Dnake S617 User manual
User Manual
———
DNAKE S617
REMARK
Please follow the user manual for correct installation and testing. If there is any
doubt please call our tech-supporting and customer center.
Our company applies ourselves to reformation and innovation of our products. No
extra notice for any change. The illustration shown here is only for reference. If
there is any difference, please take the actual product as the standard.
The product and batteries must be handled separately from household waste.
When the product reaches the end of service life and needs to be discarded,
please contact the local administrative department and put it in the designated
collection points in order to avoid the damage to the environment and human
health caused by any disposal. We encourage recycling and reusing the material
resources.
CATALOG
PRODUCT FEATURE ............................................1
TECHNICAL PARAMETER ....................................1
PACKAGE CONTENT ............................................2
OVERVIEW ............................................................3
BASIC OPERATION ...............................................4
DEVICE SETTING ..................................................5
WEB SETTING .....................................................10
SYSTEM DIAGRAM .............................................26
DEVICE WIRING ..................................................27
INSTALLATION ....................................................30
TROUBLESHOOTING ..........................................35
SAFETY INSTRUCTION.......................................36
1
PRODUCT FEATURE
1. 8-inch IPS LCD capacitive touch screen
2. 3 output relays for door locks
3. 120° wide-angle 2MP HD camera with automatic lighting
4. Support WDR technology to lighten the dark areas and darken the overexposed parts of the
image
5. Support 10,000 faces, and 100,000 cards
6. Tamper alarm
TECHNICAL PARAMETER
Power Supply: PoE+ (802.3at) or DC 12V/3A
Standby Power: 8 W
Rated Power: 16 W
Resolution: 1280 x 800
Working Temperature: -40℃to +55℃
Storage Temperature: -40℃to +70℃
Working Humidity: 10% to 90% (non-condensing)
2
PACKAGE CONTENT
MODEL: S617 (Surface Mounting)
S617 Screw Screw Fixing Seat Wrench Screw Interface Plate
Cable Locking
Plate
Hang Rope
Rear Cover
Sealing Plug
Rain Hood
(Optional)
Quick Start Guide
MODEL: S617 (Flush Mounting)
S617 Screw Screw Fixing Seat Wrech Screw Interface Plate
Cable Locking
Plate
Hang Rope
Rear Cover Sealing Plug
Rain Hood
(Optional)
3
OVERVIEW
4
BASIC OPERATION
1. Call and Monitor
1.1. Call Indoor Monitor
Go to the “CALL” page, press room numbers on Door Station to call Indoor
Monitor. During the call, press the hang up icon on Door Station to end the call. If
the call fails or Indoor Monitor is busy, Door Station will make a beep sound.
1.2. Monitor Door Station
Click Monitor icon on Indoor Monitor’s homepage to monitor Door Station.
2. Contacts
Go to “CONTACTS” to enter contacts list. You can dial any residents in this list.
3. Unlock
Go to PIN page, press PIN Code and lock icon to unlock.
4. Concierge
Go the homepage, press concierge button to call Master Station.
5. Facial Recognition
Go to the “FACE” page to wake up face scan. Facial recognition should be
enabled beforehand.
5
DEVICE SETTING
Connect Door Station and PC to a network switch in the same LAN. You can
enter the admin settings of Door Station by pressing PIN and entering default
password (123456). This is where you can configure the device.
1. Device Settings
Numbers here are basic settings for making a call to Indoor Monitor. For Door
Station, the building and unit number should be the same as those in Indoor
Monitor. For Villa Station with one button, the building, unit, and room number
should be the same as those in Indoor Monitor.
The Device No. here is to distinguish different Door Stations when more than one
Door Station in one building.
6
Building:
Number of the building (Building range: 1-999);
Unit:
Number of the unit (Unit range: 1-99);
Device No.:
Number of the Index (Unit range: 1-9);
System pwd:
Administrator password of the Device (Default
123456);
Mode:
Mode for apt., wall or villa (Unit and Gate)
Language:
16 languages supported (简体中文, English, 繁體
中文, תי ִרב ִﬠ, Deutsch, Español, Türk, Tiếng Việt,
Nederlands, Português, Polski, Русский, ﻲﺑرﻋ,
Français, Italiano, slovenský);
Volume:
Volume of System can be set from 1 to 6;
Resolution:
4 resolutions supported (320 × 240, 640 × 480,
1280 × 720, 1920 x 1080);
2. Network Settings
The device network can be set to either DHCP or a static IP address. CMS
parameters should be configured here when you try to register this device to
CMS.
Table of contents
