DatoHome L-F504 User manual
L-F504
Fingerprint
Unlock
Password
Unlock
App Unlock RF tag Key
11
Features
① Inclined panel direction for better view and convenient operation；
② Replaces cylindrical locks easily without need of adding new holes；
③ Auto locks after closing door (requires auto-lock module)；
④ Multiple unlocking methods: Fingerprint， app， passcode， IC-card， mechanical key；
⑤ Open-passage mode / locked-mode from inside switch；
⑥ Low voltage alarm；
⑦ Stores access records；
⑧ Emergency power back-up；
⑨ Mechanical key override.
Table of Content
Features .............................................................................................................................................................................. 1
Product Description .......................................................................................................................................................... 2
Assembly Diagram ........................................................................................................................................................... 3
Included in the box ............................................................................................................................................................ 4
Preparing the door ............................................................................................................................................................ 5
Preparing for Installation .................................................................................................................................................. 6
App Operation Guide ........................................................................................................................................................ 10
Settings by Keypad ............................................................................................................................................................ 17
Use-Guide .......................................................................................................................................................................... 18
Specifications .................................................................................................................................................................... 19
2
Product Description
① Fingerprint Reader
② Passcode Keypad
④ RFID-Card Sensor Area
⑤ Mechanical Key Cover
③ Backlights
⑥ Mirco-USB port (inside)
⑦ Battery Cover
⑧ Lock/Unlock Thumbturn
⑨ Lock/Unlock Button
(hold 1 second)
⑩ Secure-Lock Mode Switch
⑪ Rear PCB
⑫ Reset button
⑬ Switch for door direction
⑭ Cable Socket
RL
3
Assembly Diagram
Battery cover Mounting plate
Deadbolt
Tailpiece
4
If you have questions regarding the installation process please contact us by mail [email protected]
or by phone (929)336-6777.
DatoHome
Youtube Channel
DatoHome
Technical Support
Included in the Box
A
Exterior panel
1PC
Screws A Screws B Screws C Screws D Key
4PCS 3PCS 1PC 2PCS 2PCS
Connecting
screw
1PCS
Interior panel
1PC
Mounting plate Deadbolt Strike parts
1PC 1PC 1PC
F G H I J K
B C D E
Before installing， please scan the QR codes below to watch our easy step-by-step youtube videos
on how to install your L-F504.
5
Preparing for the Door
2"
38
/
2"
34
/
a: Measure to confirm that the door is between
(35mm~45mm) thick
b: Measure to confirm that the hole in the door is 2﹄(55 mm)
c: Measure to confirm that the backset is either - (60-70mm)
d: Measure to confirm that the hole in the door edge is 1﹄ (25 mm)
1"
38
/
1"
34
/
~
（35~45mm）
(25mm)
（70mm）
２
３
４
＂
（60mm）
２
３
８
＂
（55mm）
２
＂
or
1
＂
1"
38
/
1"
34
/
~
Screws for strike plate
Angle faces jamb
60 OR 70mm
Install the deadbolt.
You may have to adjust your bolt length. Make sure the
slot in the bolt is centered in the hole and arrow on
deadbolt points "UP"
Adjust the deadbolt
basket length
6
Preparing for Installation
For cable wire
For magnetic
sensor wire
Connecting
screw
Cable
a.
b.
Mout the connecting screws on the
exterior panel
Route the cable through the door
BELOW the bolt. Insert the tailpiece
of exterior panel into the slot of the
deadbolt and push the front panel
onto the door.
NOTE: The tailpiece should be in a
vertical position.
Step 1:
Install the interior mounting plate. Route the
cable below the bolt and through the hole on
the right side of the mounting plate. Secure
the mouting plate with screws B.
Step 2:
Screws B
Wire
7
Remove the battery cover. If the lock is for right-opening
doors， keep the thumbturn in vertical position and door
direction switch towards ﹃R﹄ (right). If the lock is for a
left-opening door， keep the thumbturn in horizontal
position， and the door direction switch towards ﹃L﹄ (left).
Step 3:
Connect the cable from the exterior panel into the socket of
the interior panel. Insert the tailpiece into the lock/unlock
thumbturn.
Step 4:
RL
Page 2
8
Screws
D
Screw C
Fix the interior panel onto the
mounting plate with screws.
Step 5:
Load 4 AA alkaline batteries in the battery
slots in the rear panel. Fixate battery cover
with a screw.
Step 6:
9
Need Help? Contact Customer Support
Visit: https://www.datoaihome.com/pages/technical-support
Service line : (929)336-6777
Email: [email protected]
Test the lock:
Turn the thumbturn of the interior panel to check if the deadbolt protrudes and retracts smoothly.
Insert the mechanical key and turn to check if deadbolt moves smoothly. Program passcode and RFID-Card，
check if functional. Shut door to check if deadlock protrudes and retracts in and out of dust box and strike
plate smoothly. If not， please check installation steps or contact support.
If auto-locking is desired, please install the magnetic sensor or
set time to auto lock the door in the app.
① With Magnetic Sensor:
Route the wire through the square hole on the left side of the
mounting plate, and connect the magnetic sensor wire to the
"Magnet" socket on the PCB.
Attach the magnetic sensor to the door with either adhesive
tape or screws.
Attach the corresponding magnet to the doorframe, directly
across the point where the magnetic sensor is located when
door is shut.
② Without Magnetic Sensor:
Open the app --> setting --> automatic locking --> enable
Step 7:
Magnetic sensorMagnet
Other DatoHome Door Lock manuals
