D-Link DIR-632 User manual

Quick Installation Guide

DIR-632

Multifunction Wireless Router

Supporting WiMAX, 3G GSM/CDMA

wit Built-in 8-port Switc

DIR-632 Quick Installation Guide

BEFORE YOU BEGIN

Delivery Package

•Wireless router DIR-632

•Power adapter DC 5V/2.5A

•Straight-through thernet cable (CAT 5 )

•CD-ROM with “User Manual” and “Quick Installation Guide”

•“Quick Installation Guide” (brochure)

If any of the items are missing, please contact your reseller.

!Using a power supply with a different voltage rating than the one

included will cause damage and void the warranty for this product.

Default Settings

IP address o wireless router 192.168.0.1

Username (login) admin

Password admin

Name o wireless network (SSID) DIR-632

DIR-632 Quick Installation Guide

System Requirements and Equipment

•A computer with any operating system that supports a web browser.

•A web browser to access the web-based interface of the router: Windows

Internet xplorer, Mozilla Firefox, or Opera.

•A NIC ( thernet or Wi-Fi adapter) to connect to the router.

•An 802.11b, g, or n Wi-Fi adapter to create a wireless network.

•A USB modem to connect to the Internet1.

◦A WiMAX USB modem to connect to the Internet via a WiMAX

network.

Some WiMAX operators require subscribers to activate their WiMAX

USB modems prior to using them. Please, refer to connection

guidelines provided by your operator when concluding the agreement

or placed on its website.

◦A 3G USB modem to connect to the Internet via a 3G GSM or

CDMA network.

Your USB modem should be equipped with an active identification

card (SIM or R-UIM) of your operator.

It is recommended to disable the PIN code check on the identification

card prior to connecting the USB modem to the router.

1 Contact your operator to get information on the service coverage and fees.

DIR-632 Quick Installation Guide

Supported USB Modems

GSM modems

•Huawei 150

•Huawei 1550

•Huawei 160G

•Huawei 169G

•Huawei 173

•Huawei 220

•ZT MF112

•ZT MF192

•ZT MF626

•ZT MF627

•ZT MF652.

CDMA modems

•Anydata ADU-500A

•Celot CT-650.

WiMAX modem

•Samsung SWC-U200 (firmware version u200_rev1-2.7.40-CI14).

!The manufacturer does not guarantee proper operation of the router

with every modification of the firmware of USB modems.

DIR-632 Quick Installation Guide

CONNECTING TO PC (OS WINDOWS XP)

PC wit Et ernet Adapter

1. Make sure that your PC is powered off.

2. Connect an thernet cable between any of LAN ports located on the back

panel of the router and the thernet port of your PC.

3. To connect via a WiMAX, 3G GSM or CDMA network: connect your

USB modem to the USB port2 located on the back panel of the router.

If you need to connect or change a USB modem to another one when

the router is powered on, power off the router, connect the modem to

the USB port, and power on the router.

4. Connect the power cord to the power connector port on the back panel of

the router, then plug the power adapter into an electrical outlet or power

strip.

5. Turn on your PC and wait until your operating system is completely

loaded.

Now you should configure your PC to obtain an IP address automatically (as

DHCP client).

1. Click the Start button and proceed to the Control Panel > Network

and Internet Connections > Network Connections window.

2 It is recommended to use a USB extension cable to connect a USB modem to the

router.

DIR-632 Quick Installation Guide

2. In the Network Connections window, right-click the relevant Local

Area Connection icon and select the Properties line in the menu

displayed.

3. In the Local Area Connection Properties window, on the General

tab, in the This connection uses the ollowing items section, select

the Internet Protocol (TCP/IP) line. Click the Properties button.

DIR-632 Quick Installation Guide

4. Select the Obtain an IP address automatically radio button. Click

the OK button.

Click the ОК button. Now your computer is configured to obtain an IP address

automatically.

DIR-632 Quick Installation Guide

PC wit Wi-Fi Adapter

1. To connect via a WiMAX, 3G GSM or CDMA network: connect your

USB modem to the USB port3 located on the back panel of the router.

If you need to connect or change a USB modem to another one when

the router is powered on, power off the router, connect the modem to

the USB port, and power on the router.

2. Connect the power cord to the power connector port on the back panel of

the router, then plug the power adapter into an electrical outlet or power

strip.

3. Turn on your PC and wait until your operating system is completely

loaded.

4. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in

wireless NICs are equipped with a button or switch that turns on/off the

wireless adapter (refer to your PC documents). If your PC is equipped

with a pluggable wireless NIC, install the software provided with your

Wi-Fi adapter.

3 It is recommended to a use USB extension cable to connect a USB modem to the

router.

DIR-632 Quick Installation Guide

Now you should configure your Wi-Fi adapter.

1. Click the Start button and proceed to the Control Panel > Network

and Internet Connections > Network Connections window.

2. Select the icon of the wireless connection and make sure that your Wi-Fi

adapter is on.

3. Search for available wireless networks.

4. In the opened Wireless Network Connection window, select the

needed wireless network (DIR-632) and click the Connect button.

After that the Wireless Network Connection Status window appears.

DIR-632 Quick Installation Guide

CONFIGURING ROUTER

Connecting to Web-based Interface

1. Start a web browser.

2. In the address bar of the web browser, enter the IP address of the router

(by default, the following IP address is specified: 192.168.0.1). Press

the Enter key.

3. On the opened page, enter the username (login) and password for the

administrator account (by default, the following username and password

are specified: admin, admin). Then click the Enter link.

If the error “ The page cannot be displayed ” (or “ Unable to display the

page ”/“ Could not connect to re ote server ”) occurs upon connecting to

the web-based interface of the router, make sure that you have properly

connected the router to your computer.

Other manuals for DIR-632

Table of contents

Other D-Link Wireless Router manuals

Popular Wireless Router manuals by other brands

Milesight

Milesight UG67 user guide

Airlogic

Airlogic AirSync Class 1 Features

Samsung

Samsung WCH730B user manual

TELEFONICA

TELEFONICA USB Adapter quick start guide

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series quick start

Askey

Askey RAC2V1K user manual

Alloy

Alloy WLF2454AP-S user guide

TP-Link

TP-Link TL-WR542G user guide

NETGEAR

NETGEAR WNR2000v4 user manual

Hama

Hama 53120 Operating instruction

Intellinet

Intellinet 524582 user manual

Asus

Asus RT-N10P user guide

Sapido

Sapido GR297n user manual

Asus

Asus DSL-N55U user guide

AMTC

AMTC WR7502 user guide

Compaq

Compaq CP-2W - iPAQ Connection Point manual

SMC Networks

SMC Networks WBR14-N2 FICHE user guide

Draytek

Draytek Vigor2120 Series user guide