D-Link DSL-2750E Setup guide

Step 1: Connect device

1.1 Connect telephone line from wall outlet to DSL-2750E directly or

1.2 If you wish to use internet and your telephone at the same time, please use the splitter that

comes with the packaging box.

The splitter has three ports:

LINE: Connect to a wall phone jack (RJ-11 jack)

Modem: Connect to the Line interface of the router

PHONE: Connect to a telephone set

1.3 Use LAN Cable (CAT5E: RJ45) to connect your computer to any LAN port of DSL-2750E.

Step 2: Login to Router

2.1 Open Web Browser (Internet Explorer, Firefox, Google Chrome) and enter

http://192.168.1.1 on the Address Bar.

2.2 On the login page, please enter username and password and click ‘Login’.

Default Username and Password:

Username: admin

Password: admin

Step 3: On the device Setup page, please click on ‘Setup Wizard’ to run the step-by-step

configuration wizard.

3.1 Click ‘Next’ to continue.

3.2 The Time Configuration option allows you to configure, update, and maintain the correct

time on the internal system clock. From this section, you can enable or disable Daylight Saving

and set the time zone that you are in and set the NTP (Network Time Protocol) Server. Click

"Next" to proceed to next step.

3.3 PPPoE Configuration:

3.3.1 Please select Country: Malaysia

3.3.2 ISP: Please select your Internet Service Provider (such as: Streamyx-PPPOE)

After you have selected your Internet Service Provider, the wizard will fill up VPI and VCI

setting automatically.

3.3.3 Protocol: Select PPPoE

Please insert your PPPoE username and password (these parameter comes from your Internet

Service Provider).

Enter password twice (Password and Confirm Password)

Click Next.

3.4 Wireless (WIFI) Setup:

3.4.1 Check the ‘Enable Your Wireless Network’ box.

3.4.2 Enter your preferred wireless network name (SSID).

3.4.3 Enter your wireless encryption key. If you do not want to setup Wireless Security, please

Select ‘None’.

Example of WPA key configuration: Select WPA2 , WPA2 Pre-Shared Key is 12345678

Click Next.

Step 4: Change administrator password:

Default Username and Password:

Username: admin

Password: admin

4.1 If you do not wish to change the administrator password, please click ‘Skip’

4.2 Please follow steps below if you wish to change password,

Current Password: Insert current Password (Default Password is admin)

New Password: Insert new Password

Confirm Password: Insert new Password again

Click Next.

Step 5: This page shows a summary of setup that you have just completed. Click Apply.

Step 6: The device will reboot. You may start using the device after rebooted successfully.

Other manuals for DSL-2750E

12

Table of contents

Other D-Link Wireless Router manuals

Popular Wireless Router manuals by other brands

Milesight

Milesight UG67 user guide

Airlogic

Airlogic AirSync Class 1 Features

Samsung

Samsung WCH730B user manual

TELEFONICA

TELEFONICA USB Adapter quick start guide

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series quick start

Askey

Askey RAC2V1K user manual

Alloy

Alloy WLF2454AP-S user guide

TP-Link

TP-Link TL-WR542G user guide

NETGEAR

NETGEAR WNR2000v4 user manual

Hama

Hama 53120 Operating instruction

Intellinet

Intellinet 524582 user manual

Asus

Asus RT-N10P user guide

Sapido

Sapido GR297n user manual

Asus

Asus DSL-N55U user guide

AMTC

AMTC WR7502 user guide

Compaq

Compaq CP-2W - iPAQ Connection Point manual

SMC Networks

SMC Networks WBR14-N2 FICHE user guide

Draytek

Draytek Vigor2120 Series user guide