Dynojet POWER COMMANDER III User manual

i802-511 www.powercommander.com 99-01 Harley Davidson TC88 - PCIII USB - 1

1999-2001 Harley Davidson

Installation Instructions

Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com

Parts List

1Power Commander

1USB Cable

1CD-ROM

1Installation Guide

1Power Adapter

2Power Commander Decals

2 Dynojet Decals

2 Velcro®Strip

1Alcohol Swab

3Zip ties

You can also download the Power

Commander software and latest maps

from our web site at:

www.powercommander.com

The ignition MUST be turned

OFF before installation!

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

Button Adjustment Display

Faceplate Buttons

USB Port

Expansion Port

Touring Models

i802-511 www.powercommander.com 99-01 Harley Davidson TC88 - PCIII USB - 2

1Remove the seat.

2Remove saddlebags if installed.

3Remove left and right side

covers.

4Remove the battery (negative

terminal first).

5Loosen the two 7/16 nuts that

retain the ECM to the battery

tray enough to pull the ECM

away from the frame (Fig. A).

6From the left side (underneath

the left side cover area) feed the

PC III connectors in front of bat-

tery tray, and out the right side

(in front of the ECU bracket)

(Fig. B).

Fig. A

Fig. B

Loosen these bolts

PCIII connector

There are two methods of installation of the Power Commander.

1The Standard install takes 30 minutes to accomplish, but the fit is better.

2The Quick install takes about 15 minutes. While this method is easier,

it may allow wiring to be visible with certain aftermarket seat assemblies.

STANDARD INSTALLATION

10 Plug the PCIII connectors in-line

of the stock ECM and wiring

harness (Fig. E). Make sure to

use the supplied rubber strap

over the connectors.

11 Use the supplied zip ties to

secure the connectors in place.

12 Tighten down the 7/16 nuts that

hold the ECM to the battery tray.

13 Reinstall bodywork.

Fig. E

i802-511 www.powercommander.com 99-01 Harley Davidson TC88 - PCIII USB - 3

8Disconnect the large connector

from the ECU. Carefully

remove the rubber dust shield.

9Install the dust shield onto the

matching connector on the

PCIII.

Fig. D Fig. C

Rubber boot properly installed on ECM

Attach PCIII here

7Attach PC III module to battery

box. First, clean the PCIII and

battery box with the supplied

alcohol wipe. Using the supplied

velcro attach PCIII to the battery

box. Also secure the unit with

the included zip ties. If your

bike has cruise control, attach

the unit to the face of the cruise

control module (Fig. C).

PCIII connectors

Stock connector

Strap

1Remove the seat

2Remove right hand side cover.

3Loosen the two 7/16 nuts that retain the ECU (Fig. A)

4Disconnect the large connector from the ECU. Remove the rubber

dust shield and install on the male connector of the PCIII. Make

sure the rubber boot is properly installed (Fig. D).

5Connect the PCIII male connector to the stock ECU.

6Connect the female connector from the PCIII to the stock wiring har-

ness (Fig.E). Use the rubber strap to secure the connectors to each

other.

7 Tighten ECU retaining nuts.

8Attach PCIII to the battery tray or slide the unit under the battery

tray.

9Reinstall side cover and seat.

i802-511 www.powercommander.com 99-01 Harley Davidson TC88 - PCIII USB - 4

QUICK INSTALLATION

Table of contents

Other Dynojet Motorcycle Accessories manuals

Dynojet

Dynojet Power commander V User manual

Dynojet

Dynojet Power Commander III USB EX User manual

Dynojet

Dynojet Power commander V User manual

Dynojet

Dynojet Power commander V User manual

Dynojet

Dynojet Power commander V User manual

Dynojet

Dynojet Power commander V Quick start guide

Dynojet

Dynojet Power Comander III User manual

Dynojet

Dynojet Power Commander III 705-411 User manual

Dynojet

Dynojet Power commander V User manual

Dynojet

Dynojet POWER COMMANDER FC User manual

Dynojet

Dynojet Power commander V User manual

Dynojet

Dynojet POWER COMMANDER III User manual

Dynojet

Dynojet Power Commander III User manual

Dynojet

Dynojet Power commander V User manual

Dynojet

Dynojet Power Commander III EX User manual

Dynojet

Dynojet Power commander III User manual

Dynojet

Dynojet Power commander V User manual

Dynojet

Dynojet POWER COMMANDER III User manual

Dynojet

Dynojet Quickshifter User manual

Dynojet

Dynojet Power Commander III User manual

Dynojet

Dynojet POWER COMMANDER III User manual

Dynojet

Dynojet Power commander V User manual

Dynojet

Dynojet Power Comander V User manual

Dynojet

Dynojet Power commander V User manual

Popular Motorcycle Accessories manuals by other brands

SRC

SRC B-TRK502-01-01-SL quick start guide

3M Speedglas 9100 MP operating instructions

hepco & becker

hepco & becker 6307520 00 01 manual

HOMCOM

HOMCOM AA0-077 user manual

hepco & becker

hepco & becker 6307558 00 01 manual

Wunderkind Custom

Wunderkind Custom 106503-F15 Installation and safety

Dräger

Dräger HPS 3500 Instructions for use

M-WAVE

M-WAVE SKI manual

Kuryakyn

Kuryakyn 6212 installation instructions

hepco & becker

hepco & becker 6507504 00 01 installation instructions

Tool it

Tool it PROMAX LCD 9.13G manual

Custom Dynamics

Custom Dynamics TruWrapz installation instructions

Roof

Roof RO200 CARBON How to use and maintain

Kabuto

Kabuto Japan IBUKI instruction manual

PUIG

PUIG 5051 Mounting instructions

rizoma

rizoma ZTH050 user manual

Joubert

Joubert 10001711 instruction manual

Sperian

Sperian Optrel p420 manual