Eaton iLIGHT TSE55 User manual
Planning the installation
TSE55 requires a minimum mounting depth of
20mm from the front wall surface plus room
for cable/s. Power is supplied by Power Over
Ethernet (PoE). PoE must meet the IEEE 802.3af
standard. TSE55 connects to the local network
via a hard wired Ethernet connection.
Installation
TSE55 has been designed to mount to a Standard UK
single gang back box, a standard European single gang
back box as well as a standard US NEMA single gang
back box. Minimum depth: 47mm
The mounting frame, included with this unit, should be
attached to the back box using the screws supplied
with the back box.
Installing the mounting frame
TSE55 includes a mounting frame that MUST be used
for this installation.
Using the screws supplied with the backbox, mount
the mounting bracket onto the back box
Mounting height
The recommend mounting height for the
TSE55 is 145 cm -165 cm above the nished
oor to the center of the unit.
TSE55 - Colour Touchscreen
Installation guide
Tighten the 2 captive
screws (one at each side)
to secure the TSE55 to
the mounting bracket
Mounting the TSE55
Align the mounting frame
hooks with the TSE55
mounting slots and gently
push the TSE55 unit onto
the mounting bracket.
Make sure the mounting
hooks are properly
engaged.
UK
Back Box TSE55
EURO NEMA
Mounting Bracket
PoE and Data Connection (RJ45)
Power connection
TSE55 is designed to be powered over the Ethernet
connection (PoE).
PoE Connection
PoE connection requires IEEE 802.3af standard. Utilise a
network switch or PoE injector that meets this standard.
Connect the TSE55 using a standard CAT5E or CAT6
Ethernet cable from the network switch to the LAN/PoE
jack on the back of the TSE55.
Connecting Ethernet
When not utilizing a PoE switch, it is recommended
that you connect the TSE55 to a network switch via
a PoE injector.
Utilizing a standard CAT5E or CAT6 network Ethernet
cable connect to the LAN/PoE jack.
Removing the TSE55
Loosen the 2 captive screws on the TSE55 and pull away
from the mounting frame to disengage the unit.
Specications
Dimensions: 148mm W (5.8”) x 87mm H (3.42”)
Mounting depth: 22mm (0.86”)
Display: 5.5” (139.7mm Diagonal)
Resolution: 1280 x 720
Network: 10/100/1000 Ethernet
Connections: LAN/PoE RJ-45
Power Requirements: PoE - IEEE 802.3af,
13W maximum draw (@48 V 270 mA max)
Document: TSE55 9850-000655-02
Eaton - Lighting Systems
Usk House, Lakeside, Llantarnam Park, Cwmbran, NP44 3HD, UK
T: +44 (0)1923 495495 F: +44 (0)1923 228796
E&OE. Changes to the products, to the information contained in this
document, and to prices are reserved; so are errors and omissions. © Eaton
Other Eaton Touchscreen manuals
Eaton
Eaton XP-503 User manual
Eaton
Eaton XV100 User manual
Eaton
Eaton Cutler-Hammer PanelMate Power Pro 1785... Guide
Eaton
Eaton PXM8K Series User manual
Eaton
Eaton HMi Series Manual
Eaton
Eaton iLumin Plus TSE80-B User manual
Eaton
Eaton TSE80 User manual
Eaton
Eaton PXBCM-DISP-6 User manual
Eaton
Eaton XV-102 Series User manual
Eaton
Eaton 818-7242 User manual
Popular Touchscreen manuals by other brands
Elecro Engineering
Elecro Engineering Poolsmart Plus Installation & operating manual
Johnson Controls
Johnson Controls IQ4 HUB installation manual
Elo TouchSystems
Elo TouchSystems ET2270L user manual
Elo TouchSystems
Elo TouchSystems ET1002L user manual
Elo TouchSystems
Elo TouchSystems 3201L user manual
Duratec
Duratec S15 user manual
