Dimplex XLF60 User manual

7215520100R00

IMPORTANT SAFETY INFORMATION: Always read this manual rst

before attempting to install or use this replace. For your safety, always

comply with all warnings and safety instructions contained in this manual to

prevent personal injury or property damage.

To view the full line of Dimplex products, please visit

www.dimplex.com

Better solutions through innovation

Owner’s Manual

Model

XLF60

2 www.dimplex.com

Table of Contents

Always use a qualied technician or

service agency to repair this replace.

!NOTE: Procedures and techniques

that are considered important

enough to emphasize.

CAUTION: Procedures and

techniques which, if not carefully

followed, will result in damage to

the equipment.

WARNING: Procedures and

techniques which, if not carefully

followed, will expose the user to the

risk of re, serious injury, or death.

Welcome & Congratulations ...................... 3

IMPORTANT INSTRUCTIONS .....................4

Quick Reference Guide ......................... 6

Fireplace Installation ........................... 7

Framing ..............................................7

Permanent Heat Disable ................................9

Electrical ............................................10

Bathroom Use ........................................13

Final Assembly .......................................13

Wiring Diagram ............................... 16

Operation ................................... 17

Maintenance ................................. 22

Warranty .................................... 23

Technical Support ............................. 25

Welcome & Congratulations

Thank you and congratulations for purchasing an electric replace from

Dimplex. Please use our convenient online registration page to record

your model and serial numbers for future reference at

www.dimplex.com/register

NO NEED TO RETURN TO THE STORE

Questions with operation or assembly? Require Parts Information?

Product Under Manufacturer’s Warranty?

For Troubleshooting and Technical Support

OR Toll-Free 1-888-DIMPLEX (1-888-346-7539)

Monday to Friday 8:00 a.m. to 4:30 p.m. EST

In order to better serve you, please have your model and serial number

ready or register your product online before calling (See above)

Please carefully read and save these instructions.

CAUTION: Read all instructions and warnings carefully before

starting installation. Failure to follow these instructions may result in

a possible electric shock, re hazard and will void the warranty.

Model and Serial

Number Label

4 www.dimplex.com

When using electrical appliances,

basic precautions should always

be followed to reduce the risk of

fire, electric shock, and injury to

persons, including the following:

① Read all instructions before

installing or using this electric

replace.

② This replace is hot when in

use. To avoid burns, do not let

bare skin touch hot surfaces.

The trim around the heater outlet

becomes hot during heater

operation.

DANGER: High temperatures

may be generated under

certain abnormal conditions.

Do not partially or fully cover

or obstruct the front of this

heater.

③Extreme caution is necessary

when any heater is used by or

near children or invalids and

whenever the unit is left operating

and unattended.

④Young children should be

supervised to ensure that they do

not play with the appliance.

⑤ The appliance is not intended

for use by young children

or inrmed persons without

supervision.

IMPORTANT INSTRUCTIONS

⑥Do not operate the unit after

it malfunctions. Disconnect power

at the service panel and contact

Dimplex Technical Service for

service 1-888-346-7539.

⑦ Do not use outdoors.

⑧Never locate replace where

it may fall into a bathtub or other

water container.

⑨ To disconnect the replace,

turn the controls off, then

disconnect the circuit at the main

disconnect panel.

⑩ Do not locate the heater

immediately below a xed socket-

outlet.

⑪Do not insert or allow foreign

objects to enter any ventilation

or exhaust opening as this may

cause an electric shock or re, or

damage to the heater.

⑫ To prevent a possible fire, do

not block air intakes or exhaust in

any manner.

⑬ All electrical heaters have

hot and arcing or sparking parts

inside. Do not use in areas where

gasoline, paint, or ammable

liquids are used or stored.

SAVE THESE INSTRUCTIONS

⑭Use this heater only as

described in this manual. Any

other use not recommended by

the manufacturer may cause re,

electric shock or injury to persons.

⑮Do not burn wood or other

materials in the electric replace.

⑯ Do not strike the replace

glass.

⑰ Always use a certied

electrician should new circuits be

required.

⑱ Disconnect all power supply

before performing any cleaning,

maintenance or relocation of the

unit.

⑲When transporting or storing

the unit and cord, keep in a

dry place, free from excessive

vibration and store so as to avoid

damage.

WARNING: Remote control

contains small batteries.

Keep away from children.

If swallowed, seek medical

attention immediately.

WARNING: Do not install

battery backwards, charge, put

in re or mix with used or other

battery types - may explode or

leak causing injury.

!NOTE: Changes or

modications not expressly

approved by the party

responsible for compliance

could void user's authority to

operate the equipment.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

NO USER-SERVICABLE PARTS INSIDE

IMPORTANT INSTRUCTIONS

6 www.dimplex.com

Quick Reference Guide

Figure 1

1. The electrical information

regarding your electric replace

can be found on the rating label

located on the top of the unit.

Please use our convenient online

registration page to record your

model and serial numbers for future

reference at:

www.dimplex.com/register

2. If you have any technical

questions or concerns regarding

the operation of your electric

replace, or require service

contact customer service at

1-888-346-7539.

3. For dimensions of your

replace, refer to Figure 1.

16.49 in

419 mm

15.82 in.

402 mm

15.00 in.

381 mm

5.79 in.

147 mm

4.34 in.

110 mm

XLF60 60.31 in [1532 mm]

XLF60 61.41 in [1560 mm]

CAUTION: Ensure installation

does not allow replace to be

in direct contact with building

vapor barrier or insulation and

meets all local building code.

NOTE: A dedicated, properly

fused 15 Amp circuit is required,

rated for the appropriate voltage

(120V, 240V).

WARNING: Construction

and wiring must comply with

local building codes and other

applicable regulations to

reduce the risk of re, electric

shock and injury to persons.

WARNING: To reduce the risk

of re, electric shock or injury to

persons, always use a licensed

electrician.

WARNING: To reduce the

risk of re, do not store

or use gasoline or other

ammable vapors or liquids

in the vicinity of the heater.

1. Select a location that is

not susceptible to moisture

and is away from drapes,

furniture and high trafc.

2. Unpack the replace and

hardware from the box.

Fireplace Installation

!NOTE: Leave the front glass

and partially reective glass,

safely, in the box until the time

you are ready to install it.

3. Store the replace in a safe, dry

and dust free location until you

are ready to install the replace.

Framing

CAUTION: Two people will be

required for various steps of this

procedure.

This design of this unit allows

three options for installation:

partial recess, ush mounted or

sub-surface mounted.

2” x 6”

5 1/2" (14.0 cm)

16"

(40.6 cm)

2” x 4”

3 1/2" (9.0 cm)

XLF60: 60 5/8" (154.0 cm)

Figure 2

8 www.dimplex.com

Fireplace Installation (continued)

CAUTION: Sub-surface

mounting should be limited

to ½ in. (10 mm) to ensure

adequate air ow of heated air

out of the rebox area.

To frame the replace:

1. Prepare a wall with a framed

opening of 16 in. (40.6 cm)

high, 60 ⅝ in. (154.0 cm) wide,

with a bottom sill that is a

minimum of 3.5 in. (9.0 cm)

deep (Figure 2). The sill can

be constructed to support the

front of the unit to allow the

power supply wires to easily

be run behind or ush with the

back of the unit and a pass

thru hole drilled for electrical

wire routing.

WARNING: The top of the

replace is to be a minimum of

8 in (20.4 cm) from the ceiling.

!NOTE: It is recommended

that the bottom of the unit be

mounted between 30 in. (76.2

cm) and 40 in. (101.6 cm)

from the ground to maintain an

optimized viewing angle of the

ame.

WARNING: Do not attempt

to wire your own new circuits.

To reduce the risk of re,

electric shock or injury to

persons, always use a licensed

electrician.

WARNING: Ensure that the

circuit on which the replace is

to be installed has the power

cut off at the service panel

until installation is complete.

2. The unit is provided with an

installed ¾ in. (2.0 cm) trim.

Depending on the installation,

this trim can be removed by

removing the securing screws

and the 4 trim pieces.

3. Ensuring a minimum of 18 in.

(46.7 cm) of slack, route the

supply power wire through a

cable clamp (not included) and

in the opening in the back of the

unit. (Figure 3)

Figure 3

Grounding

Screw

Cable Clamp

Fireplace Installation (continued)

4. Lift replace, from the bottom

and the handles located on the

back, and insert into opening to

the desired depth.

5. Using a bubble level (supplied)

ensure that the replace is level

within the framing. Adjust as

required.

6. Drive four supplied mounting

screws through the four

mounting holes located on the

inside surface of the replace

chassis, into wall studs

(Figure 4).

Permanent Heat Disable

The replace heater can be

permanently disabled by removing

the electronic jumper on the main

control board. Disable the heater

before any other installation takes

place.

Figure 4

Mounting Holes

To disable the heater:

1. Locate the main control board

(Figure 4).

2. Pull out the electronic jumper

(shunt). The marking beside the

jumper is "HT EN" (Figure 5).

Use two conductor, non-metallic

sheath cable with ground wire

(3 wires total) for the incoming

power supply.

HT EN

Figure 5

Flame

Panel

Main Control Board

10 www.dimplex.com

Fireplace Installation (continued)

Electrical

120V Installation - Direct

Wire

CAUTION: Use the appropriate

wire to meet local and national

electrical codes for rated power

consumption.

To 120V direct wire:

1. Cut the wire to an appropriate

length.

2. Connect the L wire from the

unit to the live wire from the

power supply with a wire nut.

3. Connect the N wire from the

unit to the neutral wire from the

power supply with a wire nut.

4. Connect the G wire from the

unit to the ground wire from the

power supply with a wire nut

or attach the grounding wire

to the cover with the provided

grounding screw, by placing the

wire in-between screw and lock

washer and tighten (Figure 3).

5. Ensure that all wires are secure

and do not protrude past the

ame panel, so as not to be

visible after nal assembly.

6. Continue to the nal assembly

instructions.

120V Installation - Wall

Switch

!NOTE: Use a single pole, single

throw (On/Off) wall switch that is

rated for a minimum of

15 amps.

CAUTION: Use the

appropriate wire to meet local

and national electrical codes

for rated power consumption.

FIREPLACE JUNCTION BOX

120 V

POWER

SUPPLY

(BREAKER

PANEL)

WHITE - N

BLACK – L1

WHITE – N

BLACK – L1

GROUND - G

WALL

SWITCH

GROUND - G

Figure 6

Table of contents

Languages:

Other Dimplex Indoor Fireplace manuals

Dimplex

Dimplex BLF50-EU User manual

Dimplex

Dimplex IN-STUD V1525BT User manual

Dimplex

Dimplex BF33STP/DXP User manual

Dimplex

Dimplex DF2624L-EU User manual

Dimplex

Dimplex BLF3451 User manual

Dimplex

Dimplex SAHARA FIREPLACE 6903950000 User manual

Dimplex

Dimplex Dakota DKT20 User manual

Dimplex

Dimplex DCF7850 User manual

Dimplex

Dimplex DFG2562 User manual

Dimplex

Dimplex Winchester WIN28E User manual

Dimplex

Dimplex MULTIFIRE DF3015 User manual

Dimplex

Dimplex BLF74 User manual

Dimplex

Dimplex ELTHAM ETM20-AU User manual

Dimplex

Dimplex SIL48 User manual

Dimplex

Dimplex 690932 Series User manual

Dimplex

Dimplex Somerley SOM20 User manual

Dimplex

Dimplex DF2690 User manual

Dimplex

Dimplex BF45DXP User manual

Dimplex

Dimplex 3 Step E User manual

Dimplex

Dimplex BELLINI BLN15W User manual

Dimplex

Dimplex XHD26L User manual

Dimplex

Dimplex BF8000ST User manual

Dimplex

Dimplex SP120SP220 User manual

Dimplex

Dimplex DF2608-EUE User manual

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual