Danfoss Icon Master User manual

VUMBB102 © Danfoss | FHH | 2016.09 | 1

User Guide

Danfoss Icon™Display

Room Thermostat, 230 V

Danfoss Icon™ Display is a room thermostat especially designed for ﬂoor heating systems. It comes in

four diﬀerent designs to suit markets worldwide.

Danfoss Icon™ Display is very intuitive and easy to use. Just set your desired comfort temperature, and

the thermostat will control the room temperature in accordance with your setting.

Introduction

Wake up

the thermostat

Touch the screen to wake up Danfoss Icon™ Display.

The actual room temperature is displayed. The Heating icon is dis-

played, if the thermostat has turned on the heat.

Touch to return to the previous screen.

The screen turns oﬀ after 10 seconds without any action.

Set the temperature Wake up the thermostat

Touch or to set the desired room temperature.

The temperature ﬂashes to indicate setting is in progress.

Conﬁrm your setting by touching .

Reset to default

factory settings

Press and simultaneously for at least 3 seconds to reset Danfoss Icon™ Display to the default

factory settings.

The display toggles between and .

Conﬁrm by touching .

2 | © Danfoss | FHH | 2016.09 VUMBB102

Danfoss A/S

Floor Heating Hydronics • Ulvehavevej 61 • DK-7100 Vejle • Denmark • Phone: +45 7488 8500 • Fax: +45 7488 8501

heating@danfoss.com • www.ﬂoorheating.danfoss.com

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

already on order provided that such alterations can be made without subsequential changes being necessary in speciﬁcations already agreed.

Wake up the thermostat.

Press for 3 seconds to open the User menus and .

Toggle the menus with or .

Choose menu with .

(To open the Installer menus and , press again for 3 seconds).

Temperature limitation

and toggles with the temperature on the screen. Set highest temperature with or .

and toggles with the temperature on the screen. Set lowest temperature with or .

Conﬁrm your choice with .

Default temperature range: 5 to 35° C.

Product ID

Production code.

Menu 3 and 4 are only relevant for the installer

Set actuator type

Choose between Normally Closed or Normally Open with or .

Conﬁrm with .

Set heat emission characteristics of the ﬂoor

Choose Fast , Medium or Slow heat emission characteristics with or .

Conﬁrm with .

Menus

Other manuals for Icon Master

Table of contents

Other Danfoss Thermostat manuals

Danfoss

Danfoss TP4000 Range User manual

Danfoss

Danfoss RAS-C2 Combi User manual

Danfoss

Danfoss Icon Master User manual

Danfoss

Danfoss TPONE-RF User manual

Danfoss

Danfoss living connect User manual

Danfoss

Danfoss FH-WS User manual

Danfoss

Danfoss Living Eco User manual

Danfoss

Danfoss FMT230D Operating instructions

Danfoss

Danfoss LinkFT User manual

Danfoss

Danfoss TP4000 Range User manual

Danfoss

Danfoss ECtemp 532 User manual

Danfoss

Danfoss 140F1143 User manual

Danfoss

Danfoss TP7001 series User manual

Danfoss

Danfoss LX205T User manual

Danfoss

Danfoss TS715 Si Assembly Instructions

Danfoss

Danfoss Eco User manual

Danfoss

Danfoss Link FT User manual

Danfoss

Danfoss living connect Z User manual

Danfoss

Danfoss TP4000 Range User manual

Danfoss

Danfoss RET1000 B User manual

Danfoss

Danfoss SH-E01 User manual

Danfoss

Danfoss RAS-D2 Combi User manual

Danfoss

Danfoss ECL Comfort 210 User manual

Danfoss

Danfoss TP75 User manual

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide