1 xMDFboardwitheyelets
1 xMDFboardwithout eyelets
Acrylic Components:
2 xmirrorelement front(remove the protective filmfromeachone!)
1 xdecorative component,transparent,front(removethe protective film!)
40 xacrylic numbers and symbols(remove theprotective filmonbothsides!)
1 xredtoolfortheremovalofthe protective film
FurtherComponents:
1 xchromefoil,laser-cut,self-adhesive
1 xfelt
Tips fortheAssembly:
Importantnotice: All acrylicpartswerecutwithalaser.Duetothis productionmethodthere isaprotectivefilmon
their surface.It has tobe removedbeforethe assembly.The protective filmpreventstheacrylic frombeing damagedin
the productionprocess.Underneaththefoiltheacrylicis clean.
The MDFcomponentswere alsocutwithalaser.Themethodcreatesanedge whoseodormay possiblybeperceivedas
unpleasant woododor.Ifnecessary,theMDFcomponentsaretobeairedoutoutdoors, 24 to36 hoursare sufficient.
StainsontheMDFare normal and whentheclock hasbeenassembledthey arebeing coveredby the chrome foil and
themotherboard.
The protective filmneedstobe removedcarefullyfromthe acrylic numbers.Forthis purposethekit containsared
acrylic tool.Withthis toolthe protective filmcanbe liftedontheedgesforeasierremoval.Pleasebevery careful.
Especiallythetwolight pipesofevery acrylic numberare veryfragile and break whenthere is toomuchstrain. Take
yourtime forthis step.
It is alsorecommendabletowear glovessothe acrylicdoesnotget stained. In case there are fingerprintsonthe acrylic
inspite ofthat,remove themimmediately using anewand cleanmicrofibercloth. Pleasedo notusealcoholor
methylated spirits tocleanit.Thatdestroys the acrylicimmediately! Iftheuseofcleaning detergentsisnecessarythen
please useonly plasticcleanerwithout alcoholand without solvents.
Please bevery carefulwiththemotherboardwhiletheclockis not assembledyet.Especially theoperating panelis
fragile (e.g. concerning pressure).Pleasedonotpress it until thewhole assemblyoftheswitchand the encoderis
completed.
Throughoutthe assemblytoolsare unnecessary.Afitting Torxscrewdriveris helpfulbut shouldnot be usedwithforce.
The screwsshouldonly betightenedwithyourhands.That is very important forthe insertionofthe acrylic numbers.
Only insert themwhilethescrewsarealittle tightenedbut still loose.Ifyoutightenthemtoomuchthefragile acrylic
numbers canbreak.
Please add theknobforthe encoderand the aluminumknobforthepush-buttoncarefully.Duetothe laser-cutting the
knobfortheencoderhasone sidewhere it is easiertoadd and onewhere it isalittle harder.Ifyouhave problemswith
this componenttryturning it around.
SoundModule:
