Drive PreserveTech RTL12C002-WH User manual

PreserveTech™

Universal Raised Toilet Seat

Asiento Elevado Universal

para Inodoro PreserveTech™

Siège de Toilette Rehaussé

Universel PreserveTech™

Item # RTL12C002-WH

www.drivemedical.com

VER.A.12.20

OSMUNDA Medical Technology Service GmbH

Georg-Sigismund-von Oppen-Weg 15, 14476

Postdam, Germany

getting started

Step 1: Determine the height needed

Measure the length of

your lower back leg

Add 2"

19" + 2" = 21"

Measure the height of

your toilet bowl

Be sure not to include

the seat and lid

Calculate the difference

21" – 17" = 4"

You need a 4" raised

toilet seat!

19"

17"

Step 2: Determine the shape of your toilet

Toilets come in 2 different shapes

- Standard Round

- Elongated

To ensure you are correctly measuring your toilet bowl, measure from the center

front to the center of the mounting holes.

17"

18.5"

Standard Round Elongated

parts

A. Armrest (2)

B. Armrest holder

C. Locking mechanism for adjustable holder

D. Body

E. Recessed grip (in the lid)

F. Lid

G. Fixing screw (2)

H. Knurled nuts (2)

I. Rear support

J. Adjustable holders (2)

K. Supports (4)

L. Hygiene openings

WEIGHT CAPACITY: 350 LB / 158 KG

assembly

1. Remove existing toilet seat and lid assembly

3. Insert adjustable holders (J) onto

the rear support (I) at the desired

seat height.

6"/ 15.2cm

4"/ 10.1cm

2"/ 5cm

2. Place rear support (I) on toilet bowl

and attach at required length based

on your toilet shape using fixing

screws (G) and knurled nuts (H).

NOTE: There are letter indicators on the

rear support (I) marked “E” for Elongated

and “S” for Standard to assist with which

hole to thread the fixing screws (G)

through for your toilet shape.

4. To set the height in the front, insert the

supports (K1) in the corresponding

opening until they click into place.

NOTE: Be sure that the supports (K1) are

inserted at the same height on the right

and left side. The supports (K1) can be

set lower than the rear support (I).

5. Insert supports (K2) in the corresponding

openings until they click into place.

6"/ 15.2cm

4"/ 10.1cm

2"/ 5cm

6. Push armrests (A) into the

armrest holders (B). If not

using armrests, skip this step.

7. Slide body (D) of raised toilet

seat onto adjustable holders (J)

until you hear a click into place.

height adjustment

The raised toilet seat can be adjusted using the adjustable holders (J) for an elevation

of 2"(5cm) 4"(10.1cm) and 6"(15.2cm). If you wish to change the seat height, follow

these steps:

1. Push the locking tabs on the right and left under the armrests (A) and pull the

body (D) of the raised toilet seat up.

2. Pull out the adjustable holders (J) and set the desired height. To do this insert

the rear support (I) into the corresponding hole in the adjustment holder (J).

Be sure that the adjustable holders (J) are set at the same height on both the left

and right sides.

3. To adjust the height in the front, insert the supports (K) into the corresponding

openings until you hear them click into place. Be sure that the supports (K) are

set at the same height on both the left and right sides.

NOTE: The supports (K) can be set lower than the rear support (I).

4. Set the body (D) of the raised toilet seat back onto the rear support (I).

lid assembly

The lid is preassembled at the time of delivery but can be replaced if necessary. To

do this, turn the body of the raised toilet seat around and press the lid clips at the

same time. The lid can then be taken out of the holders.

additional precautions

• Inspect all parts for shipping damage before assembly. If there is shipping damage

- DO NOT USE. Contact dealer/carrier for further instructions.

• Check for secure fit routinely before using product. User’s weight should be

centered over toilet seat, not too far forward or too far to one side, as unit

may tip.

• Use the arm supports only for assistance. DO NOT attempt to use the arms to

support full body weight.

• The lid must not be used as a backrest in the opened position.

• The lid must not bear a load when closed.

maintenance

Drive recommends periodic visual inspection of this product by the user, to ensure that

all parts and hardware are secure, that components are in good working order and not

worn, torn, frayed, loose, or rusted and that there are no obstructions or impediments

to normal, safe operation. If any part or mechanism appears to be unsafe or

compromised, do not use the product. If you experience problems, please contact the

provider that sold you the product or visit www.drivemedical.com/help for more info.

NOTE: To maintain the beauty of the original finish, clean with mild soap and rinse with

warm water. Wipe bath seat dry after each use.

Drive PreserveTech™ products are manufactured with an antimicrobial* agent that helps

to minimize the growth of stain and odor-causing bacteria and mold on treated surfaces.

*Antimicrobial properties are built in to protect the products. These products do not

protect users or others against bacteria, viruses, germs or other disease organisms.

PreserveTech

Stays Cleaner •Lasts Longer

lifetime limited warranty

Your Drive brand product is warranted to be free of defects in materials and

workmanship for the lifetime of the original consumer purchaser.

This device was built to exacting standards and carefully inspected prior to shipment.

This Lifetime Limited Warranty is an expression of our confidence in the materials

and workmanship of our products and our assurance to the consumer of years of

dependable service.

This warranty does not cover device failure due to owner misuse or negligence, or

normal wear and tear. The warranty does not extend to non-durable components,

such as rubber accessories, casters, and grips, which are subject to normal wear and

need periodic replacement.

If you have a question about your Drive device or this warranty, please contact an

authorized Drive dealer.

Drive is a trademark of Medical Depot, Inc.

Port Washington N.Y. 11050 USA Made in China

para comenzar

Paso 1: Determina la altura necesaria

Mida la longitud de la

parte inferior trasera de

su pierna.

Agregue 2” = 19” + 2” = 21”

Mida la altura de la taza

del inodoro.

No incluya el asiento

ni la tapa.

Calcule la diferencia

21” – 17” = 4”.

Usted necesita un asiento

elevado de 4”.

19"

17"

Paso 2: Determina la forma de tu inodoro

Los inodoros vienen en 2 formas diferentes

- Redondo estándar

- Alargado

Para asegurarse de medir correctamente la taza del inodoro, mida desde el centro

de la parte delantera hasta el centro entre los orificios de montaje.

17"

18.5"

Redondo estándar Alargado

partes

A. Apoyabrazos (2)

B. Sostén de apoyabrazos

C. Mecanismo de traba para el sostén ajustable

D. Cuerpo

E. Tirador encastrado (en la tapa)

F. Tapa

G. Tornillo de sujeción (2)

H. Tuerca estriada (2)

I. Soporte trasero

J. Sostén ajustable (2)

K. Soportes (4)

L. Aberturas para la higiene

CAPACIDAD DE PESO: 350 LB / 158 KG

armado

1. Retire el asiento y la tapa del inodoro existentes

3. Inserte los sostenes ajustables (J) en

el soporte trasero (I) a la altura

deseada para el asiento.

6"/ 15.2cm

4"/ 10.1cm

2"/ 5cm

2. Coloque el soporte trasero (I) sobre

la taza del inodoro y fíjelo a la longitud

deseada, según la forma del inodoro,

usando los tornillos de sujeción (G) y

las tuercas estriadas (H).

NOTA: Hay letras indicadoras en el

soporte trasero (I) que dicen “E” para

la forma Alargada y “S” para la forma

estándar para que sepa en qué orificio

enroscar los tornillos de sujeción (G)

según la forma del inodoro.

4. Para establecer la altura en la parte

delantera, inserte los soportes (K1) en el

orificio correspondiente hasta escuchar el

clic que indica que calzaron en su lugar.

NOTA: Asegúrese de que los soportes (K1)

estén insertados a la misma altura del lado

derecho e izquierdo. Los soportes (K1)

pueden fijarse más abajo que el soporte

trasero (I).

5. Inserte los soportes (K2) en los orificios

correspondientes hasta escuchar el clic

que indica que calzaron en su lugar.

6"/ 15.2cm

4"/ 10.1cm

2"/ 5cm

Table of contents

Languages:

Popular Mobility Aid manuals by other brands

Alber

Alber Scalamobil iQ operating instructions

Ferno

Ferno CCT-PX user manual

HEPRO

HEPRO Gripo user manual

Otto Bock

Otto Bock Pheon 3R62 Instructions for use

NRS Healthcare

NRS Healthcare M11090 User instructions

Medline

Medline MDS86835DSHEC User Instructions & Warranty

Guldmann

Guldmann Twin Turner II user manual

Gate

Gate Balder operating instructions

Decon wheel

Decon wheel TNS Notos Assembly instructions

ExoAtlet

ExoAtlet ExoAtlet-II user manual

Invacare

Invacare Storm Series parts catalog

Rhythm Healthcare

Rhythm Healthcare B3800F manual

AMF-BRUNS

AMF-BRUNS PROTEKTOR installation manual

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare OTTER Instructions for use

Rhythm Healthcare

Rhythm Healthcare C500U Assembly and Fitting Instructions

Lumex

Lumex RJ4200A manual

Rebotec

Rebotec Jumbo user manual

Rehaforum MEDICAL

Rehaforum MEDICAL PR50548 manual