Daewoo DWD-VF80M1 User manual

Service Manual

Washing Machine

Model: DWD-VF80M1

S/M No. : WDVF80M001

Jul. 2007

✔Caution

: In this Manual, some parts can be changed for improving,

their performance without notice in the parts list. So, if you

need the latest parts information, please refer to PPL(Parts

Price List) in Service Information Center (http://svc.dwe.co.kr).

SHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASH

TO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AU

SHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASH

TO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AU

SHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASH

TO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AU

SHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASH

WASHING MACHINE

CCoonntteennttss

1. SPECIFICATIONS....................................................................................................................2

2. INSTALLATION........................................................................................................................3

Removing transit bolts...................................................................................................3

Location of washer.........................................................................................................3

Inlet hose connection.....................................................................................................4

Electrical requirements..................................................................................................5

Drain system ...................................................................................................................5

Level adjustment.............................................................................................................5

3. OPERATING YOUR WASHER................................................................................................7

4. DIRECTION FOR DISASSEMBLY..........................................................................................9

5. THE FUNCTIONS OF THE CONTROL PANEL....................................................................20

6. FAILURE CODES...................................................................................................................22

1. SPECIFICATIONS

SPECIFICATIONS

■ Accessories

Drain hose Inlet hose Manual Cap holder(4EA)

Dimension (mm)

Maximum mass of dry clothes (Kg)

Unit Weight (kg)

Power Source

Power Consumption

Operating Water Pressure

596 x 850 x 510 (WxHxD)

5.0

62(Net) / 67(Gross)

220~240V / 50Hz

2200W

0.1MPa ~ 1MPa

MODEL DWD-VF80M1

ADJUSTABLE LEG

CONTROL PANEL

DOOR

DETERGENT CASE

INLET HOSE

KICKPLATE

POWER CORD

HOSE DRAIN

2. INSTALLATION

INSTALLATION

■ Removing transit bolts

1. Before operating the washer, remove the four transit bolts which are located at the rear of the washer.

• If the bolts are not removed, it may cause heavy vibration, noise and malfunction.

2. Unscrew the 4 bolts with the suitable spanner. Keep the 4 bolts and spanner for future use.

• Whenever the appliance is transported, the transit bolts must be refitted.

3. The plastic parts located inside the washer will fall down under the machine.

• If all of them have not fallen down, open the washer door and move the drum until all plastic parts fall

down.

• Lift the washer slightly and pick up the plastic parts.

• To the holes where the transit bolts have been removed, insert the plastic cap holders supplied.

■ Location of washer

• Check location where the washer will be installed. Make sure you have everything necessary for correct

installation.

• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.

• Do not place or store laundry products on top of washer at any time.

• Install washer on an even, horizonal, non-slippery and tough floor. If the

washer is installed on an unsuitable floor, it could make considerable

noise, vibrate severely and cause a malfunction. If the washer is not

level, adjust leg up or down for horizontal installation.

• Ventilation openings must not be obstructed by carpeting when the

washer is installed on a carpeted floor.

• Leave space around the washer upon installation (right and left: 2cm,

rear: 10cm)

• In case of built-in installation, the distance between top of the washer

and bottom of upper plate should be at least 3mm.

Laundry

Tub

Washer

approx.

2cm

Drain Hose

INSTALLATION

■ Inlet hose connection

The washer should be connected to the water mains using new hose sets, old hose sets should not be reused.

• Your machine has a single water (cold) inlet.

• To prevent from the leakages on the connection joints, 1 seal is included in the hose packing. (Fit this seal on

the end of the water inlet hose at the tap side.)

• Connect the end with bracket of the water inlet hose to the water inlet valve at the rear of the machine and the

other end to your tap. In situations where you are not assured, let a qualified plumber make the connection

works.

• Water pressure of 1-10 bars from your tap will enable your machine to work more efficiently. (1 bar pressure

means water flow of more than 8 liters in 1 minute from a fully opened tap).

• After connections are completed, check for the non-leakage of the connection joints by turning on your tap

completely.

• Be sure that water inlet hoses are not folded, broken or crushed.

• Mount the water inlet hoses to a 3”/4, geared water tap.

INSTALLATION

■ Electrical requirements

•

The washer should be connected to the water mains using new hose sets, old hose sets should not be reused.

■ Drain system

• Never forget to install drain hose before operating your washer.

• Open the packing box, and there is a drain hose inside the drum.

• Connect the drain hose to the drain outlet at the back side of the washer.

• Top of laundry tub must be at least 60cm high and no higher than 100cm from the floor.

• When installing the drain hose to tub (sink), secure it tightly with a string.

• Proper securing of the drain hose will protect the floor from damage due to water leakage.

• When the drain hose is too long, do not force it back into the washer. This will cause abnormal noise.

• Electrical earth is required on this washer

• If it does not fit the outlet, have a proper outlet

installed by a qualified electrician.

• Do not earth to a gas pipe.

• Do not change the power supply cord plug.

• Check with a qualified electrician if you are not

sure the washer is properly earthed.

WARNING

Recommended earthing method

Electrical shock hazard : Failure to follow these instructions could result in death or serious

injury.

For your personal safety, this washer must be earthed.

This washer is equipped with a power supply cord ‘A’ having a earthing plug ‘B’.

To minimize possible shock hazard, the cord must be plugged into a mating earth-

ing-type wall receptacle ‘C’. If a mating wall receptacle is not available, it is the

personal responsibility and obligation of the customer to have the proper earthed

wall receptacle installed by a qualified electrician.

■ Level adjustment

1If the washer is installed on an unsuit-

able floor, it could make considerable

noise, vibrate and cause a malfunction.

INSTALLATION

2Adjust the level of washer using adjustable legs.

•Please check if there is any gap between the four

adjustable legs and the floor.

•Turning adjustable legs by the enclosed spanner,

adjust the level of washer and make it sure that

there is no swaying of washer.

•After the adjustment is finished, turn the fixing

nuts up tightly so that the washer maintains the

adjustment.

•Never put cartons, wooden block or similar

meterials

3Make it sure that the washer does not sway when you press down the four corners of the washer's

top plate.

Fixing Nut

NOTE

There should be no swaying of washer and all the

adjustable legs should stick to the floor closely.

adjustable leg

INSTALLATION

3. OPERATING YOUR WASHER

To obtain the best washing results, you must operate your washer properly.

This section gives you this important information.

•Close zippers, snaps and hooks to avoid snagging

other items.

Remove pins, buckles and other hard objects to

avoid getting them caught inside the washer or

scratching the washer interior.

•Empty pockets and pull them inside out.

•Turn down cuffs and turn synthetic knits inside out

to avoid pilling.

•Tie strings and sashes to avoid tangling.

•Treat spots and stains.

(See “Removing stains”on page 21)

•Wash your small clothes like socks and handker-

chiefs in a washing bag.

Preparing clothes for washing

•Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together.

•Separate dark colors from light colors, colorfast items from non-colorfast item.

Sorting

Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.

Color (White, Lights, Darks) Separate white clothes from colored clothes.

Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately.

MAINTENANCE

•Drop items into washer loosely. Items should move

easily through wash water for best cleaning and

wrinkle-free results.

•Load washer properly.

Overloading and selecting a setting too small for

the wash load can :

- Cause poor cleaning

- Increase wrinkling

- Create excessive lint

- Wear out items faster (because of pilling)

•Mix large and small items in each load. Load even-

ly to maintain washer balance.

An unbalanced load can make the washer vibrate

during spin.

•When you shut the door of the washer, be careful

so that no cloth is jammed between the door and

the gasket.

•Shut the door tightly or your washer will not start

the operation.

1Detergent case 2Adding fabric softener

•If desired, add measured liquid fabric softener to

the softener inlet.

•Pour liquid fabric softener into the dispenser

using the amount recommended on the pack-

age.

•Do not exceed the maximum fill line. Overfilling can

cause early dispensing of the fabric softener which

could stain clothes.

•Do not open the detergent case when water is

supplied.

•Avoid pouring fabric softener directly on the

clothes.

Filling detergent

Fabric softener

Main wash(2) Pre wash(1)

DIRECTION FOR DISASSABLY

4. DIRECTION FOR DISASSEMBLY

DISASSEMBLY

TOP PLATE

Remove two screws that fix the top-plate at

the back. Push the top-plate back and pull it up.

DOOR

Remove two screws that fix the door. Pull the door up.

Remove nine screws that fix the door group. Remove the door inside plastic as it is shown

in the picture.

Table of contents

Other Daewoo Washer manuals

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide

Beko

Beko WKB 51231 PTMA manual