

The voltage difference should be less than

0.3V to reduce power consumption

Tested range

100m

open and clear sky, no obstacles, maximum

power, antenna height 1.6m

Transmit power

20dBm

100mW

AT support

Built-in intelligent processing

Can be read by AT command

Wi-Fi version

802.11 b/g/n

Communication

Interface

UART serial port

RF interface

PCB onboard antenna

50Ω characteristic impedance

Operating temperature

-40 ~ +85℃

Industrial grade

Working humidity

10% ~ 90%

Relative humidity, no condensation

Storage temperature

-40 ~ +125℃

Industrial grade

product weight

0.8±0.1g

Chengdu Ebyte Electronic Technology Co., Ltd E103-W05 User Manual

1.6 Electronic Parameters

Para.

Condition

Min

Typical

Max

Unit

Storage temperature

range

-40

Normal

temperature

125

℃

Welding temperature

IPC/JEDECJ-STD-

020

260

℃

working Voltage

3.0

3.3

3.6

Any IO

VIL/VIH

-0.3/0.75VIO

0.25VIO/3.6

VOL/VOH

N/0.8VIO

0.1VIO/N

IMAX

Electrostatic discharge

(human body model)

TAMB=25℃

Electrostatic discharge

(machine model)

TAMB=25℃

0.5

Chengdu Ebyte Electronic Technology Co., Ltd E103-W05 User Manual

2. Hardware Parameters

2.1 Pin Definition

Pin No.

Name

I/O

Function

GND

GND pin

GND

GND pin

VCC

Power supply VDC: 3.0V-3.6V (above 350mA)

PA0/GPIO0

I/O pins

PA1/GPIO1

I/O pins

PA4/GPIO4/TX

TXD pin, used as UART serial port output pin, support AT command

PA5/GPIO5/RX

RXD pin, used as UART serial input pin, support AT command

PB13/GPIO13

I/O pins

PB14/GPIO14

I/O pins

PB15/GPIO15

I/O pins

PB16/GPIO16

I/O pins

PB17/GPIO17

I/O pins

PB18/GPIO18

I/O pins

PB6/GPIO6

I/O pins

PB7/GPIO7

I/O pins

PB8/GPIO8

I/O pins

PB9/GPIO9

I/O pins

PB10/GPIO10

I/O pins

PB11/GPIO11

I/O pins

Chengdu Ebyte Electronic Technology Co., Ltd E103-W05 User Manual

PB12/GPIO12

I/O pins

WAKE

Wake up pin, high level will wake up the chip to work

RST

Reset pin, low level will reset

I = input, O = output, P = power

2.2 Power Consumption

Mode

Min

Typical

Max

Unit

Tx802.11b,CCK 11Mbps,POUT=+19dBm

230

Tx802.11g,OFDM 54Mbps,POUT=+13.5dBm

210

Tx802.11n,MCS7,POUT=+12dBm

210

IEEE802.11b/g/n receivig

100-110

Sleep

0.9

Deep Sleep

2.3 Diagram

Chengdu Ebyte Electronic Technology Co., Ltd E103-W05 User Manual

3. Quick Start

The E103-W05 module is simple, easy to use, and easy to access the network. It is compatible with most AT

commands of E103-W01 so that it can use E103-W01 controller to easily set the parameters of E103-W05. Users can

refer to several working modes of the module to use the module: module to module, module to server, module to client.

When configuring the parameters of the module, the user first needs to ensure that the operating voltage of the

module is 3.0~3.6V (typical value is 3.3V), and then confirm that the serial port pins have been correctly connected with

the relevant serial port tools and can communicate normally.

3.1 Before Testing

Hardware needed：

E103-W05 model Wi-Fi module

E103-W05 model Wi-Fi module test board

one PC

1 router (can be replaced by mobile Wi-Fi hotspot)

The software Needed (with download link)

AccessPort/XCOM serial debugging tool

TCP&UDP test tool

"AirkissDebug" APP for Andriod

E103-W05 software

Chengdu Ebyte Electronic Technology Co., Ltd E103-W05 User Manual

3.2 Steps for Module to work in AP mode as TCP server.

3.2.1 Brief Introduction

1. The user searches the hot spot of the E103-W05 module through the computer and connects to it.

2. The user establishes a TCP Client on the PC and connects to the listening port of the module TCP Server to achieve

communication.

3.2.2 Network model

3.2.3 Setting

A. Open the E103-W01 configuration software, select the serial port number(1) and baud rate(2) (default 115200), query

the version information(3), and check whether the receiving box(4) has version-related data. If there is, it means that the

communication is normal. As shown below:

Chengdu Ebyte Electronic Technology Co., Ltd E103-W05 User Manual

B. Set the working mode of the module to AP, and set the relevant AP parameters, such as AP name, password,

encryption method, channel number, etc.

C. After the setting is successful, we can search through the WIFI in the lower right corner of the computer to search out

our module and connect it.

Other manuals for E103-W05

Table of contents

Other Ebyte Network Card manuals

Ebyte

Ebyte E103-W01 User manual

Popular Network Card manuals by other brands

FirstComm

FirstComm OBiWiFi5G Setup guide

Sun Microsystems

Sun Microsystems Interface Adapter user guide

TRENDnet

TRENDnet TU2-ETG user guide

YASKAWA

YASKAWA SI-EN3 Technical manual

Paradyne

Paradyne BitStorm 2600 IP DSLAM installation guide

Belkin

Belkin F5D7050 user manual

3Com

3Com EtherLink 3C509B quick guide

TRENDnet

TRENDnet TEG-PCITX user guide

Cisco

Cisco MC16E installation guide

Delta Electronics

Delta Electronics Braking Modules VFDB Series instruction sheet

TwinMOS

TwinMOS Booming user manual

Dialogic

Dialogic Media Board DM/V1200BTEPEQ installation guide

Buffalo

Buffalo AirStation WLI-PCM-L11GP user manual

National Instruments

National Instruments NI 9234 operating instructions

Hama

Hama 49276 Operating instruction

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Product data

Compaq

Compaq Wireless LAN 100 specification

Bose

Bose PowerMatch Dante quick start guide