D-Link DVG-N5402FF User manual

Quick Installation Guide

DVG-N5402FF

VoIP Wireless Router

Check Your Package Contents

DVG-N5402FF

VoIP Router

Phone Cord X 2 Ether Cable

(CAT5 UTP)

12VDC, 2A

Power Adapter

Using a

power adapter

with a different

voltage rating will

damage this

product and void

the warranty.

Antenna X 2 Stand CD-ROM

Front Panel

Power：Solid indicates a connection to a good power source.

Prov./Alm：A blinking light indicates the DVG-N5402FF can not register with SIP Server or

can not get the IP address. A blinking light also indicates the DVG-N5402FF is attempting

to connect with the Provisioning server. Once the service connects, the LED will turn off.

The LED will light solid red if the self-test or boot-up fails.

Reg.：The Register LED will turn on and continuously working when DVG-N5402FF is

connected to a VoIP service provider. The LED will flash if not connected to a service

provider.

WAN：When a connection is established the LED will light up solid. The LED will blink to

indicate activity. If the LED does not light up when a cable is connected, verify the cable

connections and make sure your devices are powered on.

WLAN：A steady light indicates a wireless connection. A blinking light indicates that DVG-

N5402FF is receiving/ transmitting from/to the wireless network

LAN：When a connection is established the LED will light up solid on the appropriate port.

The LEDs will blink to indicate activity. If the LED does not light up when a cable is

connected, verify the cable connections and make sure your devices are powered on.

USB：This indicates that DVG-N5402FF detects a supported 3G USB dungle or a USB

device.

Phone：This LED displays the VoIP status and Hook activity on the phone port that is used

to connect your normal telephone(s). If a phone connected to a phone port is off hook or in

use, this LED will light solid. When a phone is ringing, the indicator will blink.

WPS: Flashing in blue as DVG-N5402FF processing WPS-PBC wireless connecting

progress.

Hardware Overview

Rear Panel

1. WiFi Switch: Turn on/off wireless LAN.

2. Phone Port (1-2): Connect to your phones using standard phone

cabling (RJ-11).

3. USB: Connect to a 3G USB dungle or a printer.(This feature is

optional.)

4. LAN: Connect to your Ethernet enabled computers using Ethernet

cabling.

5. WAN: Connect to your broadband modem using an Ethernet cable.

6. Ground: A conducting connection with the earth. Connect with the

ground so as to make the earth a part of an electrical circuit using

metal wire.

7. Power Receptor: Receptor for the provided power adapter.

8. Power Switch: Press down to turn-on DVG-N5402FF.

Hardware Overview (continued)

1. WPS: WPS button for wireless WPS-PBC setup method.

2. Antenna: Connect to antenna for wireless network.

3. Reset: Keep pressing 6 seconds to restore DVG to be factory

default.

A. Insert one end of the Ethernet cable into the Ethernet (LAN) port on

the back panel of the DVG-N5402FF and the other end of the cable

to an Ethernet Adapter or available Ethernet port on your computer.

B. Insert one end of the Ethernet cable into the WAN port on the back of

the DVG-N5402FF and the other into your cable/DSL modem or the

LAN port of your router.

Installing the Hardware

Hardware Overview (continued)

B1. If the ISP provides optical WAN, insert SFP module into optical cage

then insert optical patch code.and connect a switch.

C. Insert a telephone cable into the Phone port, and then connect the

cable to your telephone.

D. Connect the power adapter to the power input at the back panel of

the DVG-N5402FF and then plug the other end of the power adapter

to a wall outlet or power strip then press power switch. On the front of

the device, the Power LED will turn On to indicate proper operation.

E. Check the LED display on the front of the VoIP Wireless Router to

confirm that the connections have been made.

Installing the Hardware (continued)

After the installations are completed, your network should look similar to

the diagram below.

Hardware configuration is complete! If your VoIP service is already activated, you

can make phone calls now.

Installing the Hardware (continued)

Configuration

To access the web-based configuration utility, open a web browser such

as Internet Explorer and enter the IP address of the DVG-N5402FF.

Open your Web browser and

type http://192.168.8.254 into

the URL address box. Press

the Enter or Return Key.

Click Login to enter Web Site.

Click Setup Wizard.

Configuration (continued)

The username of ADMIN and USE

have been defined and locked by

default. It is highly recommended to

create a login password to keep

your router secure.

Enter a NTP server or use the

default server.

Click Next.

Configuration (continued)

Select your Internet connection type:

DHCP – Most Cable ISPs or if you

are connecting the DVG-N5402FF

behind a router.

Static IP – Select if your ISP

supplied you with your IP settings.

PPPoE – Most DSL ISPs.

PPTP – Select if required by you

ISP.

WAN1 Domain Name Server

–

Select Manual to manually enter IP

address of DNS or select Auto i

DNS is assigned by ISP.

by clicking Enable support of SIP

Proxy Server. Enter Proxy

Server IP/Domain and Port.

The Outbound Proxy Support is

optional. To register, please clic

on the Outbound Proxy Support

check box and enter Outbound

Proxy IP/Domain and Port in it.

Registration by phone line: enter

Number, User ID/Account and

Password supplied by your ITSP.

Click on the Register check box to

Click Next.

Configuration (continued)

Setup is finished. Check the

summary of your settings. To

make new settings effective, you

must click on the Restart button

to reboot the DVG-N5402FF.

Click Restart.

Click on the Enable wireless LAN

interface check box to build a

wireless network. Enter the SSID to

name your wireless network. All

devices must have the same SSID

to communicate on the wireless

network. Select a wireless channel.

Select the 802.11 Mode of your

network which can work in different

speed of wireless connection.

Click Next.

Select your wireless security modes

for your wireless network.

Click Next

Other manuals for DVG-N5402FF

Table of contents

Other D-Link Wireless Router manuals

D-Link

D-Link DIR-451 - 3G Mobile Router User manual

D-Link

D-Link DWR-712 User manual

D-Link

D-Link DHP-1220AV User manual

D-Link

D-Link GO-RT-AC750 User manual

D-Link

D-Link DI-714 User manual

D-Link

D-Link DWR-730 User manual

D-Link

D-Link DSL-G624T User manual

D-Link

D-Link DSL-2730U User manual

D-Link

D-Link DSL-2730B Installation and user guide

D-Link

D-Link DIR-600L User manual

D-Link

D-Link AirPlus DWL-G730AP User manual

D-Link

D-Link DIR-L1900 User manual

D-Link

D-Link DI-524UP Mounting instructions

D-Link

D-Link DI-724U - Wireless 108G QoS Office Router User manual

D-Link

D-Link N 150 User manual

D-Link

D-Link DIR-818LW User manual

D-Link

D-Link DSR-500AC User manual

D-Link

D-Link DI-713 User manual

D-Link

D-Link DSL-2750U User manual

D-Link

D-Link DIR-826L User manual

D-Link

D-Link DIR-816L User manual

D-Link

D-Link EXO DIR-1360 User manual

D-Link

D-Link DIR-810L User manual

D-Link

D-Link COVR-1900 User manual

Popular Wireless Router manuals by other brands

Milesight

Milesight UG67 user guide

Airlogic

Airlogic AirSync Class 1 Features

Samsung

Samsung WCH730B user manual

TELEFONICA

TELEFONICA USB Adapter quick start guide

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series quick start

Askey

Askey RAC2V1K user manual

Alloy

Alloy WLF2454AP-S user guide

TP-Link

TP-Link TL-WR542G user guide

NETGEAR

NETGEAR WNR2000v4 user manual

Hama

Hama 53120 Operating instruction

Intellinet

Intellinet 524582 user manual

Asus

Asus RT-N10P user guide

Sapido

Sapido GR297n user manual

Asus

Asus DSL-N55U user guide

AMTC

AMTC WR7502 user guide

Compaq

Compaq CP-2W - iPAQ Connection Point manual

SMC Networks

SMC Networks WBR14-N2 FICHE user guide

Draytek

Draytek Vigor2120 Series user guide