Dräger Caleo Configuration guide

Other manuals for caleo

3

Other Dräger Accessories manuals

Dräger

Dräger Incubator 8000 IC User manual

Dräger

Dräger SE Ex PR M User manual

Dräger

Dräger DragerSensor IR User manual

Dräger

Dräger 68 09 381 User manual

Dräger

Dräger Polytron 8200 User manual

Dräger

Dräger PEX 3000 User manual

Dräger

Dräger X-am 3500 User manual

Dräger

Dräger PID 5000 User manual

Dräger

Dräger Incubator 8000 IC Parts list manual

Dräger

Dräger Polytron SE Ex PR NPT1 DD User manual

Dräger

Dräger X-pid 800 Series User manual

Dräger

Dräger Incubator 8000 IC User manual

Dräger

Dräger Polytron SE Ex PR M2 DD User manual

Dräger

Dräger DOL 53 Manual

Dräger

Dräger Polytron 8100 User manual

Dräger

Dräger Isolette 8000 plus User manual

Popular Accessories manuals by other brands

Hillco

Hillco 2810 Operator's manual

Siemens

Siemens QSA2700D Basic documentation

Contours

Contours ZY024 manual

Saivod

Saivod VS621 manual

Virtuox

Virtuox VirtuCLEAN 2.0 user manual

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS user manual

Z-Wave

Z-Wave HSD-200Z user manual

turck

turck FMX-IM-2UPLI63FX quick start guide

Decagon Devices

Decagon Devices 10HS manual

UPPAbaby

UPPAbaby Cup Holder user manual

Elko

Elko SmartSensor Leakage Wireless manual

Grizzly

Grizzly H8371 instructions

Panasonic

Panasonic HG-T Series user manual

IFM Electronic

IFM Electronic Efector 250 Series Brief instructions

DigiDesign

DigiDesign 888/24 I/O installation guide

PROZIS

PROZIS QUAY user manual

patagonia

patagonia PSI Vest user manual

SFC Energy

SFC Energy EFOY GO! manual

Cleaning the Caleo Incubator

1. Disinfecting/ Cleaning/ Sterilzing

a) done after each patient change

b) see Operator’s Manual for list of approved cleaning disinfectants

2. Check air filter…. Tilt unit for easy access:

3. View of filter area:

Part number MX 17 015

4. Place Caleo in horizontal position using tilt controls:

5. Select Cleaning Mode from the Menu and start the Cleaning Mode.

6. ALLOW CALEO TO COOL DOWN after self cleaning (one hour)

7. Remove canopy… Grasp the handles on the sides of the canopy with both hands.

Lifting the canopy horizontally

8. Wipe surfaces with approved disinfectant

9. Open the side doors:

10. Open all flaps same way. Remove any and all visible soiling, using approved

disinfectant.

11. Remove all grommets:

12. Clean the grommets with a disinfecting solution.

13. Remove the mattress from inside the incubator:

14. Wipe mattress down with approved cleaner and check for holes or punctures in

material.

15. Remove the mattress tray very CAREFULLY so as not to damage the sensor unit

below:

16. Remove XRAY tray….using recessed handle. Pull out XRAY tray as far as it

will go. Then tilt the drawer upwards and pull out completely:

17. Wipe down all surfaces with approved disinfectant

18. The remaining tray is also removed:

19. Remove that remaining piece by pressing the two catches inwards and lifting up

at the same time:

20. Wipe down surfaces

21. The impeller is now in plain view , remove ( PLEASE note: maybe HOT!)

22. Remove any soiling and wipe down with approved cleaning material

23. After drying replace impeller.

24. Turn over trough ( part removed to expose fan impeller)

25. Wipe down with approved cleaning solution

26. Base Frame and body. Remove any visible soiling with cloth and detergent

approved for use on Caleo.

27. Control Panel

28. Wipe –disinfect the surfaces then wipe clean with DAMP cloth and rub dry

29. DO NOT ALLOW MOISTURE TO ENTER THE CONTROL PANEL. DO NOT

DISINFECT THE CONTROL PANEL BY IMMERSION OR SPRAYING

________________________________________________________________________

Summary of the parts to be cleaned:

________________________________________________________________________

CAUTION ON CLEANING AGENTS: Clean with a “surface disinfectant on the basis

of aldehydes or quarternary ammonium compounds.” See Op Manual pg. 110 for more

details on cleaning.