Danfoss G 4500 User manual

Installation Guide

How to apply Molycote G 4500 grease

for ICM motor operated valves

© Danfoss A/S (MWA), 2021-01 AN149686416719en-000401 | 1

027R9787

027R9787

Apply the molycote G4500 grease

(supplied with ICAD) to the O-ring

grove on the ICM adapter and

O-ring. Then install the greased

O-ring into the groove on the ICM

adapter as shown in the picture.

Apply another layer of grease over the O-ring

as shown in the picture.

Remove the O-ring on the ICM adapter with

your ﬁngers. Do not use any tool because it

could damage the O-ring.

For ICM in service

If there is any ice or moisture present,

it must be removed prior to applying

the grease. The ice can be melted with

an electric heater or hair dryer.

O-ring

Info for UK customers only:Danfoss Ltd. Oxford Road, UB9 4LH Denham, UK

2 | AN149686416719en-000401 © Danfoss A/S (MWA), 2021-01

Move down

to stop

Close ICM by turning the multi-function

tool counter-clockwise, until it cannot be

tightened further.

Open ICM by turning the multi-function tool

appox. 1 turn clockwise.

Install the ICAD actuator on the ICM adapter

making sure it is pushed completely down.

Fasten the set screws using a 2.5 mm hexagon

key

Set screws

For ICAD already electrical connected

to control system.

Program ICAD to manual mode.

(i01=2).

Install the ICAD actuator on the ICM

adapter making sure it is pushed

completely down. Fasten the set

screws using a 2.5 mm hexagon key.

Program ICAD to calibrate to the

actual ICM valve - i10 (password)

and i26 (selection of ICM size).

Await calibration to ﬁnish.

Return ICAD to normal operation.

(i01=1)

Table of contents

Other Danfoss Engine manuals

Danfoss

Danfoss FCM 300 Series Specification sheet

Danfoss

Danfoss K Frame Series User manual

Danfoss

Danfoss EM-PMI540-T3000 User manual

Danfoss

Danfoss OMS User manual

Danfoss

Danfoss 51 Series User manual

Danfoss

Danfoss Series 20 Setup guide

Danfoss

Danfoss VLT OneGearDrive User manual

Danfoss

Danfoss TMT W FL Setup guide

Danfoss

Danfoss H1B 160 cc User manual

Danfoss

Danfoss H1B 060 User manual

Danfoss

Danfoss H1B060 User manual

Danfoss

Danfoss EM-PMI375-T200 User manual

Danfoss

Danfoss EM-PMI540-T4000 User manual

Danfoss

Danfoss EM-PMI300-T310 User manual

Danfoss

Danfoss 51 Series Setup guide

Danfoss

Danfoss 51 Series User manual

Danfoss

Danfoss EM-PMI240 User manual

Danfoss

Danfoss 51 Series Manual

Danfoss

Danfoss VLT DriveMotor FCP 106 Operating instructions

Danfoss

Danfoss TMM 070 User manual

Danfoss

Danfoss EM-PME375 Series User manual

Danfoss

Danfoss EM-PMI300-T310 User manual

Danfoss

Danfoss VLT OneGearDrive User manual

Danfoss

Danfoss TMTHW Series Manual

Popular Engine manuals by other brands

Rotax

Rotax 125 senior MAX evo installation manual

Kohler

Kohler K361 Service manual

MTD

MTD OHV Series user guide

Kohler

Kohler COMMAND CH18-745 Service manual

Mercury

Mercury D4.2L D-Tronic manual

Selve

Selve SE Plus-RC Series Operating instruction

Perkins

Perkins 1206E-E66TA Operation and maintenance manual

Skov

Skov DA 174 Technical user guide

Rossi

Rossi TX11 Series manual

Siemens

Siemens SIMOTICS T-1FW3 Configuration manual

AL-KO

AL-KO PRO 350 Instructions for use

MTU

MTU 12 V 4000 Lx4 operating instructions

Nanni

Nanni N3.30 Workshop manual

Nanni

Nanni N5.160 CR2 Operator's manual

KSB

KSB SuPreme Series Installation & operating manual

Hiwin

Hiwin EM1 Series user manual

Rotax

Rotax 912 i series Service instructions

Siemens

Siemens SIMOTICS XP 1MB1 operating instructions