Dimplex DCPFS1 User manual
The Smart fan that knows where you are
and how hot you feel
Model: DCPFS1
INSTRUCTION MANUAL
PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USING THE UNIT
TABLE OF CONTENTS
IMPORTANT INFORMATION 3
PARTS DESCRIPTION 5
LED DISPLAY GUIDE 6
REMOTE CONTROL GUIDE 7
INSTALLATION INSTRUCTIONS 8
OPERATING INSTRUCTIONS 9
EXTRA FEATURES 12
BODY SENSOR FUNCTION 13
BODY SENSOR FUNCTION TROUBLESHOOTING 14
CLEANING & MAINTENANCE 15
TECHNICAL SPECIFICATIONS 16
WARRANTY 17
DISPOSAL 17
3
IMPORTANT INFORMATION
Please retain this manual for product warranty and for future reference.
• Never touch the power cord with wet hands as there is a danger of electric shock.
• Never place objects into the Intellifan’s air inlets and outlets. This could
damage the product and lead to a risk of electric shock.
• Never use ammable aerosol sprays such as insect repellent near the Intellifan
as it could damage the unit.
• Never use the unit if the power cord is damaged exposing the internal wiring or
exhibits any other sign of disrepair. Using the Intellifan with a damaged power
cord poses a serious risk of electric shock and/or re.
• Power cords must only be replaced by authorized maintenance professionals
or the manufacturer.
• Never use the appliance in proximity to bathtubs, pools, ponds or water
sprinklers.
• Never place the appliance near walls, curtains or other potentially combustible
materials during operation to avoid the risk of re.
• Never cover or put anything on the appliance or over its air vents while in use
to avoid overheating.
• Never plug the unit into a power socket before assembly is complete.
• The batteries from the remote control must be removed and disposed of safely,
before the appliance is disposed of.
• Never use an extension cord with this unit.
• All repairs must be undertaken by an authorized service center.
• This unit must only be plugged into a 220-240V ~ 50Hz AC, 10 Amp power
outlet. Check to ensure the voltage of the power outlet matches what is required
by the appliance. Always check the voltage after moving to a new area.
• Ensure the unit is placed on an even surface while in operation.
• Disassembling the appliance will affect the product’s safety.
• Avoid prolonged exposure of young children to the direct airow of the Intellifan
as it may lead to illness or affect the health of the child.
• When disconnecting the Intellifan from the power socket, do not pull on the
power cord as it may cause damage and lead to risk of electric shock.
4
• Ensure the power plug is fully inserted into the socket and is clean of any
foreign material.
• If the product emits an abnormal sound during operation, turn it off and
disconnect the power immediately.
• Do not fold the power cord or place heavy objects on top of it. Doing so may
damage the cord and pose a serious risk of electric shock and/or re.
• Do no clean the appliance with water, which could damage the product and
lead to risk of electric shock.
• The appliance should be turned off and unplugged from the power socket if it is
not intended to be used for a long duration of time or the user intends to be away.
• It should not be left in operation while in the company of unattended children,
pets, or persons with reduced physical, sensory or mental capabilities.
• Keep the unit at least 1 metre away from electric appliances such as TV’s and
radios to avoid electromagnetic interference.
• Do not expose the unit to direct sunlight to avoid surface colour fading.
• This appliance is for indoor use only.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not leave the Intellifan unattended.
• Do not use the Intellifan near a window. Rain may create an electrical hazard.
Do not leave the Intellifan operating adjacent to an area where water has been
collected to avoid the potential of electrical hazards.
Attention: This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
5
PARTS DESCRIPTION
1. Right-side cowling
2. LED indicator lights
3. Right-side front panel
4. Touch control panel
5. Rear housing
6. Power cord
7. Screw bracket
8. Left air inlet
9. Fan cowling
10. Left-side panel
11. Front housing
12. Infrared Body sensor
13. Remote control sensor
14. Oscillation base
15. Remote control
16. Remote control holder
17. Support column
18. Pedestal base
19. Weighted balancers
1
4
8
9
10
11
12
13
14
15
16
17
18
19
5
6
7
2
3
6
LED DISPLAY GUIDE
Power On
Natural Breeze Mode
Night Mode
Eco Temperature Sensor Mode
1 Hour Timer Setting
2 Hour Timer Setting
4 Hour Timer Setting
8 Hour Timer Setting
High Wind Speed
Medium Wind Speed
Low Wind Speed
60° Horizontal Oscillation
90° Horizontal Oscillation
180° Horizontal Oscillation
360° Horizontal Oscillation
90° Vertical Oscillation
7
REMOTE CONTROL GUIDE
Select Mode
Vertical
Oscillation
Wind Speed Timer Setting
Power on/off
Horizontal Oscillation/
Body Sensor mode
8
INSTALLATION INSTRUCTIONS
1. Remove parts from box
2. Insert one end of the support column into the pedestal base and screw them
tightly together with the screw key provided. (Diagram 1)
3. Place the main body of the Intellifan on top of the support column. (Diagram 2)
4. Use the Philips head screw to attach the main body of the Intellifan to the
support column through the screw bracket. (Diagram 3)
5. After assembly, place on at ground, plug into power socket and operate in
accordance with the instructions. (Diagram 4)
Diagram 1 Diagram 2 Diagram 3 Diagram 4
9
Select
Mode
Vertical
Oscillation
Wind
Speed
Timer
Setting
Power
on/off
Horizontal
Oscillation/
Body Sensor
mode
OPERATING INSTRUCTIONS
Touch screen controls are installed on this unit. All of the unit’s functions can be
operated by lightly touching the desired function on the control panel.
NOTE: When rst connected to power, all of the LED lights should turn on for
2 seconds and be accompanied by 2 BEEP sounds. This signals the unit is
correctly assembled and ready for operation. The LED lights will then turn off,
leaving the unit in Standby mode. In this mode only the ON/OFF button will be
responsive. (Two BEEPs means: “connected to power”; one BEEP will sound
when using the touch screen functions; and one BEEP means “power off”.)
TOUCH CONTROL PANEL
1. ON/OFF
Press the POWER button to turn the Intellifan on. You must turn the Intellifan on
before selecting any additional wind speeds or modes.
Press the POWER button again to turn the Intellifan off and put it into STANDBY mode.
The wind SPEED and OSCILLATION settings will be saved from the last time it
was used providing that the Intellifan has remained in STANDBY mode power (by
leaving the Intellifan plugged in and switched on at the wall).
The previous MODES (NATURAL, SLEEP and ECO) and TIMER settings will not
be saved and the default setting will be OFF.
2. Mode
The default mode is NORMAL. Press the MODE button to switch between
“NATURAL BREEZE”, “SLEEP”, “ECO TEMPERATURE SENSOR” and “NORMAL”.
The LED panel will display the changes accordingly.
Each mode can be used in high, medium or low. The relevant wind speed will light
up next to the following icons on the LED display.
High
Medium
Low
10
• NORMAL – provides a constant wind speed. Select either, high, medium or
low wind speed.
NOTE: The NORMAL mode is not displayed on the LED panel. All three LED
MODE indicators will turn off in normal mode.
• NATURAL BREEZE – for the feeling of a natural breeze, this mode
provides a uctuating wind speed. This mode will also uctuate on high,
medium or low levels.
• SLEEP – this mode provides a natural breeze that gets softer. Perfect
to help you cool down quickly as you get to sleep and then keep you cool as
night temperatures descend.
- HIGH: First 30 minutes HIGH/NATURAL wind speed; next 30 minutes
MEDIUM/NATURAL wind speed; remaining time LOW/NATURAL
wind speed
- MED: First 30 minutes MEDIUM/NATURAL wind speed; remaining time
LOW/NATURAL wind speed
- LOW: Remaining time LOW/NATURAL wind speed
• ECO TEMPERATURE SENSOR – This mode adjusts the wind speed
depending on the room temperature. The Intellifan will automatically set the
wind speed to:
- HIGH, when the room temperature is greater than 29°C
- MEDIUM, when temperatures are between 25°C and 29°C
- LOW, in temperatures less than 25°C
Wind speed controlled with Smart sensor
Table of contents
Other Dimplex Fan manuals
Dimplex
Dimplex DCMIST30 User manual
Dimplex
Dimplex DCAC20F User manual
Dimplex
Dimplex DCBOX50MBK User manual
Dimplex
Dimplex DCTFP92 User manual
Dimplex
Dimplex DCPFQ40 User manual
Dimplex
Dimplex DCFF40C User manual
Dimplex
Dimplex DCACE20R User manual
Dimplex
Dimplex H 260E eco User manual
Dimplex
Dimplex CABM1 User manual
Dimplex
Dimplex DCTF94A User manual
Dimplex
Dimplex DCBOX50MB User manual
Dimplex
Dimplex DCFF40MB User manual
Dimplex
Dimplex DCPF40CH User manual
Dimplex
Dimplex DCACP30HC User manual
Dimplex
Dimplex LWP 300 W User manual
Dimplex
Dimplex Dual-Cool User manual
Dimplex
Dimplex DCTF81R User manual
Dimplex
Dimplex DCFF50MBK User manual
Dimplex
Dimplex DCTF3HCP User manual
Dimplex
Dimplex GDC-TF100RS User manual
Popular Fan manuals by other brands
ELTA FANS
ELTA FANS H03VV-F installation guide
Hunter
Hunter 20714 Owner's guide and installation manual
Emerson
Emerson CARRERA VERANDA CF542ORB00 owner's manual
Hunter
Hunter Caraway Owner's guide and installation manual
Panasonic
Panasonic FV-15NLFS1 Service manual
Kompernass
Kompernass KH 1150 operating instructions
