Dell PowerEdge M1000e User manual
Dell™ PowerEdge™ M1000e
Systems
Configuration Guide
Dell™ PowerEdge™ M1000e
Systems
Configuration Guide
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of
your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data
and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury,
or death.
____________________
Information in this document is subject to change without notice.
© 2008 Dell Inc. All rights reserved.
Reproduction of these materials in anymanner whatsoever without the written permissionof Dell Inc.
is strictly forbidden.
Trademarks usedinthis text:Dell, theDELL logo,PowerEdge,and DellOpenManage aretrademarks
of Dell Inc.; Microsoft, Windows, and Active Directory are either trademarks or registered trademarks
of Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.
August 2008
Contents 3
Contents
1 About Your System . . . . . . . . . . . . . . . . . . 7
System Overview . . . . . . . . . . . . . . . . . . . . . 7
System Control Panel Features . . . . . . . . . . . . . 10
LCD Module . . . . . . . . . . . . . . . . . . . . . . . 11
LCD Module Menus . . . . . . . . . . . . . . . . 12
Back-Panel Features . . . . . . . . . . . . . . . . . . 13
Blades . . . . . . . . . . . . . . . . . . . . . . . . . . 13
CMC Module . . . . . . . . . . . . . . . . . . . . . . . 16
CMC Daisy Chaining (Enclosure Stacking) . . . . 17
iKVM Switch Module . . . . . . . . . . . . . . . . . . 19
2 Initial System Configuration . . . . . . . . . . 21
Before You Begin . . . . . . . . . . . . . . . . . . . . 21
Power Requirements . . . . . . . . . . . . . . . . 21
Network Information . . . . . . . . . . . . . . . . 21
Initial Setup Sequence . . . . . . . . . . . . . . . . . 21
Configuring the CMC . . . . . . . . . . . . . . . . . . 22
Initial CMC Network Configuration . . . . . . . . 22
Logging in to the CMC Using the Web-Based
Interface . . . . . . . . . . . . . . . . . . . . . . 25
Adding and Managing CMC Users . . . . . . . . . 26
4Contents
Configuring iDRAC Networking Using the
Web-Based Interface . . . . . . . . . . . . . . . 27
Setting the First Boot Device for Servers . . . . . 28
Configuring and Managing Power . . . . . . . . . 28
Installing or Updating the CMC Firmware . . . . . 29
Configuring the Optional iKVM Switch Module . . . . 31
Enabling iKVM Access to the Dell CMC
Console . . . . . . . . . . . . . . . . . . . . . . . 31
Updating the iKVM Firmware . . . . . . . . . . . . 31
Tiering the Avocent iKVM Switch From an
Analog KVM Switch . . . . . . . . . . . . . . . . 32
Tiering the Avocent iKVM Switch From a
Digital KVM Switch . . . . . . . . . . . . . . . . . 33
Viewing and Selecting Servers . . . . . . . . . . 34
FlexAddress . . . . . . . . . . . . . . . . . . . . . . . 36
3 Configuring the I/O Modules . . . . . . . . . . 37
Overview . . . . . . . . . . . . . . . . . . . . . . . . . 37
Before You Begin . . . . . . . . . . . . . . . . . . . . 39
Network Information . . . . . . . . . . . . . . . . 39
Switch Modules . . . . . . . . . . . . . . . . . . . . . 39
Configuring a Switch Module Network Ethernet
Port Using the Web-Based Interface . . . . . . . 39
Cisco SFS M7000e Infiniband Switch Module . . . 40
PowerConnect M6220 Ethernet Switch
Module . . . . . . . . . . . . . . . . . . . . . . . 42
Cisco Ethernet Switch . . . . . . . . . . . . . . . 43
Brocade M4424 SAN I/O Module . . . . . . . . . 45
Contents 5
Pass-through Modules . . . . . . . . . . . . . . . . . 47
Ethernet Pass-through Module . . . . . . . . . . 47
Fibre Channel Pass-through Module . . . . . . . 49
6Contents
Configuration Guide 7
1
About Your System
System Overview
Your system can include up to 16 half-height blades (server modules), eight
full-height blades, or a mixture of the two blade types (see Figure 1-1,
Figure 1-2, and Figure 1-3). To function as a system, a blade is inserted into a
enclosure (chassis) that supports power supplies, fan modules, a Chassis
Management Controller (CMC) module, and at least one I/O module for
external network connectivity. The power supplies, fans, CMC, optional
iKVM module, and I/O modules are shared resources of the blades in the
enclosure.
8Configuration Guide
Figure 1-1. Blade Numbering – Half-Height Blades
12345678
910111213141516
Other manuals for PowerEdge M1000e
13
Table of contents
Other Dell Network Hardware manuals
Dell
Dell PowerVault TL4000 User manual
Dell
Dell MC SD-WAN Edge 3400 Advanced User manual
Dell
Dell SonicWALL NSA 5600 User manual
Dell
Dell PowerVault RD1000 User manual
Dell
Dell OptiPlex Small Form Factor 7010 User manual
Dell
Dell PowerVault 122T SDLT 320 User manual
Dell
Dell EMC VxRail P470 User manual
Dell
Dell PowerEdge FC830 User manual
Dell
Dell SonicWALL NSA E6500 User manual
Dell
Dell PowerVault NX1950 User manual
Dell
Dell EMC XC640 Series Manual
Dell
Dell XC720xd User manual
Dell
Dell 5821E User manual
Dell
Dell EMC NX3240 User instructions
Dell
Dell CX4 Series User manual
Dell
Dell EMC NX430 System User manual
Dell
Dell FS7500 Manual
Dell
Dell 53-1002116-01 Service manual
Dell
Dell PowerFlex R750 User manual
Dell
Dell SonicWALL NSA E8510 User manual
Popular Network Hardware manuals by other brands
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL product manual
B&B Electronics
B&B Electronics ZXT9-IO-222R2 product manual
Yudor
Yudor YDS-16 user manual
D-Link
D-Link ShareCenter DNS-320L datasheet
Samsung
Samsung ES1642dc Hardware user manual
Honeywell Home
Honeywell Home LTEM-PV Installation and setup guide
