DIGIWEB Fritz!Box 4040 User manual

Quick Start Guide

Fritz!Box 4040 / Fritz!Box 7560

Digiweb Electric Broadband

Contents

Step 1: Unpack Contents Page 3

Introducing SIRO’s Optical Network Terminal (ONT) Page 4

Step 2: Connect the 12V 2A DC Power Supply Unit (PSU) Page 5

Step 3: Fritz!Box 4040 Connect the Ethernet Cable Page 6

Step 3: Fritz!Box 7560 Connect the Ethernet Cable Page 7

Step 4: Enable Wi-Fi Connection Page 8

Step 5: Activate Wireless Connection Page 9

Step 6: Choose your Wireless Network Page 10

Step 7: Wi-Fi Network Security Key / Password Page 11

Step 8: Broadband Talk VoIP Phone Setup Page 12

Internet Connection Status Page 13

Manual Conﬁguration Settings Page 14

Troubleshooting - Fritz!Box Page 15

Troubleshooting - SIRO’s Optical Network Terminal (ONT) Page 16

Factory Reset Page 17

User Manuals / Parental Controls Page 19

Digiweb Contact Details Page 20

FON

WLAN

DECT

Step 1: Unpack Contents

You will ﬁnd the following items included in your

new Broadband Pack.

A. 1 x Fritz!Box 4040 or Fritz!Box 7560

B. 1 x 12V 2A DC Power Supply Unit (PSU)

C. 2 x Ethernet / Network Cable

Fritz!Box Quick Start Guide

Welcome to your Quick Start Guide for Fritz!Box 4040 & Fritz!Box 7560.

We would like to thank you for choosing Digiweb Electric Broadband -

Introducing SIRO’s Optical Network Terminal (ONT)

SIRO’s Optical Network Terminal (ONT) establishes the handover point between

SIRO’s network and the Digiweb network. Digiweb’s Fritz!Box directly connects

to the ONT, thus establishing connectivity to the internet.

PLEASE NOTE: SIRO’s Optical Network Terminal (ONT), wall socket and ﬁbre

cabling are the property of SIRO and must remain in-situ at the installed

location. Please do not tamper with or remove any of this equipment from the

place of installation. If you’re moving residence, the SIRO equipment must

remain at the installed location.

SIRO’s Optical

Network Terminal

LED’s on the SIRO ONT

SIRO’s Interior

Wall Socket

Power Button & Ports on the SIRO ONT

Step 2: Connect the 12V 2A DC Power Supply Unit

(PSU) to the Fritz!Box

•ConnectthePSU(B)totheFritz!Box(A)asperabovediagram.•ConnectthePSU(B)tothenearestpowersocket.

Step 3: Connect the Ethernet / Network Cable

For Fritz!Box 4040

•ConnecttheEthernet/NetworkCablefromtheOpticalNetworkTerminal(ONT) to the WAN port on the Fritz!Box 4040.

•Waitupto5minsforthePowerlightandInternetlightonyourFritz!Boxtogo steady green.

•IfthePowerandInternetlightsonyourFritz!Boxfailtogosteadygreen, please check your cable connections are ﬁrmly connected and

ensure that you are connected to the correct dedicated LAN port on the

Optical Network Terminal (ONT).

•UponcompletingtheabovechecksandwherethePowerandInternetlights on your Fritz!Box fail to go steady green, please contact the Digiweb

Technical Support team as per contact details provided on the back of this

Quick Start Guide.

Note: The Installation technician on behalf of Digiweb will complete this step

for you during installation.

LAN

WAN

INFO

Info

LAN

WPS

Step 3: Connect the Ethernet / Network Cable

For Fritz!Box 7560

•ConnecttheEthernet/NetworkCablefromtheOpticalNetworkTerminal(ONT) to the LAN 1 port on the Fritz!Box 7560.

•Waitupto5minsforthePower/DSLlightonyourFritz!Boxtogosteadygreen.

•IfthePower/DSLlightonyourFritz!Boxfailstogosteadygreen,pleasecheck your cable connections are ﬁrmly connected and ensure that you are

connected to the correct dedicated LAN port on the Optical Network

Terminal (ONT).

•UponcompletingtheabovechecksandwherethePower/DSLlightonyourFritz!Box fails to go steady green, please contact the Digiweb Technical

Support team as per contact details provided on the back of this Quick Start

Guide.

Note: The Installation technician on behalf of Digiweb will complete this step

for you during installation.

LAN 3

LAN 4

Power

DSL

FON 1

LAN 1

DECT

LAN

Step 4: Enable Wi-Fi Connection

For Windows PC / Laptop:

•Clickthewindowsbuttontypicallyplacedinthebottomleft hand corner of your desktop.

•Choose“ControlPanel”•Choose“NetworkandInternet”•Choose“NetworkandSharing”or“NetworkandSharingCentre”•Choose“Changeadaptersettings”•Rightclick“WirelessNetworkConnection”•Select“Enable”.DONOTselect“Disable”ifadapterisalreadyenabled.Note: Your computer setup and screen may dier from the above.

For Tablet / Smartphone:

•Gotosettings>Wi-Fi>EnsureswitchisonperAndroidandAppleiOSscreenshots above.

WLAN

Step 5: Activate Wireless Connection

•EnsurethattheWLANLEDisONsteadygreenasperabove.

•IfWLANLEDisopressWLANbuttononce-

(do not hold down) to activate WLAN.

For Windows PC / Laptop:

•Rightclickonthe“WirelessNetworkConnection”•Select“Connect/Disconnect”For Tablet / Smartphone:

•Noadditionalstepsrequiredatthispoint.

Step 6: Choose your Wireless Network

For Windows PC / Laptop:

•OnthebaseofyourFritz!Boxmodemyouwillndthenetworknameforexample“FRITZ!Box4040AB”or“FRITZ!Box7560AB”•Select“FRITZ!Box4040AB”or“FRITZ!Box7560AB”SSIDfromthelist

currently appearing on your screen from Step 5.