Duronic PS410 User manual
PS410 - 8 Sheet Microcut Shredder
3
English Manual
Manuel d’utilisation en français
Gebrauchsanleitung auf Deutsch
Manual de Instrucciones en Español
Manuale D’istruzioni In Italiano
3
8
13
18
23
Contents
Instrukcja obsługi. Polski 28
3
English Manual
4
Caution
Setup
1. Never allow children to shred or to play with the
paper shredder, or else, serious injury could occur.
2. Do not place hands or ngers into the shredder,
as it could result in serious injury.
3. Never spray canned air or any type of lubricant
into the shredder, while the shredder is plugged in.
4. Never place any lubricants or cleaning solutions
into the paper shredder, as it could result in serious injury.
5. Keep all loose articles of clothing;
ties, jewelry, hair or other items away from
the feed opening, in order to prevent injury.
6. Remove all paper clips and staples from paper before shredding.
The shredder will cut staples and small paper clips,
however, discretion is recommended.
7. Keep the shredder turned off or unplugged,
when not in use for prolonged periods of time.
8. When manually changing feed direction, pause long enough
for the motor to stop, to avoid possible damage to the motor.
9. Turn off and unplug the shredder prior to moving,
cleaning or emptying the wastebasket.
10. Empty the wastebasket frequently to avoid possible paper jams
caused by shredded material being pulled back into the cutter assembly.
1. The PS410 shredder should be placed on a flat, level surface.
Depending on the surface where the shredder is placed,
casters have been included, and can be installed with ease.
It is recommended that casters should be used,
if the shredder is being placed on a hard, smooth surface.
2. Ensure that the wastebasket is inserted into the
shredder and that it ts ush with the shredder cabinet.
3. Plug the power cord into a standard 230-240V AC outlet,
which should be installed near the equipment.
4. Place the power switch into the ON position,
the Power LED should light up.
You are now ready to start shredding.
5
Operation
Shredding Capacity
With the item plugged in, place the power switch in the ON position,.
Ensure the shredder wastebasket is in place, the LED will light up.
This means that the shredder in now ready for operation.
When the paper is inserted into the feed opening, the shredding process will
start automatically, and stop when the paper has completed its travel through
the feed opening.
The PS410 mode selection switch is located on the top of the shredder.
Also located on top of the shredder is the ready LED. Their purposes are:
1. When the power switch is in the ON position,
the shredding process will start when the paper
is inserted into the feed opening, and will continue
until it has completely passed through the feed opening.
2. The reverse button is used to assist in the removal of a paper jam,
which reverses the shredding process prior to a completed forward cycle,
therefore, clearing the cutters. When switching from forward to reverse,
always stop momentarily to prevent prevent possible damage to the motor.
3. It is recommended to turn the shredder off,
when it is not being used for a prolonged period of time.
4. When the ready LED is lit up, it lets the user know that the wastebasket
is inserted correctly, and that the shredder is turned on and ready for use.
If the ready LED does not light up, make sure that the plug is plugged in,
and the basket is inserted correctly.
The PS410 will shred up to 8 sheets of paper and will
accept paper widths up to 220mm.
When shredding small material like envelopes or credit card receipts,
Insert them into the middle of the feed opening.
6
Paper Jams and Motor Overload Protection Circuit
The PS410 is equipped with an automatic motor overload protection circuit.
The PS410 will automatically terminate power, caused by the following
abnormal situations:
1. Operating the shredder at the maximum 8 sheets
capacity continuously for a prolonged period of time.
2. Exceeding the shredding capacity,
eg. Inserting more than 8 sheets of paper in one pass,
or if the paper is not fed squarely int o the feed opening.
Both abnormal operations may result in the activation of the automatic thermal
motor overload protection circuit, which terminates the power to the shredder.
A paper jam could cause the thermal motor overload
protection to terminate AC power to the motor.
Never allow the shredder to remain in a jammed condition
with the AC power turned on, if this occurs:
In case of a minor paper jam:
1. Press the switch in reverse button and pull the remaining sheets of paper
out of the feed opening. Remove the unshredded portion of paper from the
top and clear any excess paper shreds from the feed opening.
In case of a major paper jam:
1. Turn off or unplug the power cord from the AC outlet and wait at least 30
minutes for the thermal overload protection to reset.
2. Plug in the AC power cord and place the Power switch back into the ON
position. If paper was left inside the feed opening prior to the overload,
press the reverse button and grasp the excess paper from the top and
pull it out. Be careful not to place your ngers near the feed opening or, it
could result in serious harm. Clear any excess paper shreds from the feed
opening.
3. You are now ready to resume normal shredding.
Shred Type: Microcut
Shred Width: 4 x 10mm
Shredding Capacity: 8 Sheets
Feed opening: 220mm
Weight: 6.4kgs
Input: 230-240VAC, 50Hz
7
Warranty
1 Year Guarantee from Shine-Mart Ltd, Trademark owners of Duronic Products.
NOTE: THESE STATEMENTS DO NOT AFFECT YOUR STATUTORY RIGHTS AS A
CONSUMER
This product has been manufactured under the strictest or quality control procedures, and
using the highest quality of materials, to ensure excellent performance and reliability. It will
give very good and long lasting service, provided it is properly used and maintained. The
product is guaranteed for 1 years from the date of original purchase. If any defect arises due
to a faulty materials or poor workmanship, the faulty product must be returned to the original
place of purchase. Refund or replacement is at the discretion of that company.
Duronic Products are offered with a 1 year guarantee under the following conditions:
1. The product must be returned to the retailer with original proof of purchase.
2. The product must be installed and used in accordance with the instructions
contained in this operating manual.
3. It must be used only for domestic purposes.
4. It does not cover wear and tear, malicious damage, misuse, neglect,
inexpert repairs or consumable parts.
5. Shine-Mart Ltd has no responsibilities for accidental or consequential loss or damage.
6. Shine-Mart Ltd are not liable to carry out any type of servicing work,
under the guarantee
7. Valid in the UK only
This product is tted with CE:1363 plug and fuse
Imported by Shine-Mart Ltd, RM3 8SB
Information on waste Disposal for Consumers of
Electrical & Electronic Equipment.
This mark on a product and/or accompanying documents indicates that when it
is to be disposed of, it must be treated as Waste
Electrical & Electronic Equipment, (WEEE).
Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used.
For proper treatment, recovery and recycling; please take all WEEE marked
waste to your Local Authority Civic waste site,
where it will be accepted free of charge.
If customers dispose of Waste Electrical & Electronic Equipment correctly, they
will be helping to save valuable resources and preventing any potential negative
effects upon human health and the environment, of any hazardous materials that
the waste may contain.
8
Manuel d’utilisation en français
9
Avertissements de sécurité
Installation
1. Après avoir retiré tous les emballages, insérez les roulettes afin de faciliter
son déplacement.
2. Placez le réservoir en vous assurant qu’il soit soigneusement bien inséré.
3. Branchez l’appareil en vous assurant de respecter le voltage de l’appareil.
4. Appuyez sur l’interrupteur en position « auto ». La lumière s’allumera ce qui
signifie que l’appareil est prêt à l’utilisation.
1. Ne laissez pas les enfants jouer avec cet appareil, de sérieuses blessures
physiques pourraient autrement s’ensuivre.
2. Ne placez pas vos mains ou doigts à l’intérieur de l’appareil, de sérieuses
blessures physiques pourraient autrement s’ensuivre.
3. N’utilisez pas de vaporisateurs pour nettoyer ou lubrifier l’appareil tant que
l’appareil est branché.
4. N’insérez pas de lubrifiants ou de détergents non prévu pour ce type
d’appareil.
5. Gardez vos vêtements, bijoux, cheveux et autres objets hors de portée de
l’ouverture du destructeur de documents, de sérieuses blessures physiques
pourraient s’ensuivre.
6. Retirez les épingles de sureté et autres trombones avant de détruire vos
documents. L’appareil peut détruire ces éléments mais ce n’est pas
recommandé pour prolonger la durée de vie des lames et du moteur.
7. Gardez l’appareil éteint ou débranché lorsqu’il n’est pas utilisé pour une
période prolongée.
8. Lorsque vous changer la direction de l’appareil (marche avant / marche
arrière), veuillez patienter que l’appareil s’arrête afin d’éviter d’éventuels
dommages moteurs.
9. Eteignez et débranchez l’appareil avant de le déplacer, de vider ou de
nettoyer le réservoir.
10. Videz le réservoir fréquemment pour éviter tout bourrage de papier, ce qui
pourrait autrement provoquer le retour du papier.
10
Utilisation
Capacité
Lorsque l’appareil est branché et que l’interrupteur est en position automatique, la
lumière s’allumera. L’appareil est prêt à l’utilisation. Lorsqu’un document est inséré,
le processus de destruction démarrera et s’arrêtera une fois la destruction des
documents achevée.
L’interrupteur dispose de 4 paramètres :
1. Lorsque la position « auto » est sélectionnée, l’appareil s’allumera lorsque du
papier est inséré.
2. La fonction « reverse » permet de lancer la marche arrière en cas de bourrage de
papier. Lorsque vous passer du mode automatique à la marche arrière, veuillez
toujours patienter que l’appareil se soit arrêté afin d’éviter d’endommager le moteur.
3. L’interrupteur « OFF » permet d’éteindre l’appareil. Il est recommandé d’éteindre
l’appareil lorsqu’il n’est pas utilisé fréquemment.
4. Lorsque l’appareil est prêt à l’utilisation, un indicateur lumineux s’allumera. Si
l’indicateur lumineux ne s’allume pas, assurez-vous que l’appareil est branché et
que le réservoir est correctement inséré.
Note
L’indicateur lumineux ne s’allumera pas si l’appareil est éteint (position « OFF ») ou
si la tête n’est pas correctement insérée sur le réservoir.
L’appareil permet de détruire jusqu’à 8 feuilles et acceptera du papier de 220
mm d’épaisseur. Pour détruire des documents plus compacts, tels que des
enveloppes ou des reçus par exemple, insérez-les au milieu de l’ouverture.
Type : micro-coupe
Largeur : 4 x 10 mm
Capacité : 8 feuilles
Ouverture : 220 mm
Poids : 6,4 kg
Voltage : 230-240V AC 50Hz
Table of contents
Languages:
Other Duronic Paper Shredder manuals
Duronic
Duronic PS591 User manual
Duronic
Duronic PS815 User manual
Duronic
Duronic PS712 User manual
Duronic
Duronic PS571 User manual
Duronic
Duronic PS609 User manual
Duronic
Duronic PS285 User manual
Duronic
Duronic PS132 User manual
Duronic
Duronic PS391 User manual
Duronic
Duronic PS991 User manual
Duronic
Duronic PS657 User manual
Popular Paper Shredder manuals by other brands
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Start here
GBC
GBC ShredMaster CC055 instruction manual
UNITED OFFICE
UNITED OFFICE UAV 190 A1 operating instructions
UNITED OFFICE
UNITED OFFICE UAV 190 A1 operating instructions
Rexel
Rexel Optimum AutoFeed+ 45X instruction manual
Martin Yale
Martin Yale 227284S1 instruction manual
