Dji MAVIC PRO User manual

Quick Start Guide

Kurzanleitung

Guía de inicio rápido

Guide de démarrage rapide

Guida di avvio rapido

Snelstartgids

Guia de Início Rápido

Краткое руководство пользователя

V1.2

MAVIC PRO

Quick Start Guide 2

Kurzanleitung 12

Guía de inicio rápido 22

Guide de démarrage rapide 32

Guida di avvio rapido 42

Snelstartgids 52

Guia de Início Rápido 62

Краткое руководство пользователя 72

Contents

Aircraft

The DJITM MAVICTM Pro is DJI's smallest ying camera, featuring a fully stabilized

camera, Intelligent Flight Modes and Obstacle Avoidance inside a revolutionary

folding design. It captures 4K videos and 12 megapixel photos, and is capable

of both ActiveTrackTM and TapFlyTM making complex shots effortless.

Mavic Pro boasts a maximum ight speed of 40 mph (65 kph) and a maximum

ight time of 27 minutes*.

1. Gimbal and Camera

2. Downward Vision System

3. Forward Vision System**

4. Micro USB Port

5. Motors

6. Front LEDs

7. Propellers

8. Antennas

9. Link Button

10. Linking Status Indicator

11. Camera Micro SD Card Slot

12. Control Mode Switch

13. Intelligent Flight Battery

14. Battery Level LEDs

15. Power Button

16. Aircraft Status Indicator

* Maximum ight time was tested in 0 wind at a consistent 15.5 mph (25 kph). This value should be

taken for reference only.

** The Forward Vision System is affected by surrounding conditions. Read the Disclaimer and Safety

Guidelines and watch the tutorial in the DJI GOTM 4 app or on the Ofcial DJI website to learn more.

http://www.dji.com/mavic

11 12

13 14

16 17

Remote Controller

Built into the Remote Controller is DJI's latest long-range transmission technology

OCUSYNCTM, offering a maximum transmission range of 4.3 mi (7 km). An on-

board LCD screen keeps you updated on aircraft data, and video from the

aircraft to the DJI GO 4 app on your mobile device at up to 1080p at close range,

and 720p at longer ranges. The Mavic Pro can also be own by phone only.

Maximum run-time: 2.5 hours*

1. LCD Screen

2. 5D Button

3. Control Sticks

4. Antennas

5. Power Button

6. Flight Mode Switch

7. Mobile Device Clamp

8. USB Port

9. Flight Pause Button

10. RTH Button

Folded

11. Gimbal Dial

12. Camera Settings Dial

13. Record Button

14. Shutter Button

15. Power Port (Micro USB)

16. C1 Button (customizable)

17. C2 Button (customizable)

* The remote controller is able to reach its maximum transmission distance (FCC) in a wide open

area with no Electro-Magnetic Interference, and at an altitude of about 400 feet (120 meters).

The maximum run-time is tested under laboratory environment, only for your reference.

1. Download the DJI GO 4 App and Watch

the Tutorial Videos

2. Check the Battery Levels

Search for ‘DJI GO 4' on the App Store or Google Play, or scan the QR

code to download the app on your mobile device. Watch the tutorial videos

at www.dji.com or in the DJI GO 4 App.

DJI GO 4 supports iOS 9.0 (or later) or Android 4.4 (or later).

Press once to check the battery

level. Press once, then again

and hold to turn on/off.

Press once to check the battery level

on LCD screen. Press once, then

again and hold to turn on/off the

remote controller.

Battery Level: 100%

Low Battery Level High

DJI GO 4 app and more information

3. Charge the Batteries

Remove Intelligent Flight Battery

Charge Time:

~1 hour 20 minutes

Charge Time:

~2 hours

Power Outlet

100 - 240V

4. Prepare the Remote Controller

Unfold the antennas and

the mobile device clamp.

Lightning connector cable (Connected)

and Standard Micro USB connector

cable included. Use as appropriate.

USB Type-C connector cable is

included. Optional Reverse Micro USB

connector cable is available.

Choose an appropriate RC cable. Do not twist the RC cable.

The RC cable slider must be replaced if using a USB Type-C RC cable. Refer to

the User Manual for RC Cable connection.

Place one end of the RC

cable to the end of the slot .

Strong Weak

Internet

Use your DJI account to activate the aircraft. Activation requires an internet

connection.

5. Prepare the Aircraft

6. Prepare for Takeoff

Remove the gimbal

clamp from the

camera

Marked

Power on the

remote controller

Power on the aircraft Launch the DJI GO 4 app

Unfold the front arms

and the propellers

Unfold the rear arms

and the propellers Unfolded

Unfold the front arms and the propellers before the rear ones. All arms and

propellers must be unfolded before takeoff.

The gimbal cover is used to protect the gimbal. Remove it when necessary.

The Mavic Pro can be controlled using the Remote Controller or Virtual Joysticks.

Select control modes by toggling the Control Mode Switch. Only toggle this switch

when the aircraft is powered off.

DJI GO 4

App

Unmarked

Match propellers to motors Press the propeller

down rmly and rotate

in the lock direction

7. Flight

The default ight control is known as Mode 2. The left stick controls the

aircraft's altitude and heading, while the right stick controls its forward,

backward, left and right movements. The gimbal dial controls the

camera's tilt.

Left Stick

Right Stick

The motors can only be stopped mid-ight when the ight controller detects critical

error.

Before taking off, make sure the Aircraft

Status Bar in the DJI GO 4 app or on

the Remote Controller LCD screen

displays 'Ready to Go'.

Ready to Go (GPS)

Combination stick

command to start/stop

the motors.

Left stick up (slowly)

to take off

Left stick down (slowly) until

you touch the ground

Hold a few seconds to stop

the motors

Controlling ight with Virtual Joysticks on your mobile device via Wi-Fi

1. Toggle the Control Mode Switch to turn on Wi-Fi

2. Power on the aircraft

3. Launch the DJI GO 4 app and tap the icon on the top right of your screen,

then scan the Wi-Fi QR Code on the front arm to start connection

4. Tap Auto Takeoff

5. Fly the aircraft with touch control

Turn on your mobile device's Wi-Fi and enter the Wi-Fi password shown on the front

arm to connect to the Mavic network if for any reason you cannot scan the QR code.

When using Wi-Fi in a wide open area with no Electro-Magnetic Interference,

transmission distance is approximately 262 ft (80 m) at an altitude of 164 ft (50 m).

The Wi-Fi frequency of your mobile device can be set to 2.4 Ghz or 5 Ghz. Set

your Wi-Fi to 5 Ghz for less interference. Once connected to the Mavic Pro, you

can change your Wi-Fi password or reset your Wi-Fi connection. (Refer to the User

Manual for more information)

Watch the tutorial in the DJI GO 4 app or on the Ofcial DJI website to learn more.

Always set an appropriate RTH altitude before takeoff. When the aircraft is returning

to the Home Point, you should guide it with the control sticks.

In the DJI GO 4 App

Mavic_XXX

WIFI RC DJI GO 4

App

TapFly

Auto Landing Return-to-Home (RTH)

Normal

ActiveTrack

Auto Takeoff

Other manuals for MAVIC PRO

This manual suits for next models

Table of contents

Languages:

Popular Quadcopter manuals by other brands

Autel Robotics

Autel Robotics EVO II Dual 640T quick guide

Carson

Carson X4 NANO instruction manual

Attop

Attop W80 Instructions for use

Alias

Alias 6608 owner's manual

Reely

Reely Drone Copter 2-in-1 operating instructions

Hubsan

Hubsan FPV X4 H107D instruction manual

Falcon

Falcon S2-210 quick start guide

Kaiser Baas

Kaiser Baas KBA15007 user guide

Denver Electronics

Denver Electronics DCH-261 instructions

Craig

Craig INTERCEPTOR owner's manual

Odyssey

Odyssey TURBO RUNNER manual

IMAGINARIUM

IMAGINARIUM droni stream instructions

Hubsan

Hubsan X4 Pro FPV instruction manual

AR.Drone

AR.Drone Parrot VSM user guide

Walkera

Walkera QR X900 quick start guide

HobbyZone

HobbyZone Zugo instruction manual

Ares

Ares RECON FPV owner's manual

Skycat

Skycat XS user manual

dji MAVIC PRO User manual

Popular Quadcopter manuals by other brands