Daikin BRC1E62 User manual
BRC1E62
WIRED REMOTE
CONTROLLER
OPERATION MANUAL
Thank you for purchasing this product.
This manual describes safety precautions required for the use of the
product.
Read this manual carefully and be sure you understand the
information before using the product.
Keep this manual where it is readily accessible after reading it through.
If another user operates the product in the future, be sure to hand over
this manual to the new user.
Refer to the operation manuals attached to the indoor and outdoor units,
etc.
1
Contents
Notices Safety Precautions
– Items to be Strictly Observed – ............................ 2
Button Location and Descriptions............................. 5
Names and Functions............................................... 7
Basic Operation
(Use of Direct Buttons)
Cool/Heat/Auto/Fan Operation ............................... 11
Dry Operation ......................................................... 15
Setback................................................................... 17
Ventilation Operation .............................................. 18
Setting the Cool/Heat Selection Eligibility............... 19
Key Lock................................................................. 21
Quick Reference Main Menu Main Menu Items.................................................... 23
Menu Manipulation Manipulating the Main Menu Screen...................... 27
...................................... 28
Quick Start (SPLIT system only) ............................ 30
Ventilation............................................................... 32
Energy Saving Options........................................... 34
Schedule................................................................. 42
Filter Auto Clean ..................................................... 48
Maintenance Information........................................ 49
.......................................................... 50
Current Settings...................................................... 54
Clock & Calendar.................................................... 55
Language................................................................ 58
Maintenance Reset Filter Indicator .............................................. 59
Cleaning of Remote Controller ............................... 60
Reference Information Malfunction (Error) Code Display ........................... 61
After-sales Service ................................................. 62
2
Safety Precautions
Read the safety precautions carefully for the proper use of the product.
This manual classifies the precautions into WARNINGS and CAUTIONS.
WARNING
result in death or serious injury.
CAUTION
result in minor or moderate injury.
It may also be used to alert against unsafe practices.
WARNING
Do not install the remote controller by yourself.
Consult your local dealer.
Do not modify or repair the remote controller.
Consult your local dealer.
Do not relocate or reinstall the remote controller by yourself.
Consult your local dealer.
product.
Do not wipe the product with benzine, thinner, chemical dustcloth, etc.
The product may get discolored or the coating peeled off.
– Items to be Strictly Observed –
3
CAUTION
Do not allow children to play with the remote controller.
Accidental operation by children may result in health impairment.
Do not disassemble the product.
Consult your local dealer for internal inspections and adjustments.
Do not press the button of the remote controller with a hard, pointed object.
The remote controller may be damaged.
Do not pull or twist the electric wire of the remote controller.
It may cause the unit to malfunction.
Do not wash the remote controller.
Do not locate the remote controller wherever there is a risk of wetting.
components.
4
5
Button Location and Descriptions
3. Menu/Enter button
8. ON/OFF button
10. Cancel button
9. Operation lamp
(Green)
11. LCD (with backlight)
4. Up button
5. Down button
6. Right button
7. Left button
1. Mode Selector button
manipulable directly by the above button.
Advanced settings are manipulable from the Menu screen displayed
by the Menu/Enter button.
NOTE
Do not press the buttons on the remote controller with a hard, pointed objects.
Otherwise, the remote controller may be damaged or malfunction.
6
1. Mode Selector button
Use to select the operation mode of your
preference. (Refer to page 11.)
*
model.
2.
screen. (Refer to page 12.)
*
3. Menu/Enter button
Used to indicate the Main Menu.
(Refer to page 23 for the menu items.)
Used to enter the setting item selected.
4. Up button " "
Used to raise the set temperature.
Use to highlight the item above the current
selection.
pressed.)
Used to change the item selected.
*
""
5. Down button " "
selection.
Used to change the item selected.
*
" "
6. Right button " "
Used to highlight the next items on the
right-hand side.
Display contents are changed to next
screen per page.
*
""
7. Left button " "
Used to highlight the next items on the
left-hand side.
Display contents are changed to previous
screen per page.
*
""
8. ON/OFF button
stop.
9. Operation lamp (Green)
This lamp lights up during operation.
This lamp blinks if a malfunction occurs.
10.Cancel button
Used to return to the previous screen.
11.LCD (with backlight)
30 seconds by pressing any operation
is lit. (Excluding the ON/OFF button)
If 2 remote controllers are used to control a
7
Names and Functions
Basic Screen
The Standard display screen is set by default.
(Refer to
page 51.)
Standard display screen
Auto
This function not available
<Standard display example>
1.Operation mode
12.Setback
8.Key Locked
6.Message
9.Timer Enabled
Set to
Cool
Heat
28°C
20°C
7.
Ventilation/Air purifying
10.Centralized Control
11.Changeover Under Control
4.Set/Setback
Temperature display
5.Defrost/Hot start
2.
Airflow Rate (Air
Volume/Fan Speed)
3.Airflow Direction
(Displayed only when the air
conditioner is in operation.)
Detailed display screen
The clock, and selectable display items appear on the detailed
display screen in addition to the items appearing on the standard
display screen.
Room
20°C
Auto
Cool
Heat 35
°C
10
°C
Setback
Fri
11:03
14.
Selectable Display Item
(with room
temperature selected)
13.Clock (12/24 hours
time display)
<Detailed display example 1>
4.
Set/Setback
Temperature display
Auto
--
:
--
Cool
Heat
28
°C
20
°C
Set to
<Detailed display example 2>
2.Airflow Rate
(Air Volume/Fan
Speed) is not appear
(No airflow rate
control function)
13. Clock
(No clock setting)
3.Airflow Direction
is not appear
(No airflow direction
function)
15. Timer Disabled/
Reset Clock
14. Selectable Display
Item
(No selectable display
item selected)
8
1. Operation Mode
"Auto".
2.
Speed)
indoor unit.
control function.
3. "
(Refer to page 13).
This icon is not displayed if the indoor unit
directions.
4. Set/Setback Temperature display
"Set
to" indicates the set temperatures that are
set for the air conditioner.
"Setback" indicates the setback
temperatures that are set for the air
conditioner.
5. Defrost/Hot start " "
(Refer to page 14.)
Displays if the Defrost/Hot start operation is active.
If ventilating operation " " is displayed:
is connected.
of the Heat Reclaim Ventilator.
6. Message
The following messages are displayed.
"This function not available."
operation button is pressed and the indoor
unit does not have the corresponding
function.
function.
"Error: Push Menu button"
"Warning: Push Menu button"
(Refer to page 61).
"Quick Start" (Split system only)
Displayed if the quick cooling/heating
function is turned on (Refer to page 30).
"Time to clean element"
or element has come (Refer to
page 59).
7. Ventilation/Air Purifying
is connected.
Ventilation Mode icon." "
These icons indicate the current ventilation
mode (Heat Reclaim Ventilator only)
"
This icon indicates that the Air Purifying
unit (optional accessory) is in operation.
8. Key Locked " "
(Refer to page 21.)
9. Timer Enabled " "
(Refer to page 40 and 47.)
Displayed if the Schedule timer or
OFF timer is enabled.
9
10.Centralized Control " "
Displayed if the system is under the
management of centralized control
equipment (optional accessories) and the
operation of the system through the remote
controller is prohibited.
11. Changeover Under Control " "
(VRV only)
Displayed if the remote controller has no
cool/heat selection eligibility. (Refer to
page 19).
12.Setback " " (Refer to page 17.)
conditioner is turned on under the setback
control.
13.Clock (12/24 hours time display)
(Refer to
page 55).
displayed.
14.Selectable Display Item
selected (Refer to page 51).
No detailed items are selected by default.
15.Timer Disabled/Reset Clock " "
reset.
unless the clock is reset.
Other manuals for BRC1E62
4
Table of contents
Other Daikin Remote Control manuals
Daikin
Daikin BRC7E530W User manual
Daikin
Daikin SRC-COA User manual
Daikin
Daikin BRC1H519W User manual
Daikin
Daikin BRC1H71W User manual
Daikin
Daikin GS02 User manual
Daikin
Daikin DCS302C51 User manual
Daikin
Daikin BRC230Z4B User manual
Daikin
Daikin BRC1E63 User manual
Daikin
Daikin BRC1H71W User manual
Daikin
Daikin Madoka User manual
Daikin
Daikin BRC7E530W8 User manual
Daikin
Daikin BRC7F532F User manual
Daikin
Daikin BRC1E71 User manual
Daikin
Daikin BRC1H51W User guide
Daikin
Daikin FTXN-L9 User manual
Daikin
Daikin BRC082A41W User manual
Daikin
Daikin BRC7EA63W User manual
Daikin
Daikin BRC1E52B7 User manual
Daikin
Daikin WRC-COA User manual
Daikin
Daikin BRC7E61W User manual
