Dymo 1570 User manual

DYMO 1570

Adjusting Space on Label Ends

For more blank spaces before and after messages: Turn the tape feeder (B) .

For less blank spaces: Turn the tape feeder (B) in reverse, emboss the message, turn feeder

forward, and cut.

To center a message: Advance completed label 3 spaces (5 space for 1530 Office Mate I)

Squeeze tape cutter.

Troubleshooting

Label shows letters instead of blank space: Squeeze handle half way until you hear a click,

then release.

Letters too light: Squeeze harder by holding the upper end of the handle.

Tape jam: In the unlikely event the tape does not feed properly, remove the tape wheel, discard

left over tape ends, and replace the wheel.

Preparing Problem Surfaces

Use non-residual solvents (i.e., alcohol, acetone) to clean oily or greasy surfaces. If the surface is

rough or porous, coat it with a sealer (i.e. shellac, lacquer). Once stuck, water will not affect the

label. Do not apply labels to surfaces exceeding 140 F.

1. Load Tape

Expose 3" of the tape, open the tape compartment (A), and insert so that ‘U’ shape opening in the

tape cartridge points down. Insert the tape into the feed slot and thread forward until visible.

Close the tape compartment to lock in the tape.

2. Advance Tape

By turning the feeder (B) or with several half-squeezes (squeeze until click sound is audible) of

the handle (F), advance the tape 1/4" past front of embosser.

3. Emboss Letters

Turn the wheel (E) until the desired letter aligns with selector. Squeeze the handle (F) firmly and

repeat for each letter. To space between words, half-squeeze handle until click is heard.

DO NOT HOLD WHEEL WHILE EMBOSSING.

4. Cut Tape

Squeeze the cutter (C) and remove excess tape from the end of the embosser.

5. Apply Label

Pull the end of the tab to strip the backing. Apply tape to a clean dry surface.

6. Change Wheel

Push wheel right to left and remove. Snap in the new wheel.

DO NOT SQUEEZE HANDLE WHILE CHANGING WHEEL.

Table of contents

Other Dymo Label Maker manuals

Dymo

Dymo RhinoPRO 5000 User manual

Dymo

Dymo LabelManager 210D User manual

Dymo

Dymo LabelPoint 250 User manual

Dymo

Dymo Rhino 1000 User manual

Dymo

Dymo LP300 User manual

Dymo

Dymo LabelWriter 550 User manual

Dymo

Dymo LabelManager 420P User manual

Dymo

Dymo M1011 User manual

Dymo

Dymo LabelPOINT 350 User manual

Dymo

Dymo LabelManager® 280 with 2 D1 Label... User manual

Dymo

Dymo LabelWriter 400 Duo Guide User manual

Dymo

Dymo LabelWriter DUO User manual

Dymo

Dymo LabelManager 350D User manual

Dymo

Dymo LlM 100+ User manual

Dymo

Dymo Rhino 6500 User manual

Dymo

Dymo LabelPOINT 100 User manual

Dymo

Dymo LetraTAG XM User manual

Dymo

Dymo XTL 300 User manual

Dymo

Dymo LabelManager Wireless PnP User manual

Dymo

Dymo Rhino 5200 Hard case Kit by User manual

Dymo

Dymo RhinoPRO 5000 User manual

Dymo

Dymo LabelWriter 450 Twin Turbo User manual

Dymo

Dymo RHINO 6000 User manual

Dymo

Dymo LetraTag Labelmaker User manual

Popular Label Maker manuals by other brands

Brother

Brother P-Touch 2420PC Quick reference guide

newell

newell Dymo LabelManager 210D user guide

Brother

Brother TD-4000 Gu

U-Line

U-Line BROTHER H-8754 manual

Tharo Systems

Tharo Systems H-435+ user manual

Brother

Brother E300 user guide

Godex

Godex RT700 SERIES Service manual

ID Technology

ID Technology 252 Operator / technical manual

Labelmate

Labelmate MC-11 user manual

CAB

CAB XD4M/300 Service manual

Avery Dennison

Avery Dennison Pathfinder 6057 System administrator guide

Brother

Brother P-touch PT-9700PC user guide

TSC

TSC PEX1000 Series user manual

Adkins

Adkins Label Master user guide

Epson

Epson LabelWorks LW-400 Specifications

Primera

Primera 510212 user manual

Brady

Brady BradyPrinter S3100 quick start guide

DuraLabel

DuraLabel LabPRO user guide