Datalogic Smart-VS WebApp User manual

Smart-VS WebApp

USER’S GUIDE

Smart Vision Sensor

Datalogic S.r.l.

Via S. Vitalino, 13

40012 Calderara di Reno (BO)

Italy

Tel. +39 051 3147011

Fax +39 051 3147205

This manual refers to software version 1.0.1 and later.

duced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any

purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates.

Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and

transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not

remove or alter any proprietary notices, including copyright notices, contained in this documentation and

shall ensure that all notices appear on any reproductions of the documentation.

Electronic versions of this document may be downloaded from the Datalogic website (www.datalogic.com).

If you visit our website and would like to make comments or suggestions about this or other Datalogic pub-

lications, please let us know via the "Contact" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is complete and accu-

rate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein,

nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the

right to change any specification at any time without prior notice.

Trademarks

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including

the U.S.A. and the E.U.

Patents

See www.patents.datalogic.com for patent list.

USER’S GUIDE

iii

CONTENTS

SMART-VS WEBAPP...................................................................................................1

Teaching .......................................................................................................................... 2

Step 1: Image Setup ............................................................................................................................2

Step 2: Acquire GOOD .........................................................................................................................3

Step 3: Acquire NO GOOD ...................................................................................................................4

Step 4: Learn .......................................................................................................................................4

Monitoring ....................................................................................................................... 5

Settings ...........................................................................................................................7

Utilities ........................................................................................................................... 8

SMART-VS

USER’S GUIDE

Smart-VS WebApp

Before using a Smart-VS device, a Teaching procedure must be performed. Teaching can

be completed either using the embedded HMI (refer to the Smart-VS Quick Reference

Guide) or the Smart-VS WebApp graphic user interface.

NOTE

To access the Smart-VS WebApp, connect to the device IP address 192.168.3.100 via

Ethernet.

In case of a new device, the user is automatically redirected to the Teaching Wizard.

In case of an already trained device, the Monitoring page is displayed.

A Settings page is also available to adjust the device settings.

Device information and the software update feature are available on the Utilities page.

To access the Smart-VS WebApp, Google Chrome is the recommended

Internet browser.

SMART-VS WEBAPP

SMART-VS

TEACHING

To perform Teaching on your Smart-VS device, enter a job name, select the bank where

to store it, click on the Create Job button, and follow the procedure described below.

Step 1: Image Setup

On the Image Setup page, select Start Automatic Setup to automatically set the Focus

Distance, the Exposure Time, and the Sensor Gain parameters (suggested). Alternatively,

select Advanced Image Settings to manually set the parameters.

It is also possible to move the Field of View based on the application needs, which can

be useful when objects of different batch formats must be inspected on the same line.

To do this, simply click on the image and drag it throughout the gray area.

After completing image setup, click NEXT.

TEACHING

USER’S GUIDE

Step 2: Acquire GOOD

On the Acquire GOOD page, one or more GOOD objects can be acquired by clicking on

the Teach button. It is recommended to acquire as many GOOD images as the known

number of instances to be treated as GOOD.

NOTE

After adding at least one object, you can click Next and go to the Acquire NO GOOD

page.

A maximum of 6 images can be stored in both GOOD and NO GOOD boxes.

Click on an acquired object in the GOOD box and select DELETE to delete it.

SMART-VS WEBAPP

SMART-VS

Step 3: Acquire NO GOOD

On the Acquire NO GOOD page, one or more NO GOOD objects can be acquired by

clicking on the Teach button.

It is recommended to acquire as many NO GOOD images as the known number of

instances to be treated as NO GOOD.

NOTE

After adding at least one NO GOOD object, you can click on the Teach button.

Step 4: Learn

This step is completed automatically.

Once the device is trained, the Smart-VS WebApp switches to the Monitoring page.

A maximum of 6 images can be stored in both GOOD and NO GOOD boxes.

Click on an acquired object in the NO GOOD box and select DELETE to delete

it.

MONITORING

USER’S GUIDE

MONITORING

The Monitoring page is divided into an upper bar, a main area, and a bottom bar.

The upper bar contains the job name to the left. Use the drop-down menu to switch to

another job (if present).

NOTE

Next to the job name, the following icons are present:

Upload job: uploads a job from your PC (.svscfg file)

Download job: downloads the current job on your PC

Add new job: switches to the Training wizard to create a new job

Delete job: deletes current job

The main area includes:

• the GOOD and NO GOOD boxes to the left;

• the cropping area at the center;

• the statistics box to the right. This shows the statistics concerning the ongoing

acquisitions.

The bottom bar displays an archive of acquisitions (filmstrip).

NOTE

If you want the selected job to be the running and startup job, click on the

Play button before leaving the page.

ICON DESCRIPTION

When the device receives no trigger event, the Monitoring page only dis-

plays the statistics box to the right and a blank filmstrip.

SMART-VS WEBAPP

SMART-VS

To start acquiring objects, two options are available:

Save and Play with External Trigger

Play with Self-Trigger

The Play button is also a Save button: click on it before leaving the page to store any

change.

NOTE

Next to the Play icons, the acquisition results are displayed as green bars for GOOD

objects, red bars for NO GOOD objects, and gray bars for OVERRUN1occurrences.

Click on the Pause icon to stop acquisition and enable all available functions.

Dragging the gray box along the bottom bar displays the acquisitions included in that

interval. You can now perform Incremental Training: click on an acquired image and

select GOOD or NO GOOD to add it to the corresponding acquisition box. It is also possi-

ble to drag and drop acquired images to the GOOD / NO GOOD box or from the GOOD

box to the NO GOOD box and vice versa.

After clicking on one of the Play icons, the newly added acquisitions will be used by the

device in addition to those stored during the initial Teaching procedure.

Furthermore, the Smart-VS WebApp allows image saving. Any image shown in the

WebApp can be saved clicking on it and selecting Save.

NOTE

The following options are also available:

Show all images or just one category

between GOOD, NO GOOD, and OVERRUN

Download the entire filmstrip

NOTE

The Play with Self-Trigger button is not an actual operating mode (output

signals are not driven). It is only intended for demonstration purposes or

preliminary checks in static condition.

1. Overrun occurrences are mostly due to a noisy trigger signal and/or a too fast sequence of

trigger events (e.g. more than two events every 50 ms). Choose a proper Debounce filter time

and/or adjust the line speed to have 20 pieces per second.

It is recommended to enable the browser option “Ask where to save each

file before downloading”.

Selecting the option “Download the entire filmstrip” downloads the last 50

acquisitions.

Table of contents

Other Datalogic Accessories manuals

Datalogic

Datalogic Multi Purpose Holder User manual

Datalogic

Datalogic S5N-PA User manual

Datalogic

Datalogic C-BOX 200 User manual

Datalogic

Datalogic S70 User manual

Datalogic

Datalogic DS2 Ethernet User manual

Datalogic

Datalogic IO-Link TL46 User manual

Datalogic

Datalogic C-BOX 300 User manual

Datalogic

Datalogic IO-Link S8 User manual

Datalogic

Datalogic S8-PR M53 Series User manual

Datalogic

Datalogic S51-PA Series User manual

Datalogic

Datalogic BC9xx0-STAR User manual

Datalogic

Datalogic PowerScan BC9600 Series User manual

Datalogic

Datalogic SRX3 User manual

Datalogic

Datalogic S80-MH-5-YL09 User manual

Datalogic

Datalogic S45-T53 Series User manual

Datalogic

Datalogic S5N-PA W Series User manual

Datalogic

Datalogic DataVS1 User manual

Datalogic

Datalogic BC9XX0-BT User manual

Datalogic

Datalogic IO-Link S5N-P Series User manual

Datalogic

Datalogic Smart-VS Installation and operation manual

Datalogic

Datalogic S8-MR M Series User manual

Datalogic

Datalogic BASIC HOLDER Technical manual

Datalogic

Datalogic S5N-PA User manual

Datalogic

Datalogic IO-Link S100 Series User manual

Popular Accessories manuals by other brands

Hillco

Hillco 2810 Operator's manual

Siemens

Siemens QSA2700D Basic documentation

Contours

Contours ZY024 manual

Saivod

Saivod VS621 manual

Virtuox

Virtuox VirtuCLEAN 2.0 user manual

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS user manual

Z-Wave

Z-Wave HSD-200Z user manual

turck

turck FMX-IM-2UPLI63FX quick start guide

Decagon Devices

Decagon Devices 10HS manual

UPPAbaby

UPPAbaby Cup Holder user manual

Elko

Elko SmartSensor Leakage Wireless manual

Grizzly

Grizzly H8371 instructions

Panasonic

Panasonic HG-T Series user manual

IFM Electronic

IFM Electronic Efector 250 Series Brief instructions

DigiDesign

DigiDesign 888/24 I/O installation guide

PROZIS

PROZIS QUAY user manual

patagonia

patagonia PSI Vest user manual

SFC Energy

SFC Energy EFOY GO! manual