dji OSMO User manual
Quick Start Guide
快速入门指南
快速入門指南
クイックスタートガイド
퀵 스타트 가이드
Kurzanleitung
Guía de inicio rápido
Guide de démarrage rapide
Guida di avvio rapido
Snelstartgids
Guia de início rápido
Краткое руководство пользователя
OSMO MOBILE
V1.0
4
EN
EN
Osmo Mobile
The OSMOTM Mobile is an advanced gimbal that turns
your mobile phone into a smart motion camera by
stabilizing it while in motion. It is easy to use, and powerful
features such as ActiveTrack and Motion Timelapse are
available through the DJI GO app.
1 Mobile Phone Holder
2 Pan Motor
3 Camera Status LED
4 Joystick
5 Shutter Button
6 Record Button
7 Power Switch
8 System Status LED
9 Tilt Motor
10 Adjustable Arm
11 Mobile Phone
Detection Sensor
12 Balance
Adjustment Knob
13 Roll Motor
13
12
9
1
2
3
4
5
8
7
6
10
11
5
EN
EN
14 Holder Lock Knob
15 Charging/Upgrade Port
16 Trigger
17 DJI Rosette Mount
18 Lanyard Hole
19 Battery Cover
14
17
19
15
16
18
※Mobile Phone is not included.
6
EN
EN
1. Install the DJI GO App
2. Prepare the Battery
Search for ‘DJI GO’ on the App Store or Google Play,
and install the app on your mobile phone.
Fully charge the battery before using it for the rst
time to activate it, otherwise the gimbal will not work.
Insert the battery as shown.
DJI GO supports iOS 8.0 (or later) and Android 4.4
(or later).
Battery Level
High Low
To charge the Osmo Mobile, connect the
USB adapter (not included) to the charging
port using the provided power cable.
The battery is fully charged when the
system status LED become solid green.
USB Adapter Charging time : 3 hours
( when charging at 1 A)
Maximum Supported USB Charging
Current: 2.1 A
Max Run-time: 4.5 hours
Only use the Power Cable with the Osmo Mobile.
Damage may occur if the Power Cable is attached to
any other device's 3.5 mm port.
7
EN
EN
3. Mount and Balance the
Mobile Phone
With the Osmo Mobile powered off, loosen the
Holder Lock Knob, place the mobile phone in the
mobile phone holder and tighten the knob to secure
its position.
Do not power on the Osmo Mobile without a mobile
phone. The Osmo Mobile will not work if no device is
detected by the Mobile Phone Detection Sensor.
It is important to balance the mobile phone in order to
achieve optimal performance. The Osmo Mobile should
only be balanced when powered off.
1
2
1
2
The system is balanced if the mobile phone remains
level when released, balanced only by the gimbal.
If the roll axis tilts to
the left, pull out the
arm until the roll axis
remains level.
If the roll axis tilts to
the right, adjust the
mobile phone to the
left until the roll axis
levels out.
Left Right
8
EN
EN
4. Connect to the DJI GO App
Enable Bluetooth on your mobile phone
To Power On: Pull down and hold for 1.5 s
Pull down again > Sleep
Pull down and hold for 1.5 s > Power Off
Launch the DJI GO app and then follow
the instructions to connect to the Osmo
Mobile.
Activate the Osmo Mobile when using it for the rst
time. This requires an internet connection.
Internet
DJI GO
App
DJI GO advanced features:
ActiveTrack: Mark an object on your screen to track it as it moves.
Motion Timelapse: To capture a moving timelapse video from
different camera positions.
5. Controls
Use the joystick to pan or
tilt the mobile phone.
Position the mobile phone
directly by hand.
Trigger
Hold down to enable Lock Mode.
Tap twice to center the mobile phone.
Tap three times to switch between the
mobile phone’s front and rear cameras.
SmoothTrack Mode is enabled automatically to smooth out jerky
movements.
Record Button: Press once to start
recording, and again to stop recording.
Shutter Button: Press once to take a photo.
Press and hold for burst capture.
9
EN
EN
Specications
Handle
Dimensions 2.4×1.9×6.4 inch
(61.8×48.2×161.5 mm)
Weight (battery included) 201 g
Gimbal
Name Zenmuse M1
Model ZM01
Dimensions 4.92×4.29×3.57 inch (Folded)
(125.06×109.15×90.98 mm)
Weight 300 g
Consumption 2.5 W
Angular Vibration Range ±0.03°
Controllable Range Pan: ±150°
Roll: ±25°
Tilt: -125° to +35°
Mechanical Range Pan: ±165°
Roll: -50° to +90°
Tilt: -140° to +50°
Max Controllable Speed 120°/s
Mobile Phone Width Range 2.31-3.34 inch (58.6-84.8 mm)
Wireless
Model Bluetooth Low Energy 4.0
Intelligent Battery
Model HB01-522365
Type LiPo
Capacity 980 mAh
Energy 10.8 Wh
Voltage 11.1 V
Charging Temperature 5° to 40° C (41° to 104° F)
Operating Temperature 0° to 40° C (32° to 104° F)
For more information, read the User Manual:
www.dji.com/product/osmo-mobile
※This content is subject to change without prior notice.
OSMOTM is a trademark of DJI.
Copyright © 2016 DJI All Rights Reserved.
Printed in China.
DJI provides various optional accessories for the Osmo Mobile. Visit
the DJI Online Store for more information: http://store.dji.com
10
CHS
CHS
认识 Osmo Mobile
OSMOTM Mobile 配备适配手机的高精度三轴云台，
通过手柄和 DJI GO App 控制云台及手机相机，可
拍摄专业级别稳定流畅的画面，并可实现智能跟拍、
移动延时摄影等高级功能。
1 手机支架
2 平移轴电机
3 相机状态指示灯
4 摇杆
5 拍照按键
6 录影按键
7 电源开关
8 系统状态指示灯
9 俯仰轴电机
10 伸缩臂
11 手机检测传感器
12 平衡调节旋钮
13 横滚轴电机
13
12
9
1
2
3
4
5
8
7
6
10
11
11
CHS
CHS
14 支架锁紧旋钮
15 充电 / 升级接口
16 模式切换按键
17 盘齿
18 挂绳孔
19 电池仓盖
※ 本产品不包含手机。
14
17
19
15
16
18
Other manuals for OSMO
10
Table of contents
Languages:
Other dji Camera Accessories manuals
dji
dji AGRAS T30 User manual
dji
dji Ronin S2 User manual
dji
dji RONIN 4D User manual
dji
dji Three-Channel Follow Focus User manual
dji
dji DJLRF User manual
dji
dji RS 2 User manual
dji
dji Force Pro User manual
dji
dji V2 Series Instruction Manual
dji
dji OSMO MOBILE 6 User manual
dji
dji OSMO MOBILE 3 User manual
Popular Camera Accessories manuals by other brands
Viltrox
Viltrox EF-NEX Mount instructions
Calumet
Calumet 7100 Series CK7114 operating instructions
Ropox
Ropox 4Single Series User manual and installation instructions
Cambo
Cambo Wide DS Digital Series Main operating instructions
Samsung
Samsung SHG-120 Specification sheet
Ryobi
Ryobi BPL-1820 Owner's operating manual
