Danfoss ECtemp 330 User manual

MAKING MODERN LIVING POSSIBLE

Installation Guide

ECtemp 330

(-10 to+10°C)

Electronic Thermostat

www.EH.danfoss.com

Danfoss A/S is not liable or bound by warranty if these

instructions are not adhered to during installation or service.

The English language is used for the original instructions.

Other languages are a translation of the original instructions.

Table of Contents

1 Introduction ............... 3

1.1 Technical Specifications ..... 4

1.2 Safety Instructions ........ 5

2Mounting Instructions ......... 6

3Warranty ................. 7

4Disposal Instruction .......... 7

1Introduction

ECtemp 330 is an electronic thermostat to be installed in

electric cabinets with DIN rail attachment. Used primarily

for controlling a lower temperature range as by frost pro-

tection. The thermostat must be installed via an all-pole

disconnection switch. Either a wire sensor or an external air

sensor must be used to measure and control the desired

temperature.

The thermostat has a button to adjust the temperature set-

ting, with a scale from -10° to +10°C. An LED indicator

shows standby periods (green light) and heating periods

(red light).

More information on this product can also be found at:

ectemp.danfoss.com

ECtemp 330 (-10 to +10°C)

Installation Guide 3

1.1 Technical Specifications

Operation voltage 220-240V~, 50Hz

Standby power consumption Max 0.25W

Relay:

Resistive load

Inductive load Max 16A / 3680W @ 230V

cos φ= 0.3 max1A

Sensing units NTC 15kOhm at 25°C

Sensing values:

0°C

25°C

50°C

42kOhm

15kOhm

6kOhm

Hysteresis ± 0.2°C

Ambient temperature 10°C to +50°C

Lowering in economy periods -5°C

Temperature range -10°C to +10°C

Cable specification max 1x4mm2or 2x2,5mm2

Ball pressure temperature 75°C

Pollution degree 2 (domestic use)

Type 1C

Storage temperature -20°C to +65°C

IP class 20

ECtemp 330 (-10 to +10°C)

4 Installation Guide

Protection class Class II -

Dimensions 86 x 36 x 58mm

Weight 83g

The product complies with the EN/IEC Standard "Automatic

electrical controls for household and similar use":

▪EN/IEC 60730-1 (general)

▪EN/IEC 60730-2-9 (thermostat)

1.2 Safety Instructions

Make sure the mains supply to the thermostat is turned off

before installation.

Please also note the following:

▪The installation of the thermostat must be done by an

authorized and qualified installer according to local

regulations.

▪The thermostat must be connected to a power supply

via an all-pole disconnection switch.

▪The sensor is to be considered as live voltage. Have

this in mind if the sensor must be extended.

▪Always connect the thermostat to continuous power

supply.

▪Do not expose the thermostat to moisture, water, dust,

and excessive heat.

ECtemp 330 (-10 to +10°C)

Installation Guide 5

2 Mounting Instructions

Please observe the following placement guidelines:

▪Install the thermostat in an electric cabinet with DIN

rail attachment or a separate DIN attachment accord-

ing to local regulation on IP classes.

▪Do not place the thermostat in a way that it will be ex-

posed to direct sunlight.

Follow the steps below to mount the thermostat:

1. Click the thermostat on to the DIN rail attachment.

2. Connect the thermostat according to the connection

diagram.

IP20

10T50 D330

-10°C to

+10°C

8765

4321 L

Mains

220-240V~

250V~

16 (1) A

Sensor

ECtemp 330 (-10 to +10°C)

6 Installation Guide

The screen of the heating cable must be connected to

the earth conductor of the power supply cable by us-

ing a separate connector.

Note: It is recommended that you install the sensor in

a conduit.

3. Turn on the power supply.

3 Warranty

Y E A R

4 Disposal Instruction

ECtemp 330 (-10 to +10°C)

Installation Guide 7

ECtemp 330 (-10 to +10°C)

8 Installation Guide

ECtemp 330 (-10 to +10°C)

Installation Guide 9

ECtemp 330 (-10 to +10°C)

10 Installation Guide

Other manuals for ECtemp 330

Table of contents

Other Danfoss Thermostat manuals

Danfoss

Danfoss REP24 User manual

Danfoss

Danfoss KP 61 User manual

Danfoss

Danfoss 088U0210 User manual

Danfoss

Danfoss RT52 User manual

Danfoss

Danfoss ECtemp 330 User manual

Danfoss

Danfoss ECtemp 532 User manual

Danfoss

Danfoss LinkFT User manual

Danfoss

Danfoss HC75-3 Operating manual

Danfoss

Danfoss GreenCon RC-C2 User manual

Danfoss

Danfoss ECA 30 User manual

Danfoss

Danfoss DEVI DEVIreg 530 User manual

Danfoss

Danfoss TP4000 Range User manual

Danfoss

Danfoss BasicPlus2 User manual

Danfoss

Danfoss RET M Operating instructions

Danfoss

Danfoss ECL Comfort 310, P314 User manual

Danfoss

Danfoss Icon Master User manual

Danfoss

Danfoss ECtemp 610 User manual

Danfoss

Danfoss ECL Comfort 210 User manual

Danfoss

Danfoss RET2000B-RF User manual

Danfoss

Danfoss ECtemp 316 User manual

Danfoss

Danfoss TP5001 series User manual

Danfoss

Danfoss RET2000B-RF + RX1-S User manual

Danfoss

Danfoss ECtemp 330 User manual

Danfoss

Danfoss FP715Si User manual

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide