Drawell DW-T960 User manual

www.drawell.com.cn

Product Specifications for PCR

Suitable for T960

Please read the manual before installation and operation

Drawell International Technology Limited

Chongqing Drawell Instrument CO,.Ltd

Add:Suite 2705,Building No.12,Shiyou Road No.1,Yuzhong District,

Chongqing,China

Tel: 0086-023-63268643

Shanghai Drawell Scientific Instrument Co.,Ltd

Add : Suite 1117,Lane561 XiuChuan Rd.,PuDong New Area,Shanghai,China

Web : www.drawell.com.cn

Email : sales05@drawell.com.cn

www.drawell.com.cn

Contents

2 Chapter 1 Important Notice

2 1. Unpacking check

2 2. Safety notice

5 Chapter 2 Basic Functions

5 1. Structure of T960

6 2. Lid-opening angle

6 3. Heat Lid positions

7 4. Module

10 5. Touch Screen

10 6. Working condition and performance indicator

12 Chapter 3 Instructions

12 1. Program installation

12 2. Startup interface

13 3. Files

13 4. Setting

14 5. Heat Lid

14 6. Gradient

15 7. Apply

16 8. Log

16 9. System

17 10. Help

18 Chapter 4 Programming

18 1. Create files

21 2. Open files

23 Appendix A Maintenance and troubleshooting

23 1. Maintenance

23 2. Troubleshooting

25 Appendix B Instrument Guarantee

25 1. Guarantee Content

25 2. Guarantee Scope

www.drawell.com.cn

Notice: If you find the package seriously broken or the instrument

obviously damaged after receiving the instrument, please keep the

original package and contact your distributor as soon as possible so

we can change a new one for you.

Please read the manual carefully before operating the instrument,

the wrong operation may be hazardous to the operator or the

instruments itself.

Chapter 1 Important Notice

1 Unpacking check

Upon receiving B960 gradient thermal cycler, please unpack the box to confirm if

the following items are contained or not:

① One thermal cycler (including one sample block)

② One power cord

③ One user manual

④ One warranty card

5One QC certificate

6One packing list

7One instruments test report

8Two spare fuses (AC250V/10A)

9Other optional items according to the contract

10 Mouse, Disk

If the contents do not comply with the packing list, please contact the distributor as

soon as possible.

Safety notice

www.drawell.com.cn

① Operating safety

The power cord for the instrument should be grounded reliably. The instrument

adopts three-core grounding plug, and should be connected with appropriate

power socket. Before connecting to the power, you must make sure that the

voltage and power load of the socket is in accordance with the capacity on the

instrument's nameplate.

Please change the power cord with the same type if the skin of the cord is found to

be broken. Nothing is allowed to be place on the power cord and the cord shall

not be placed in the area that may be easy approaching by people. Be sure to hold

the plug tightly while inserting, pulling of the cord directly is forbidden.

While the instrument is in operation, the sample plate block and the heat lid will

produce the high temperature, so no part of human body is allowed to touch the

metal block or the heat lid while the instrument is in operation in case of any

scalding.

For the good ventilation, no articles are allowed to be placed within 30cm around

the instrument.

②Maintenance Safety

The block and the heat lid of the instrument need regular cleaning to guarantee

the precision of the experiment. Before cleaning, the sample plate block is suggested

to be taken out for soft scrubbing by the clean soft cloth stained with the pure alcohol

in appropriate amount. No corrosive cleaning agent is allowed for use and dripping

the cleaning agent into the taper hole is forbidden in case of any damage to the

instrument. And the sample plate block should be put back into the instrument after

cleaning.

Please cut off the power at once and stop the experiment and then immediately

contact the distributor or the professional maintenance personnel in case of any

occurrence of the following situations:

Any reagent, rain water or other liquid enters into the instrument.

The instrument falls from a high place or the instrument shell is damaged.

The operating instrument produces the abnormal noise or the pungent odor.

The features of the instrument change apparently, such as failures of startup or

shutdown or failure to run user program, etc.

www.drawell.com.cn

Notice: For your personal safety and the normal operation of the

instrument, please do not disassemble the instrument by yourself.

Any such behavior may endanger your safety and deprive your

guarantee right of the instrument.

③Trial time tips

The above figure indicates that the remaining trial time is 91 hours.

④ How to get the encryption key after the trial period

expires

When the trial period is about to end, please contact the merchant or

manufacturer to get the encryption key, to facilitate you to continue to use.

www.drawell.com.cn

⑶

⑴

⑷

⑵

⑸

⑺

⑻

⑹

⒂

⒃

⒄

⑼ ⑽ ⑾⑿⒀⒁

⒅

⒇

⒆

Chapter 2 Basic Functions

2.1

Structure of T960

(1) Ventilation window (2) Base (3) Foot rest (4) Ventilation window (5) Upper lid (6)LCD

panel (7)LCD Screen (8)Aluminum panel (9) Power switch (10) Power socket (11) Fuse

socket (12) Network interface (13) USB interface (14) JTEG interface (15) Shell (16)

Ventilation window (17) Long label (18) Lid wrench (19) Block selecting knob (20) Block

selecting indicator

www.drawell.com.cn

Pull the wrench to

push the lid

backward

Stop at any angle

according to

requirements

Notice: According to the instrument characteristics, the open angle scope

between upper lid and the shell is 0°~ 90°, please keep it within the scope to

prevent any damage to the instrument.

2.2

Lid-opening angle

This type of instrument takes a leading role in adopting the hinge joint

technology, enabling the upper lid of the instrument to stay at any angle according

to requirement and solving such problems brought by the traditional method of

relying on spring elasticity to open the lid as unreliability, instability, large inertia and

short life etc.

As indicated in the above two figures, when the wrench is raised the buckle will be

released, and then the user can set the upper lid at any angle according to their

requirement. Humanistic structure endows the product more beautiful and practical

characteristics, and guarantees the safety and convenient operation.

2.3

Heat Lid positions

Frequently, experiments need different reaction tubes, that is, use different blocks

to match the tubes. The design of the heat lid gear positions realize the heat lid to

match different sample plate blocks just by turning the knob to the appropriate

position.

www.drawell.com.cn

Notice: According to characteristics of the instrument, the turning range of the

switch is between 0.5 to 384, do not try to turn the switch out of this range.

Block components

As the above figures indicate that the mark of 0.5, 0.2,384 (clockwise) on the panel

respectively corresponds to the gear position of tube 0.5ml, 0.2ml and 384sample plate

blocks. If you need the 0.2ml tube for experiment, you only need to change the block

with 0.2ml block (See

2.4 Module

for details), then switch the gear to the mark of 0.2,

and then you can start your experiment. The design abandons the traditional practice

of changing heat lid/or even instrument.

2.4

Module

For the need of users to use tubes of different specifications for experiment in the

same instrument, and for the convenience of users to change relevant parts directly

and effectively, the instrument adopts the portable design with auto-lock function to

make the instrument meet the experiments of different tubes on the condition of

changing least parts, which fully reflects the humanistic design of the instrument.

The above figure indicates that the integrated block parts design of the instrument

greatly improves operational convenience no matter in installation or replacement,

and the overall dimension, assembly process and installation method of all the blocks

of all specifications are the same (The block parts of different specifications differ with

blocks corresponding to tubes of different specifications). And this guarantees that

users can change or install the block in a fast and high-efficient way only by choosing

www.drawell.com.cn

the block with specification needed.

Figure 1 show how to change the block unit. When changing the block, the user

shall pull the handle upward, when the handle and the shell are in a vertical state, the

block will be unlocked, and then the user can easily take out the block part by pulling

the handle vertically. Figure 2 show how to insert the block, when the user confirm the

block part of certain specifications needed, the user only needs to hold the block’s

handle. Vertically insert the block in position, then put the handle down to complete

the operation.

Step 1: Move the handle to the state vertical to the shell to make the block parts

unlocked. (Figure 3)

Step 2: Move the block parts upward slightly, and lay it in a safe place after the block

parts are completely off the shell. (Figure 4)

www.drawell.com.cn

Notice: Since all the lines of the instrument are connected by connectors, the

user shall use proportional strength while taking out or installing block parts,

and use skilled strength to shake them left and right. No tough strength is

allowed in case of any damage to connectors.

Step 3: Choose the block parts of specifications needed and gently put them into the

shell vertically.

Step 4: After the block parts completely contact the shell, press back the handle down.

(Figure 6)

Step 5: When the block parts and the shell will lock tight. Till now the replacement of

block parts is over. (Figure 7)

The integrated block parts coupled with the intelligent block auto-lock mechanism

enable the user to conduct replacement in a faster and safer way. In addition, the

option of block parts of various specifications enable the users to conduct experiments

with tubes of different specifications in one set of instrument.

Table of contents

Other Drawell Laboratory Equipment manuals

Drawell

Drawell Gentier 96E User manual

Drawell

Drawell LBI-175A-N User manual

Drawell

Drawell DW-280B 18L User manual

Drawell

Drawell DW-FD Sereries User manual

Drawell

Drawell CIC-D100 User manual

Drawell

Drawell DW-280A User manual

Drawell

Drawell ZNHW-500ML User manual

Drawell

Drawell GL10-MC Installation manual

Drawell

Drawell DW-GI Series User manual

Drawell

Drawell TDD4-MC User manual

Drawell

Drawell DW-ATN-300 User manual

Drawell

Drawell DW-280D User manual

Drawell

Drawell TANK User manual

Drawell

Drawell DW-TDZ5-WS Installation manual

Drawell

Drawell B Series User manual

Popular Laboratory Equipment manuals by other brands

Qiagen

Qiagen DML 3000 user manual

Queensgate

Queensgate NANOSCAN OP400 Quick start instructions

Conviron

Conviron GEN1000-GE Operator's manual

Parr Instrument

Parr Instrument 4560 Operating instructions manual

IKA

IKA IC control operating instructions

Integra

Integra DOSE IT operating instructions

Agilent Technologies

Agilent Technologies 5800 ICP-OES user guide

Endress+Hauser

Endress+Hauser Cleanfit CPA875 operating instructions

NI PXI-5422 CALIBRATION PROCEDURE

Collomix

Collomix Aqix operating instructions

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series operating manual

Ocean Insight

Ocean Insight FLAME-NIR+ Installation and operation manual

Parker

Parker ALIGN-MG-NA Installation, operation and maintenance manual

BD 644787 user guide

DENTAURUM

DENTAURUM Compact Megaplus Instructions for use

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 instruction manual

VWR

VWR SAS Super IAQ instruction manual

illumina

illumina MiSeqDx reference guide