Detecto 495 User manual
Back of beam
B1
A1
A3
1/4-20 Screws (4)
A2
C
B
A
Set-Up Procedure
for
Low-Profile Wheelchair Scale
Beam Type
Model 495/4951
1. Remove all packing materials.
2. Set scale base on a flat, level surface. Slide ramp pins into T-slots on base;
drop pins into the grooves.
3. Remove 4 (1/4-20) screws from the column bracket (A1). Set aside
(to be used on steps 4 and 5).
4. Set column and beam assembly (B) on column bracket
(A1). Be sure the back of the beam is facing the scale
deck (A). Secure column and beam assembly with
4 (1/4-20)screws. Do not tighten the screws.
5. To attach handrail (C), remove 2 (3/8-16) screws from the top
of weighbridge side. Set the handrail on the weighbridge
side, align holes, reinstall 2 (3/8-16) screws and tighten.
6. If available, place the scale on a table or workbench, otherwise place the scale on floor.
In either case, DO NOT tilt or place scale on it’s side. Next, push bottom of the hanger (B1)
back towards the scale weighbridge (A), lift long lever and the nose iron (A2) up, slide the
hanger (B1) under the nose iron pivot (A3). After the hanger is attached, tighten the 4 (1/4-20)
screws. The scale assembly is now complete.
7. Move upper and lower poise of the beam to “0” zero position.
8. Beam should balance so that the tip end of the beam is centered in a trig loop. If the beam is
not centered, adjust the zero balance screw to the right or left until the beam is in a balanced
position.
9. If the beam does not come to a balanced position, check all mechanical connections in the
scale base assembly and the column and beam assembly. Repeat step 7. The scale should
now be ready for operation.
Back of Beam
Set Upper and Lower Poise
to “0” Position
Zero Balance Screw
Trig Loop
Lift Long Lever
Hanger
B1
A3
A2
T
D
E
T
C
O
E
A Division of Cardinal Scale Manufacturing Co.
P.O. Box 151, Webb City, MO 64870 USA
Ph: 417-673-4631 or 1-800-641-2008 Fax: 417-673-5001
e-mail: [email protected]
Visit our Web site at www.detecto.com
®
0066-M188-01 Rev E
09/05
Printed in USA
This manual suits for next models
1
Table of contents
Other Detecto Scale manuals
Detecto
Detecto PS-11 User manual
Detecto
Detecto AP-4KD User manual
Detecto
Detecto 8440 User manual
Detecto
Detecto 6570 User manual
Detecto
Detecto DL Series User manual
Detecto
Detecto 8430S User manual
Detecto
Detecto 6475 User manual
Detecto
Detecto 6855KGEU User manual
Detecto
Detecto 8440 User manual
Detecto
Detecto 337 User manual
Detecto
Detecto D110 User manual
Detecto
Detecto 6100 Series User manual
Detecto
Detecto PS-4 User manual
Detecto
Detecto 6856 User manual
Detecto
Detecto AP-10 User manual
Detecto
Detecto DR400C User manual
Detecto
Detecto D228 User manual
Detecto
Detecto APEX APEX-RI User manual
Detecto
Detecto 750 User manual
Detecto
Detecto 8450 User manual
